aclnnForeachDivScalarV2

📄 View Source Code

Applicable Products

Function

• Description: Computes the tensor list x divided by the scalar. Compared with aclnnForeachDivScalar, this API changes the structure type of the input parameter scalar from aclTensor to aclScalar. Select the appropriate API based on the actual situation.

• Formula:

  $$x = [{x_0}, {x_1}, ... {x_{n-1}}]\\ y = [{y_0}, {y_1}, ... {y_{n-1}}]\\$$ $${\rm y}_i = \frac{x_i}{{\rm scalar}} (i=0,1,...n-1)$$

Function Prototype

Each operator is divided into a two-phase API. You must first call the "aclnnForeachDivScalarV2GetWorkspaceSize" API to obtain the input parameters and calculate the required workspace size based on the computation process, and then call the "aclnnForeachDivScalarV2" API to perform the computation.

aclnnStatus aclnnForeachDivScalarV2GetWorkspaceSize(
  const aclTensorList *x,
  const aclScalar     *scalar,
  aclTensorList       *out,
  uint64_t            *workspaceSize,
  aclOpExecutor      **executor)

aclnnStatus aclnnForeachDivScalarV2(
  void          *workspace,
  uint64_t       workspaceSize,
  aclOpExecutor *executor,
  aclrtStream    stream)

aclnnForeachDivScalarV2GetWorkspaceSize

• Parameters

  Parameter	Input/Output	Description	Instruction	Data Type	Data Format	Dimension (Shape)	Non-contiguous Tensor
  x (aclTensorList*)	Input	Represents the first input tensor list for the division operation. Corresponds to `x` in the formula.	Supports empty tensors. All tensors in this parameter must have the same data type.	FLOAT32, FLOAT16, BFLOAT16	ND	0-8	×
  scalar (aclScalar*)	Input	Represents the second input scalar of the division operation, corresponding to `scalar` in the formula.	The data type has a certain correspondence with the data type of the input parameter `x`: When the data type of `x` is FLOAT32 or BFLOAT16, the data type supports FLOAT32 and DOUBLE. When the data type of `x` is FLOAT16, the data type supports FLOAT16 and DOUBLE.	FLOAT32, FLOAT16, DOUBLE	-	-	-
  out (aclTensorList*)	Output	Represents the output tensor list of tensor x divided by the scalar value, corresponding to `y` in the formula.	Supports empty tensors. All tensors in this parameter have the same data type. The data type and data format are the same as those of the input `x`, and the shape size is greater than or equal to the shape size of the input `x`.	FLOAT32, FLOAT16, BFLOAT16	ND	0-8	×
  workspaceSize (uint64_t*)	Output	Returns the workspace size to be applied for on the Device side.	-	-	-	-	-
  executor (aclOpExecutor**)	Output	Returns the op executor, which contains the operator computation flow.	-	-	-	-	-

• Return Value

  aclnnStatus: return code. For details, see aclnn Return Code.

  The first-phase API performs input parameter validation and returns an error in the following scenarios:

  Return Code	Error Code	Description
  ACLNN_ERR_PARAM_NULLPTR	161001	The input x, scalar, and out are null pointers.
  ACLNN_ERR_PARAM_INVALID	161002
  		The data types of x, scalar, and out are not within the supported range.
  		The data types of x and out are inconsistent.
  		The shapes of x and out do not satisfy the constraints.
  		The data types of tensors in x or out are inconsistent.
  		The dimension of a tensor in x or out exceeds 8.

aclnnForeachDivScalarV2

• Parameters

  Parameter	Input/Output	Description
  workspace	Input	Address of the workspace memory applied for on the Device side.
  workspaceSize	Input	Size of the workspace applied for on the Device side, obtained through the first-phase API aclnnForeachDivScalarV2GetWorkspaceSize.
  executor	Input	Operator executor that contains the operator computation flow.
  stream	Input	Specifies the stream for task execution.

• Return Value

  aclnnStatus: return code. For details, see aclnn Return Code.

Constraints

• Deterministic computation:

  • aclnnForeachDivScalarV2 defaults to a deterministic implementation.

Example

The following provides example code for reference only. For details about compilation and running, see Compile and Run Samples.

#include <iostream>
#include <vector>
#include "acl/acl.h"
#include "aclnnop/aclnn_foreach_div_scalar_v2.h"

#define CHECK_RET(cond, return_expr) \
  do {                               \
    if (!(cond)) {                   \
      return_expr;                   \
    }                                \
  } while (0)

#define LOG_PRINT(message, ...)     \
  do {                              \
    printf(message, ##__VA_ARGS__); \
  } while (0)

int64_t GetShapeSize(const std::vector<int64_t>& shape) {
  int64_t shapeSize = 1;
  for (auto i : shape) {
    shapeSize *= i;
  }
  return shapeSize;
}

int Init(int32_t deviceId, aclrtStream* stream) {
  // Boilerplate for resource initialization.
  auto ret = aclInit(nullptr);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclInit failed. ERROR: %d\n", ret); return ret);
  ret = aclrtSetDevice(deviceId);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtSetDevice failed. ERROR: %d\n", ret); return ret);
  ret = aclrtCreateStream(stream);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtCreateStream failed. ERROR: %d\n", ret); return ret);
  return 0;
}

template <typename T>
int CreateAclTensor(const std::vector<T>& hostData, const std::vector<int64_t>& shape, void** deviceAddr,
                    aclDataType dataType, aclTensor** tensor) {
  auto size = GetShapeSize(shape) * sizeof(T);
  // Call aclrtMalloc to apply for device memory.
  auto ret = aclrtMalloc(deviceAddr, size, ACL_MEM_MALLOC_HUGE_FIRST);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtMalloc failed. ERROR: %d\n", ret); return ret);
  // Copy host-side data to device-side memory using aclrtMemcpy.
  ret = aclrtMemcpy(*deviceAddr, size, hostData.data(), size, ACL_MEMCPY_HOST_TO_DEVICE);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtMemcpy failed. ERROR: %d\n", ret); return ret);

  // Calculate the strides of a contiguous tensor.
  std::vector<int64_t> strides(shape.size(), 1);
  for (int64_t i = shape.size() - 2; i >= 0; i--) {
    strides[i] = shape[i + 1] * strides[i + 1];
  }

  // Create an aclTensor by calling the aclCreateTensor API.
  *tensor = aclCreateTensor(shape.data(), shape.size(), dataType, strides.data(), 0, aclFormat::ACL_FORMAT_ND,
                            shape.data(), shape.size(), *deviceAddr);
  return 0;
}

int main() {
  // 1. (Boilerplate) Initialize the device/stream. See the ACL API manual.
  // Fill in the deviceId based on your actual device.
  int32_t deviceId = 0;
  aclrtStream stream;
  auto ret = Init(deviceId, &stream);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("Init acl failed. ERROR: %d\n", ret); return ret);

  // 2. Construct the inputs and outputs. Customize the construction based on the API.
  std::vector<int64_t> selfShape1 = {2, 3};
  std::vector<int64_t> selfShape2 = {1, 3};
  std::vector<int64_t> outShape1 = {2, 3};
  std::vector<int64_t> outShape2 = {1, 3};
  void* input1DeviceAddr = nullptr;
  void* input2DeviceAddr = nullptr;
  void* out1DeviceAddr = nullptr;
  void* out2DeviceAddr = nullptr;
  aclTensor* input1 = nullptr;
  aclTensor* input2 = nullptr;
  aclScalar* alpha = nullptr;
  aclTensor* out1 = nullptr;
  aclTensor* out2 = nullptr;
  std::vector<float> input1HostData = {1, 2, 3, 4, 5, 6};
  std::vector<float> input2HostData = {7, 8, 9};
  std::vector<float> out1HostData(6, 0);
  std::vector<float> out2HostData(3, 0);
  float alphaValue = 1.2f;
  // Create input1 aclTensor.
  ret = CreateAclTensor(input1HostData, selfShape1, &input1DeviceAddr, aclDataType::ACL_FLOAT, &input1);
  CHECK_RET(ret == ACL_SUCCESS, return ret);
  // Create input2 aclTensor.
  ret = CreateAclTensor(input2HostData, selfShape2, &input2DeviceAddr, aclDataType::ACL_FLOAT, &input2);
  CHECK_RET(ret == ACL_SUCCESS, return ret);
  // Create alpha aclScalar.
  alpha = aclCreateScalar(&alphaValue, aclDataType::ACL_FLOAT);
  CHECK_RET(alpha != nullptr, return ret);
  // Create out1 aclTensor.
  ret = CreateAclTensor(out1HostData, outShape1, &out1DeviceAddr, aclDataType::ACL_FLOAT, &out1);
  CHECK_RET(ret == ACL_SUCCESS, return ret);
  // Create out2 aclTensor.
  ret = CreateAclTensor(out2HostData, outShape2, &out2DeviceAddr, aclDataType::ACL_FLOAT, &out2);
  CHECK_RET(ret == ACL_SUCCESS, return ret);
  std::vector<aclTensor*> tempInput{input1, input2};
  aclTensorList* tensorListInput = aclCreateTensorList(tempInput.data(), tempInput.size());
  std::vector<aclTensor*> tempOutput{out1, out2};
  aclTensorList* tensorListOutput = aclCreateTensorList(tempOutput.data(), tempOutput.size());

  // 3. Call the CANN operator library API. Replace with the specific API name.
  uint64_t workspaceSize = 0;
  aclOpExecutor* executor;
  // Call the first-phase API of aclnnForeachDivScalarV2.
  ret = aclnnForeachDivScalarV2GetWorkspaceSize(tensorListInput, alpha, tensorListOutput, &workspaceSize, &executor);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclnnForeachDivScalarV2GetWorkspaceSize failed. ERROR: %d\n", ret); return ret);
  // Apply for device memory based on the workspaceSize calculated by the first-phase API.
  void* workspaceAddr = nullptr;
  if (workspaceSize > 0) {
    ret = aclrtMalloc(&workspaceAddr, workspaceSize, ACL_MEM_MALLOC_HUGE_FIRST);
    CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("allocate workspace failed. ERROR: %d\n", ret); return ret);
  }
  // Call the second-phase API of aclnnForeachDivScalarV2.
  ret = aclnnForeachDivScalarV2(workspaceAddr, workspaceSize, executor, stream);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclnnForeachDivScalarV2 failed. ERROR: %d\n", ret); return ret);

  // 4. (Boilerplate) Synchronously wait for task execution to complete.
  ret = aclrtSynchronizeStream(stream);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtSynchronizeStream failed. ERROR: %d\n", ret); return ret);

  // 5. Obtain the output value and copy the result from the device memory to the host memory. Modify this based on the specific API definition.
  auto size = GetShapeSize(outShape1);
  std::vector<float> out1Data(size, 0);
  ret = aclrtMemcpy(out1Data.data(), out1Data.size() * sizeof(out1Data[0]), out1DeviceAddr,
                    size * sizeof(out1Data[0]), ACL_MEMCPY_DEVICE_TO_HOST);
  for (int64_t i = 0; i < size; i++) {
    LOG_PRINT("out1 result[%ld] is: %f\n", i, out1Data[i]);
  }

  size = GetShapeSize(outShape2);
  std::vector<float> out2Data(size, 0);
  ret = aclrtMemcpy(out2Data.data(), out2Data.size() * sizeof(out2Data[0]), out2DeviceAddr,
                    size * sizeof(out2Data[0]), ACL_MEMCPY_DEVICE_TO_HOST);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("copy result from device to host failed. ERROR: %d\n", ret); return ret);
  for (int64_t i = 0; i < size; i++) {
    LOG_PRINT("out2 result[%ld] is: %f\n", i, out2Data[i]);
  }

  // 6. Release aclTensor and aclScalar. Modify this based on the specific API definition.
  aclDestroyTensorList(tensorListInput);
  aclDestroyTensorList(tensorListOutput);
  aclDestroyScalar(alpha);

  // 7. Release device resources. Modify this based on the specific API definition.
  aclrtFree(input1DeviceAddr);
  aclrtFree(input2DeviceAddr);
  aclrtFree(out1DeviceAddr);
  aclrtFree(out2DeviceAddr);
  if (workspaceSize > 0) {
    aclrtFree(workspaceAddr);
  }
  aclrtDestroyStream(stream);
  aclrtResetDevice(deviceId);
  aclFinalize();
  return 0;
}