aclnnForeachDivScalar

📄 View Source Code

Applicable Products

Function

• Description: Divides each tensor in the tensor list x by the tensor scalar.

• Formula:

  $$x = [{x_0}, {x_1}, ... {x_{n-1}}]\\ y = [{y_0}, {y_1}, ... {y_{n-1}}]\\$$ $${\rm y}_i = \frac{x_i}{{\rm scalar}} (i=0,1,...n-1)$$

Function Prototype

Each operator is divided into a two-phase API. You must first call the "aclnnForeachDivScalarGetWorkspaceSize" API to obtain the input parameters and calculate the required workspace size based on the computation process, and then call the "aclnnForeachDivScalar" API to perform the computation.

aclnnStatus aclnnForeachDivScalarGetWorkspaceSize(
  const aclTensorList *x,
  const aclTensor     *scalar,
  const aclTensorList *out,
  uint64_t            *workspaceSize,
  aclOpExecutor      **executor)

aclnnStatus aclnnForeachDivScalar(
  void          *workspace,
  uint64_t       workspaceSize,
  aclOpExecutor *executor,
  aclrtStream    stream)

aclnnForeachDivScalarGetWorkspaceSize

• Parameters

  Parameter	Input/Output	Description	Instruction	Data Type	Data Format	Shape	Non-contiguous Tensor
  x (aclTensorList*)	Input	Represents the first input tensor list for the division operation, corresponding to `x` in the formula.	Supports empty tensors. All tensors in this parameter must have the same data type.	BFLOAT16, FLOAT16, FLOAT32	ND	0-8	√
  scalar (aclTensor*)	Input	Represents the second input tensor of the division operation, corresponding to `scalar` in the formula.	Empty tensors are not supported. The number of elements is 1. The data type has a specific correspondence with the data type of the input `x`: When the data type of `x` is FLOAT32 or FLOAT16, the data type must be consistent with that of `x`. When the data type of `x` is BFLOAT16, the data type supports FLOAT32.	FLOAT16, FLOAT32	ND	0-8	√
  out (aclTensorList*)	Output	Output tensor list of tensor x divided by tensor scalar, corresponding to `y` in the formula.	Supports empty tensors. All tensors in this parameter have the same data type. The data type and data format are consistent with those of input `x`, and the shape size is greater than or equal to that of input `x`.	BFLOAT16, FLOAT16, FLOAT32	ND	0-8	√
  workspaceSize (uint64_t*)	Output	Returns the workspace size to be applied for on the Device.	-	-	-	-	-
  executor (aclOpExecutor**)	Output	Returns the op executor, which contains the operator computation process.	-	-	-	-	-

• Return Value

  aclnnStatus: return code. For details, see aclnn Return Code.

  The first-phase API performs input parameter validation and returns an error in the following scenarios:

  Return Code	Error Code	Description
  ACLNN_ERR_PARAM_NULLPTR	161001	The input x, scalar, or out is a null pointer.
  ACLNN_ERR_PARAM_INVALID	161002	The data types of x, scalar, and out are not within the supported range.
  		The data types of x and out are inconsistent.
  ACLNN_ERR_INNER_TILING_ERROR	561002	The shapes of x and out do not satisfy the constraints.
  		A tensor in x or out has more than eight dimensions.
  		The data types of tensors in x or out are inconsistent.
  		The number of elements in scalar is not 1.

aclnnForeachDivScalar

• Parameters

  Parameter	Input/Output	Description
  workspace	Input	Workspace memory address applied for on the Device side.
  workspaceSize	Input	Workspace size applied for on the Device side, obtained from the first-phase API aclnnForeachDivScalarGetWorkspaceSize.
  executor	Input	Specifies the operator executor, which contains the operator computation flow.
  stream	Input	Specifies the stream for task execution.

• Return Value

  aclnnStatus: return code. For details, see aclnn Return Code.

Constraints

• Deterministic computation:
  • aclnnForeachDivScalar defaults to a deterministic implementation.

Example

The following provides example code for reference only. For details about compilation and running, see Compile and Run Samples.

#include <iostream>
#include <vector>
#include "acl/acl.h"
#include "aclnnop/aclnn_foreach_div_scalar.h"

#define CHECK_RET(cond, return_expr) \
  do {                               \
    if (!(cond)) {                   \
      return_expr;                   \
    }                                \
  } while (0)

#define LOG_PRINT(message, ...)     \
  do {                              \
    printf(message, ##__VA_ARGS__); \
  } while (0)

int64_t GetShapeSize(const std::vector<int64_t>& shape) {
  int64_t shapeSize = 1;
  for (auto i : shape) {
    shapeSize *= i;
  }
  return shapeSize;
}

int Init(int32_t deviceId, aclrtStream* stream) {
  // Boilerplate: resource initialization.
  auto ret = aclInit(nullptr);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclInit failed. ERROR: %d\n", ret); return ret);
  ret = aclrtSetDevice(deviceId);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtSetDevice failed. ERROR: %d\n", ret); return ret);
  ret = aclrtCreateStream(stream);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtCreateStream failed. ERROR: %d\n", ret); return ret);
  return 0;
}

template <typename T>
int CreateAclTensor(const std::vector<T>& hostData, const std::vector<int64_t>& shape, void** deviceAddr,
                    aclDataType dataType, aclTensor** tensor) {
  auto size = GetShapeSize(shape) * sizeof(T);
  // Call aclrtMalloc to apply for device-side memory.
  auto ret = aclrtMalloc(deviceAddr, size, ACL_MEM_MALLOC_HUGE_FIRST);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtMalloc failed. ERROR: %d\n", ret); return ret);
  // Copy host-side data to the device memory.
  ret = aclrtMemcpy(*deviceAddr, size, hostData.data(), size, ACL_MEMCPY_HOST_TO_DEVICE);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtMemcpy failed. ERROR: %d\n", ret); return ret);

  // Calculate the strides of a contiguous tensor.
  std::vector<int64_t> strides(shape.size(), 1);
  for (int64_t i = shape.size() - 2; i >= 0; i--) {
    strides[i] = shape[i + 1] * strides[i + 1];
  }

  // Call aclCreateTensor to create an aclTensor.
  *tensor = aclCreateTensor(shape.data(), shape.size(), dataType, strides.data(), 0, aclFormat::ACL_FORMAT_ND,
                            shape.data(), shape.size(), *deviceAddr);
  return 0;
}

int main() {
  // 1. (Boilerplate) Initialize the device/stream. See the ACL API manual.
  // Set deviceId based on your actual device.
  int32_t deviceId = 0;
  aclrtStream stream;
  auto ret = Init(deviceId, &stream);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("Init acl failed. ERROR: %d\n", ret); return ret);

  // 2. Construct inputs and outputs. Customize the construction based on the API.
  std::vector<int64_t> selfShape1 = {2, 3};
  std::vector<int64_t> selfShape2 = {1, 3};
  std::vector<int64_t> outShape1 = {2, 3};
  std::vector<int64_t> outShape2 = {1, 3};
  std::vector<int64_t> alphaShape = {1};
  void* input1DeviceAddr = nullptr;
  void* input2DeviceAddr = nullptr;
  void* out1DeviceAddr = nullptr;
  void* out2DeviceAddr = nullptr;
  void* alphaDeviceAddr = nullptr;
  aclTensor* input1 = nullptr;
  aclTensor* input2 = nullptr;
  aclTensor* alpha = nullptr;
  aclTensor* out1 = nullptr;
  aclTensor* out2 = nullptr;
  std::vector<float> input1HostData = {1, 2, 3, 4, 5, 6};
  std::vector<float> input2HostData = {7, 8, 9};
  std::vector<float> out1HostData(6, 0);
  std::vector<float> out2HostData(3, 0);
  std::vector<float> alphaValueHostData = {1.2f};
  float alphaValue = 1.2f;
  // Create input1 aclTensor.
  ret = CreateAclTensor(input1HostData, selfShape1, &input1DeviceAddr, aclDataType::ACL_FLOAT, &input1);
  CHECK_RET(ret == ACL_SUCCESS, return ret);
  // Create input2 aclTensor.
  ret = CreateAclTensor(input2HostData, selfShape2, &input2DeviceAddr, aclDataType::ACL_FLOAT, &input2);
  CHECK_RET(ret == ACL_SUCCESS, return ret);
  // Create alpha aclTensor.
  ret = CreateAclTensor(alphaValueHostData, alphaShape, &alphaDeviceAddr, aclDataType::ACL_FLOAT, &alpha);
  CHECK_RET(ret == ACL_SUCCESS, return ret);
  // Create out1 aclTensor.
  ret = CreateAclTensor(out1HostData, outShape1, &out1DeviceAddr, aclDataType::ACL_FLOAT, &out1);
  CHECK_RET(ret == ACL_SUCCESS, return ret);
  // Create out2 aclTensor.
  ret = CreateAclTensor(out2HostData, outShape2, &out2DeviceAddr, aclDataType::ACL_FLOAT, &out2);
  CHECK_RET(ret == ACL_SUCCESS, return ret);
  std::vector<aclTensor*> tempInput{input1, input2};
  aclTensorList* tensorListInput = aclCreateTensorList(tempInput.data(), tempInput.size());
  std::vector<aclTensor*> tempOutput{out1, out2};
  aclTensorList* tensorListOutput = aclCreateTensorList(tempOutput.data(), tempOutput.size());

  // 3. Call the CANN operator library API. Replace with the specific API name.
  uint64_t workspaceSize = 0;
  aclOpExecutor* executor;
  // Call the first-phase API of aclnnForeachDivScalar.
  ret = aclnnForeachDivScalarGetWorkspaceSize(tensorListInput, alpha, tensorListOutput, &workspaceSize, &executor);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclnnForeachDivScalarGetWorkspaceSize failed. ERROR: %d\n", ret); return ret);
  // Apply for device memory based on the workspaceSize calculated by the first-phase API.
  void* workspaceAddr = nullptr;
  if (workspaceSize > 0) {
    ret = aclrtMalloc(&workspaceAddr, workspaceSize, ACL_MEM_MALLOC_HUGE_FIRST);
    CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("allocate workspace failed. ERROR: %d\n", ret); return ret);
  }
  // Call the second-phase API of aclnnForeachDivScalar.
  ret = aclnnForeachDivScalar(workspaceAddr, workspaceSize, executor, stream);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclnnForeachDivScalar failed. ERROR: %d\n", ret); return ret);

  // 4. (Boilerplate) Synchronously wait for task execution to finish.
  ret = aclrtSynchronizeStream(stream);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtSynchronizeStream failed. ERROR: %d\n", ret); return ret);

  // 5. Obtain the output value and copy the result from the device memory to the host memory. Modify based on the specific API definition.
  auto size = GetShapeSize(outShape1);
  std::vector<float> out1Data(size, 0);
  ret = aclrtMemcpy(out1Data.data(), out1Data.size() * sizeof(out1Data[0]), out1DeviceAddr,
                    size * sizeof(out1Data[0]), ACL_MEMCPY_DEVICE_TO_HOST);
  for (int64_t i = 0; i < size; i++) {
    LOG_PRINT("out1 result[%ld] is: %f\n", i, out1Data[i]);
  }

  size = GetShapeSize(outShape2);
  std::vector<float> out2Data(size, 0);
  ret = aclrtMemcpy(out2Data.data(), out2Data.size() * sizeof(out2Data[0]), out2DeviceAddr,
                    size * sizeof(out2Data[0]), ACL_MEMCPY_DEVICE_TO_HOST);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("copy result from device to host failed. ERROR: %d\n", ret); return ret);
  for (int64_t i = 0; i < size; i++) {
    LOG_PRINT("out2 result[%ld] is: %f\n", i, out2Data[i]);
  }

  // 6. Release aclTensor. Modify based on the specific API definition.
  aclDestroyTensorList(tensorListInput);
  aclDestroyTensorList(tensorListOutput);
  aclDestroyTensor(alpha);

  // 7. Release device resources. Modify based on the specific API definition.
  aclrtFree(input1DeviceAddr);
  aclrtFree(input2DeviceAddr);
  aclrtFree(out1DeviceAddr);
  aclrtFree(out2DeviceAddr);
  aclrtFree(alphaDeviceAddr);
  if (workspaceSize > 0) {
    aclrtFree(workspaceAddr);
  }
  aclrtDestroyStream(stream);
  aclrtResetDevice(deviceId);
  aclFinalize();
  return 0;
}