System Information

Scenarios

View the basic information and peripherals of the system.

Procedure

1. Choose Management > System Information.
   Figure 1 System information
   
2. Check system information.
   • View the basic information. Table 1 describes the parameters.

     Table 1 Basic information parameters

     Parameter	Description
     Hostname	Indicates the hostname of the management system. You can click Edit to modify it. The value is a string of 1 to 63 characters. Letters, digits, and hyphens (-) are allowed. The value cannot start or end with the hyphen (-).
     OS	Indicates the OS in use.
     Product Asset Label	Indicates the product asset label. You can click Edit to modify it. The value is a string of 1 to 255 characters. The value contains digits, letters, and punctuation marks.
     Product SN	Identifies a product.
     Firmware Version	Indicates the current firmware version.
     NPU Version	Indicates the current NPU version.
     Uptime	Indicates the running time of the current system.
     Model	Product model

   • View the information about peripherals. Table 2 describes the parameters.

     Table 2 Peripheral information parameters

     Parameter	Description
     Product SN	Identifies a product.
     Category	Indicates the category of a peripheral.
     Vendor	Indicates the vendor of a peripheral. NOTE: unknown indicates that the edge management system cannot identify the vendor name of the peripheral.
     Model	Indicates the model of a peripheral.
     Health Status	Indicates the health status of a peripheral. OK: normal Critical: abnormal
     Startup Status	Indicates the startup status of a peripheral. Enabled: started Disabled: stopped
     Device Location	Indicates the location of the bus where a peripheral is located.
     Firmware Version	Indicates the firmware version of a peripheral.