listen_ip_info

Applicability

Product	Supported (Yes/No)
Atlas 350 Accelerator Card	No
Atlas A3 training product/Atlas A3 inference product	Yes
Atlas A2 training product/Atlas A2 inference product	Yes
Atlas 200I/500 A2 inference product	No
Atlas inference product	No
Atlas training product	No

Note: For the Atlas A2 training product/Atlas A2 inference product, only the Atlas 800I A2 inference server and A200I A2 Box heterogeneous subrack are supported.

Function Description

Sets the cluster listening information on the PROMPT side, corresponding to the underlying llm.listenIpInfo configuration item.

Prototype

listen_ip_info(listen_ip_info)

Parameters

Parameter	Data Type	Description
listen_ip_info	str	IP address and port number of the device. You can configure one or more IP addresses and port numbers. If multiple IP addresses and port numbers are configured, separate them with semicolons (;). In the single-process single-device scenario, set this parameter to a single value, for example, "192.168.1.1:26000". In the single-process multi-device scenario, set this parameter to multiple values, for example, "192.168.1.1:26000;192.168.1.2:26000".

Parameter

Data Type

Description

listen_ip_info

str

IP address and port number of the device. You can configure one or more IP addresses and port numbers. If multiple IP addresses and port numbers are configured, separate them with semicolons (;).

In the single-process single-device scenario, set this parameter to a single value, for example, "192.168.1.1:26000".
In the single-process multi-device scenario, set this parameter to multiple values, for example, "192.168.1.1:26000;192.168.1.2:26000".

Example

from llm_datadist import LLMConfig
llm_config = LLMConfig()
# Single-process single-device configuration method
llm_config.listen_ip_info = "192.168.1.1:26000"
# Single-process multi-device configuration method
# llm_config.listen_ip_info = "192.168.1.1:26000;192.168.1.2:26000"

Returns

In normal cases, no value is returned.

If a parameter is incorrect, a TypeError or ValueError may be thrown.

Constraints

None

Parent topic: LLMConfig