listen_ip_info

Applicable Products

Product	Supported (Yes/No)
Ascend 950PR/Ascend 950DT	No
Atlas A3 training products/Atlas A3 inference products	Yes
Atlas A2 training products/Atlas A2 inference products	Yes
Atlas 200I/500 A2 inference products	No
Atlas inference products	No
Atlas training products	No

Note: For the Atlas A2 training products/Atlas A2 inference products, only the Atlas 800I A2 inference server and A200I A2 Box heterogeneous subrack are supported.

Function Description

Sets the cluster listening information on the PROMPT side, corresponding to the underlying llm.listenIpInfo configuration item.

Prototype

listen_ip_info(listen_ip_info)

Parameters

Parameter	Data Type	Value Description
listen_ip_info	str	IP address and port number on the device. You can configure one or more IP addresses and port numbers. If multiple IP addresses and port numbers are configured, separate them with semicolons (;). In the single-process single-device scenario, set this parameter to a single value, for example, "192.168.1.1:26000". In the single-process multi-device scenario, set this parameter to multiple values, for example, "192.168.1.1:26000;192.168.1.2:26000".

Parameter

Data Type

Value Description

listen_ip_info

str

IP address and port number on the device. You can configure one or more IP addresses and port numbers. If multiple IP addresses and port numbers are configured, separate them with semicolons (;).

In the single-process single-device scenario, set this parameter to a single value, for example, "192.168.1.1:26000".
In the single-process multi-device scenario, set this parameter to multiple values, for example, "192.168.1.1:26000;192.168.1.2:26000".

Example

from llm_datadist import LLMConfig
llm_config = LLMConfig()
# Single-process single-device configuration method
llm_config.listen_ip_info = "192.168.1.1:26000"
# Single-process multi-device configuration method
# llm_config.listen_ip_info = "192.168.1.1:26000;192.168.1.2:26000"

Returns

In normal cases, no value is returned.

If a parameter is incorrect, a TypeError or ValueError may be thrown.

Constraints

None

Parent topic: LLMConfig