aclnnLogSigmoid

📄 View Source Code

Applicable Products

Function

• Description: Performs the LogSigmoid operation on each element of the input tensor.

• Formula:

  $$out = LogSigmoid(x) = \log(\frac{1}{1+\exp(-x)})$$

Function Prototype

Each operator is divided into a two-phase API. The "aclnnLogSigmoidGetWorkspaceSize" API must be called first to obtain the workspace size required for computation and the executor that encapsulates the operator computation flow. Then, the "aclnnLogSigmoid" API is called to perform the computation.

aclnnStatus aclnnLogSigmoidGetWorkspaceSize(
  const aclTensor* self,
  aclTensor*       out,
  uint64_t*        workspaceSize,
  aclOpExecutor**  executor)

aclnnStatus aclnnLogSigmoid(
  void*            workspace,
  uint64_t         workspaceSize,
  aclOpExecutor*   executor,
  aclrtStream      stream)

aclnnLogSigmoidGetWorkspaceSize

• Parameters:

  Parameter	Input/Output	Description	Instruction	Data Type	Data Format	Dimension (shape)	Non-contiguous Tensor
  self (aclTensor*)	Input	The input for LogSigmoid computation, i.e., x in the formula.	Empty tensor is supported. self and out have the same shape. self and out have the same data type.	FLOAT, FLOAT16, BFLOAT16	ND	1-8	√
  out (aclTensor*)	Output	Output parameter of the computation.	The shapes of self and out are the same. The data types of self and out are the same.	FLOAT, FLOAT16, BFLOAT16	ND	1-8	√
  workspaceSize (uint64_t*)	Output	Returns the workspace size to be requested on the Device side.	-	-	-	-	-
  executor (aclOpExecutor**)	Output	Returns the operator executor, which contains the operator computation process.	-	-	-	-	-

  • Atlas training products: The data type supports FLOAT and FLOAT16.

• Return value

  aclnnStatus: return code. For details, see aclnn Return Code.

  The first-phase API performs input parameter validation and returns an error in the following scenarios:

  Return Code	Error Code	Description
  ACLNN_ERR_PARAM_NULLPTR	161001	The input self or out is a null pointer.
  ACLNN_ERR_PARAM_INVALID	161002	The data type of self or out is not within the supported range.
  		The data types of self and out are inconsistent.
  		The shapes of self and out are inconsistent.

aclnnLogSigmoid

• Parameters:

  Parameter	Input/Output	Description
  workspace	Input	Address of the workspace memory applied on the device side.
  workspaceSize	Input	Size of the workspace applied on the device side, obtained from the first-phase API aclnnLogSigmoidGetWorkspaceSize.
  executor	Input	Op executor that contains the operator computation flow.
  stream	Input	Specifies the stream for task execution.

• Return value

  aclnnStatus: return code. For details, see aclnn Return Code.

Constraints

• Deterministic computation:

  • aclnnLogSigmoid defaults to a deterministic implementation.

Example

The following provides example code for reference only. For details about compilation and running, see Compile and Run Samples.

#include <iostream>
#include <vector>
#include "acl/acl.h"
#include "aclnnop/aclnn_logsigmoid.h"

#define CHECK_RET(cond, return_expr) \
  do {                               \
    if (!(cond)) {                   \
      return_expr;                   \
    }                                \
  } while (0)

#define LOG_PRINT(message, ...)     \
  do {                              \
    printf(message, ##__VA_ARGS__); \
  } while (0)

int64_t GetShapeSize(const std::vector<int64_t>& shape) {
  int64_t shapeSize = 1;
  for (auto i : shape) {
    shapeSize *= i;
  }
  return shapeSize;
}

int Init(int32_t deviceId, aclrtStream* stream) {
  // Boilerplate: resource initialization.
  auto ret = aclInit(nullptr);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclInit failed. ERROR: %d\n", ret); return ret);
  ret = aclrtSetDevice(deviceId);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtSetDevice failed. ERROR: %d\n", ret); return ret);
  ret = aclrtCreateStream(stream);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtCreateStream failed. ERROR: %d\n", ret); return ret);
  return 0;
}

template <typename T>
int CreateAclTensor(const std::vector<T>& hostData, const std::vector<int64_t>& shape, void** deviceAddr,
                    aclDataType dataType, aclTensor** tensor) {
  auto size = GetShapeSize(shape) * sizeof(T);
  // Call aclrtMalloc to allocate device memory.
  auto ret = aclrtMalloc(deviceAddr, size, ACL_MEM_MALLOC_HUGE_FIRST);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtMalloc failed. ERROR: %d\n", ret); return ret);
  // Call aclrtMemcpy to copy data from the host side to the device memory.
  ret = aclrtMemcpy(*deviceAddr, size, hostData.data(), size, ACL_MEMCPY_HOST_TO_DEVICE);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtMemcpy failed. ERROR: %d\n", ret); return ret);

  // Calculate the strides of the contiguous tensor.
  std::vector<int64_t> strides(shape.size(), 1);
  for (int64_t i = shape.size() - 2; i >= 0; i--) {
    strides[i] = shape[i + 1] * strides[i + 1];
  }

  // Call the aclCreateTensor API to create an aclTensor.
  *tensor = aclCreateTensor(shape.data(), shape.size(), dataType, strides.data(), 0, aclFormat::ACL_FORMAT_ND,
                            shape.data(), shape.size(), *deviceAddr);
  return 0;
}

int main() {
  // 1. (Boilerplate) Initialize the device/stream. Refer to the ACL API manual.
  // Set deviceId based on the actual device.
  int32_t deviceId = 0;
  aclrtStream stream;
  auto ret = Init(deviceId, &stream);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("Init acl failed. ERROR: %d\n", ret); return ret);

  // 2. Construct the input and output. Custom construction is required based on the API.
  std::vector<int64_t> selfShape = {4, 2};
  std::vector<int64_t> outShape = {4, 2};
  void* selfDeviceAddr = nullptr;
  void* outDeviceAddr = nullptr;
  aclTensor* self = nullptr;
  aclTensor* out = nullptr;
  std::vector<float> selfHostData = {1, 2, 3, 4, 5, 6, 7, 8};
  std::vector<float> outHostData = {0, 0, 0, 0, 0, 0, 0, 0};
  // Create the self aclTensor.
  ret = CreateAclTensor(selfHostData, selfShape, &selfDeviceAddr, aclDataType::ACL_FLOAT, &self);
  CHECK_RET(ret == ACL_SUCCESS, return ret);
  // Create the out aclTensor.
  ret = CreateAclTensor(outHostData, outShape, &outDeviceAddr, aclDataType::ACL_FLOAT, &out);
  CHECK_RET(ret == ACL_SUCCESS, return ret);

  // 3. Call the CANN operator library API. Replace with the actual API name.
  uint64_t workspaceSize = 0;
  aclOpExecutor* executor;
  // Call the first-phase API of aclnnLogSigmoid.
  ret = aclnnLogSigmoidGetWorkspaceSize(self, out, &workspaceSize, &executor);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclnnLogSigmoidGetWorkspaceSize failed. ERROR: %d\n", ret); return ret);
  // Apply for device memory based on the workspaceSize calculated by the first-phase API.
  void* workspaceAddr = nullptr;
  if (workspaceSize > 0) {
    ret = aclrtMalloc(&workspaceAddr, workspaceSize, ACL_MEM_MALLOC_HUGE_FIRST);
    CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("allocate workspace failed. ERROR: %d\n", ret); return ret);
  }
  // Call the second-phase API of aclnnLogSigmoid.
  ret = aclnnLogSigmoid(workspaceAddr, workspaceSize, executor, stream);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclnnLogSigmoid failed. ERROR: %d\n", ret); return ret);

  // 4. (Boilerplate) Synchronize and wait for task execution to complete.
  ret = aclrtSynchronizeStream(stream);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtSynchronizeStream failed. ERROR: %d\n", ret); return ret);

  // 5. Obtain the output value and copy the result from the device memory to the host side. Modify based on the specific API definition.
  auto size = GetShapeSize(outShape);
  std::vector<float> resultData(size, 0);
  ret = aclrtMemcpy(resultData.data(), resultData.size() * sizeof(resultData[0]), outDeviceAddr,
                    size * sizeof(resultData[0]), ACL_MEMCPY_DEVICE_TO_HOST);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("copy result from device to host failed. ERROR: %d\n", ret); return ret);
  for (int64_t i = 0; i < size; i++) {
    LOG_PRINT("result[%ld] is: %f\n", i, resultData[i]);
  }

  // 6. Release aclTensor. Modify based on the specific API definition.
  aclDestroyTensor(self);
  aclDestroyTensor(out);

  // 7. Release device resources. Modify based on the specific API definition.
  aclrtFree(selfDeviceAddr);
  aclrtFree(outDeviceAddr);
  if (workspaceSize > 0) {
    aclrtFree(workspaceAddr);
  }
  aclrtDestroyStream(stream);
  aclrtResetDevice(deviceId);
  aclFinalize();
  return 0;
}