aclnnForeachTanh

📄 View Source Code

Applicable Products

Function

• Description: Applies the hyperbolic tangent function to each tensor in the input tensor list.

• Formula:

  $$x = [{x_0}, {x_1}, ... {x_{n-1}}]\\ y = [{y_0}, {y_1}, ... {y_{n-1}}]\\$$ $$y_i=\frac{e^{x_i}-e^{-x_i}}{e^{x_i}+e^{-x_i}} (i=0,1,...n-1)$$

Function Prototype

Each operator is divided into a two-phase API. You must first call the "aclnnForeachTanhGetWorkspaceSize" API to obtain the input parameters and calculate the required workspace size based on the computation process, and then call the "aclnnForeachTanh" API to perform the computation.

aclnnStatus aclnnForeachTanhGetWorkspaceSize(
  const aclTensorList        *x,
  const aclTensorList        *out,
  uint64_t                   *workspaceSize,
  aclOpExecutor             **executor)

aclnnStatus aclnnForeachTanh(
  void           *workspace,
  uint64_t        workspaceSize,
  aclOpExecutor  *executor,
  aclrtStream     stream)

aclnnForeachTanhGetWorkspaceSize

• Parameters

• Return Value

  aclnnStatus: return code. For details, see aclnn Return Code.

  The first-phase API performs input parameter validation and returns an error in the following scenarios:

  Return Code	Error Code	Description
  ACLNN_ERR_PARAM_NULLPTR	161001	The input x or out is a null pointer.
  ACLNN_ERR_PARAM_INVALID	161002	The data type of x or out is not within the supported range.
  		The data types of x and out are inconsistent.
  ACLNN_ERR_PARAM_INVALID	561002	The shapes of x and out do not satisfy the constraints.
  		The data types of tensors in x or out are inconsistent.
  		A tensor in x or out has more than 8 dimensions.

aclnnForeachTanh

• Parameters

  Parameter	Input/Output	Description
  workspace	Input	Specifies the workspace memory address applied for on the Device side.
  workspaceSize	Input	Specifies the workspace size applied for on the Device side, which is obtained through the first-phase API aclnnForeachTanhGetWorkspaceSize.
  executor	Input	Operator executor, which contains the operator computation process.
  stream	Input	Specifies the stream for task execution.

• Return Value

  aclnnStatus: return code. For details, see aclnn Return Code.

Constraints

• Deterministic computation:

  • aclnnForeachTanh defaults to a deterministic implementation.

Example

The following provides example code for reference only. For details about compilation and running, see Compile and Run Samples.

#include <iostream>
#include <vector>
#include "acl/acl.h"
#include "aclnnop/aclnn_foreach_tanh.h"

#define CHECK_RET(cond, return_expr) \
  do {                               \
    if (!(cond)) {                   \
      return_expr;                   \
    }                                \
  } while (0)

#define LOG_PRINT(message, ...)     \
  do {                              \
    printf(message, ##__VA_ARGS__); \
  } while (0)

int64_t GetShapeSize(const std::vector<int64_t>& shape) {
  int64_t shapeSize = 1;
  for (auto i : shape) {
    shapeSize *= i;
  }
  return shapeSize;
}

int Init(int32_t deviceId, aclrtStream *stream)
{
    // Boilerplate: resource initialization.
    auto ret = aclInit(nullptr);
    CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclInit failed. ERROR: %d\n", ret); return ret);
    ret = aclrtSetDevice(deviceId);
    CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtSetDevice failed. ERROR: %d\n", ret); return ret);
    ret = aclrtCreateStream(stream);
    CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtCreateStream failed. ERROR: %d\n", ret); return ret);
    return 0;
}

template <typename T>
int CreateAclTensor(const std::vector<T>& hostData, const std::vector<int64_t>& shape, void** deviceAddr,
                    aclDataType dataType, aclTensor** tensor) {
  auto size = GetShapeSize(shape) * sizeof(T);
  // Call aclrtMalloc to apply for device memory.
  auto ret = aclrtMalloc(deviceAddr, size, ACL_MEM_MALLOC_HUGE_FIRST);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtMalloc failed. ERROR: %d\n", ret); return ret);
  // Copy data from the host to the device memory.
  ret = aclrtMemcpy(*deviceAddr, size, hostData.data(), size, ACL_MEMCPY_HOST_TO_DEVICE);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtMemcpy failed. ERROR: %d\n", ret); return ret);

  // Compute strides for a contiguous tensor.
  std::vector<int64_t> strides(shape.size(), 1);
  for (int64_t i = shape.size() - 2; i >= 0; i--) {
    strides[i] = shape[i + 1] * strides[i + 1];
  }

  // Call aclCreateTensor to create an aclTensor.
  *tensor = aclCreateTensor(shape.data(), shape.size(), dataType, strides.data(), 0, aclFormat::ACL_FORMAT_ND,
                            shape.data(), shape.size(), *deviceAddr);
  return 0;
}

int main() {
  // 1. (Boilerplate) Initialize the device/stream. See the ACL API manual.
  // Enter the deviceId based on your actual device.
  int32_t deviceId = 0;
  aclrtStream stream;
  auto ret = Init(deviceId, &stream);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("Init acl failed. ERROR: %d\n", ret); return ret);

  // 2. Construct the input and output. Customize the construction based on the API.
  std::vector<int64_t> selfShape1 = {2, 3};
  std::vector<int64_t> selfShape2 = {1, 3};
  std::vector<int64_t> outShape1 = {2, 3};
  std::vector<int64_t> outShape2 = {1, 3};
  void* input1DeviceAddr = nullptr;
  void* input2DeviceAddr = nullptr;
  void* out1DeviceAddr = nullptr;
  void* out2DeviceAddr = nullptr;
  aclTensor* input1 = nullptr;
  aclTensor* input2 = nullptr;
  aclTensor* out1 = nullptr;
  aclTensor* out2 = nullptr;
  std::vector<float> input1HostData = {1, 2, 3, 4, 5, 6};
  std::vector<float> input2HostData = {7, 8, 9};
  std::vector<float> out1HostData(6, 0);
  std::vector<float> out2HostData(3, 0);

  // Create the input1 aclTensor.
  ret = CreateAclTensor(input1HostData, selfShape1, &input1DeviceAddr, aclDataType::ACL_FLOAT, &input1);
  CHECK_RET(ret == ACL_SUCCESS, return ret);

  // Create the input2 aclTensor.
  ret = CreateAclTensor(input2HostData, selfShape2, &input2DeviceAddr, aclDataType::ACL_FLOAT, &input2);
  CHECK_RET(ret == ACL_SUCCESS, return ret);

  // Create the out1 aclTensor.
  ret = CreateAclTensor(out1HostData, outShape1, &out1DeviceAddr, aclDataType::ACL_FLOAT, &out1);
  CHECK_RET(ret == ACL_SUCCESS, return ret);

  // Create the out2 aclTensor.
  ret = CreateAclTensor(out2HostData, outShape2, &out2DeviceAddr, aclDataType::ACL_FLOAT, &out2);
  CHECK_RET(ret == ACL_SUCCESS, return ret);

  std::vector<aclTensor*> tempInput{input1, input2};
  aclTensorList* tensorListInput = aclCreateTensorList(tempInput.data(), tempInput.size());
  std::vector<aclTensor*> tempOutput{out1, out2};
  aclTensorList* tensorListOutput = aclCreateTensorList(tempOutput.data(), tempOutput.size());

  // 3. Call the CANN operator library API. Replace it with the specific API name.
  uint64_t workspaceSize = 0;
  aclOpExecutor* executor;
  // Call the first-phase API of aclnnForeachTanh.
  ret = aclnnForeachTanhGetWorkspaceSize(tensorListInput, tensorListOutput, &workspaceSize, &executor);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclnnForeachTanhGetWorkspaceSize failed. ERROR: %d\n", ret); return ret);
  // Apply for device memory based on the workspaceSize calculated by the first-phase API.
  void* workspaceAddr = nullptr;
  if (workspaceSize > 0) {
    ret = aclrtMalloc(&workspaceAddr, workspaceSize, ACL_MEM_MALLOC_HUGE_FIRST);
    CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("allocate workspace failed. ERROR: %d\n", ret); return ret);
  }
  // Call the second-phase API of aclnnForeachTanh.
  ret = aclnnForeachTanh(workspaceAddr, workspaceSize, executor, stream);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclnnForeachTanh failed. ERROR: %d\n", ret); return ret);

  // 4. (Boilerplate) Synchronize and wait for task execution to complete.
  ret = aclrtSynchronizeStream(stream);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtSynchronizeStream failed. ERROR: %d\n", ret); return ret);

  // 5. Obtain the output value and copy the result from the device memory to the host. Modify based on the specific API definition.
  auto size = GetShapeSize(outShape1);
  std::vector<float> out1Data(size, 0);
  ret = aclrtMemcpy(out1Data.data(), out1Data.size() * sizeof(out1Data[0]), out1DeviceAddr,
                    size * sizeof(out1Data[0]), ACL_MEMCPY_DEVICE_TO_HOST);
  for (int64_t i = 0; i < size; i++) {
    LOG_PRINT("out1 result[%ld] is: %f\n", i, out1Data[i]);
  }

  size = GetShapeSize(outShape2);
  std::vector<float> out2Data(size, 0);
  ret = aclrtMemcpy(out2Data.data(), out2Data.size() * sizeof(out2Data[0]), out2DeviceAddr,
                    size * sizeof(out2Data[0]), ACL_MEMCPY_DEVICE_TO_HOST);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("copy result from device to host failed. ERROR: %d\n", ret); return ret);
  for (int64_t i = 0; i < size; i++) {
    LOG_PRINT("out2 result[%ld] is: %f\n", i, out2Data[i]);
  }

  // 6. Release aclTensor. Modify based on the specific API definition.
  aclDestroyTensorList(tensorListInput);
  aclDestroyTensorList(tensorListOutput);

  // 7. Release device resources. Modify based on the specific API definition.
  aclrtFree(input1DeviceAddr);
  aclrtFree(input2DeviceAddr);
  aclrtFree(out1DeviceAddr);
  aclrtFree(out2DeviceAddr);
  if (workspaceSize > 0) {
    aclrtFree(workspaceAddr);
  }
  aclrtDestroyStream(stream);
  aclrtResetDevice(deviceId);
  aclFinalize();
  return 0;
}