Documentation
Download
文档中心
aclnnMishBackward

aclnnForeachPowList

📄 View Source Code

Applicable Products

ProductSupported
Ascend 950PR/Ascend 950DT×
Atlas A3 training products/Atlas A3 inference products√
Atlas A2 training products/Atlas A2 inference products√
Atlas 200I/500 A2 inference products×
Atlas inference products×
Atlas training products×

Function

  • Description: Performs an x2 power operation on each tensor in the input tensor list.

  • Formula:

    x1=[x10,x11,...x1n−1]x2=[x20,x21,...x2n−1]y=[y0,y1,...yn−1]x1 = [{x1_0}, {x1_1}, ... {x1_{n-1}}]\\ x2 = [{x2_0}, {x2_1}, ... {x2_{n-1}}]\\ y = [{y_0}, {y_1}, ... {y_{n-1}}]\\ yi=x1ix2i(i=0,1,...n−1)y_i = x1_i^{x2_i} (i=0,1,...n-1)

Function Prototype

Each operator is divided into a two-phase API. You must first call the "aclnnForeachPowListGetWorkspaceSize" API to obtain the input parameters and calculate the required workspace size based on the process, and then call the "aclnnForeachPowList" API to perform the computation.

aclnnStatus aclnnForeachPowListGetWorkspaceSize(
  const aclTensorList *x1,
  const aclTensorList *x2,
  const aclTensorList *out,
  uint64_t            *workspaceSize,
  aclOpExecutor      **executor)
aclnnStatus aclnnForeachPowList(
  void          *workspace,
  uint64_t       workspaceSize,
  aclOpExecutor *executor,
  aclrtStream    stream)

aclnnForeachPowListGetWorkspaceSize

  • Parameters

    Parameter Input/Output Description Instruction Data Type Data Format Shape Non-contiguous Tensor
    x1 (aclTensorList*) Input Indicates the base tensor list for performing the x2 power operation, corresponding to `x1` in the formula.
    • Nullable.
    • All tensors in this parameter must have the same data type.
    • The shape must be consistent with the shape of the input parameter `x2`.
    		 FLOAT32, FLOAT16, INT32, BFLOAT16 ND 0-8 √
    x2 (aclTensorList*) Input Indicates the exponent tensor list for performing the x2 power operation, corresponding to `x2` in the formula.
    • Nullable.
    • All tensors in this parameter must maintain type consistency.
    • The data type, data format, and shape are consistent with those of the input `x1`.
    • The absolute value of the value must be less than or equal to (2^31-1).
    		 FLOAT32, FLOAT16, INT32, BFLOAT16 ND 0-8 √
    out (aclTensorList*) Output Indicates the output tensor list for performing the x2 power operation, corresponding to `y` in the formula.
    • Nullable.
    • All tensors in this parameter have the same data type.
    • The data type and data format are consistent with those of the input `x1`, and the shape size is greater than or equal to the shape size of the input `x1`.
    		 FLOAT32, FLOAT16, INT32, BFLOAT16 ND 0-8 √
    workspaceSize（uint64_t*） Output Returns the workspace size to be allocated on the device side. - - - - -
    executor (aclOpExecutor**) Output Returns the operator executor, which contains the operator computation process. - - - - -

  • Return Value

    aclnnStatus: return code. For details, see aclnn Return Code.

    The first-phase API performs input parameter validation and returns an error in the following scenarios:

    Return Code Error Code Description
    ACLNN_ERR_PARAM_NULLPTR 161001 x1, x2, or out passed in is a null pointer.
    ACLNN_ERR_PARAM_INVALID 161002 The data types of x1, x2, and out are not within the supported range.
    The data types of x1, x2, and out are inconsistent.
    ACLNN_ERR_INNER_TILING_ERROR 561002 The shapes of x1, x2, and out do not meet the constraints.
    The data types of tensors in x1, x2, or out are inconsistent.
    The dimensions of tensors in x1, x2, or out exceed 8.

aclnnForeachPowList

  • Parameters

    Parameter Input/Output Description
    workspace Input Device-side allocated workspace memory address.
    workspaceSize Input Device-side allocated workspace size, obtained from the first-phase API aclnnForeachPowListGetWorkspaceSize.
    executor Input Operator executor that contains the operator computation process.
    stream Input Specifies the stream for executing the task.

  • Return Value

    aclnnStatus: return code. For details, see aclnn Return Code.

Constraints

  • Deterministic computation:

    • aclnnForeachPowList defaults to a deterministic implementation.

Example

The following provides example code for reference only. For details about compilation and running, see Compile and Run Samples.

#include <iostream>
#include <vector>
#include "acl/acl.h"
#include "aclnnop/aclnn_foreach_pow_list.h"

#define CHECK_RET(cond, return_expr) \
  do {                               \
    if (!(cond)) {                   \
      return_expr;                   \
    }                                \
  } while (0)

#define LOG_PRINT(message, ...)     \
  do {                              \
    printf(message, ##__VA_ARGS__); \
  } while (0)

int64_t GetShapeSize(const std::vector<int64_t>& shape) {
  int64_t shapeSize = 1;
  for (auto i : shape) {
    shapeSize *= i;
  }
  return shapeSize;
}

int Init(int32_t deviceId, aclrtStream *stream)
{
    // Boilerplate for resource initialization.
    auto ret = aclInit(nullptr);
    CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclInit failed. ERROR: %d\n", ret); return ret);
    ret = aclrtSetDevice(deviceId);
    CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtSetDevice failed. ERROR: %d\n", ret); return ret);
    ret = aclrtCreateStream(stream);
    CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtCreateStream failed. ERROR: %d\n", ret); return ret);
    return 0;
}

template <typename T>
int CreateAclTensor(const std::vector<T>& hostData, const std::vector<int64_t>& shape, void** deviceAddr,
                    aclDataType dataType, aclTensor** tensor) {
  auto size = GetShapeSize(shape) * sizeof(T);
  // Call aclrtMalloc to apply for device-side memory.
  auto ret = aclrtMalloc(deviceAddr, size, ACL_MEM_MALLOC_HUGE_FIRST);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtMalloc failed. ERROR: %d\n", ret); return ret);
  // Call aclrtMemcpy to copy data from the host side to the device-side memory.
  ret = aclrtMemcpy(*deviceAddr, size, hostData.data(), size, ACL_MEMCPY_HOST_TO_DEVICE);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtMemcpy failed. ERROR: %d\n", ret); return ret);

  // Calculate the strides of a contiguous tensor.
  std::vector<int64_t> strides(shape.size(), 1);
  for (int64_t i = shape.size() - 2; i >= 0; i--) {
    strides[i] = shape[i + 1] * strides[i + 1];
  }

  // Call the aclCreateTensor API to create an aclTensor.
  *tensor = aclCreateTensor(shape.data(), shape.size(), dataType, strides.data(), 0, aclFormat::ACL_FORMAT_ND,
                            shape.data(), shape.size(), *deviceAddr);
  return 0;
}

int main() {
  // 1. (Boilerplate) Initialize the device/stream. See the ACL API manual.
  // Fill in the deviceId based on your actual device.
  int32_t deviceId = 0;
  aclrtStream stream;
  auto ret = Init(deviceId, &stream);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("Init acl failed. ERROR: %d\n", ret); return ret);

  // 2. Construct inputs and outputs. Customize the construction based on the API.
  std::vector<int64_t> selfShape1 = {2, 3};
  std::vector<int64_t> selfShape2 = {1, 3};
  std::vector<int64_t> otherShape1 = {2, 3};
  std::vector<int64_t> otherShape2 = {1, 3};
  std::vector<int64_t> outShape1 = {2, 3};
  std::vector<int64_t> outShape2 = {1, 3};
  void* input1DeviceAddr = nullptr;
  void* input2DeviceAddr = nullptr;
  void* other1DeviceAddr = nullptr;
  void* other2DeviceAddr = nullptr;
  void* out1DeviceAddr = nullptr;
  void* out2DeviceAddr = nullptr;
  aclTensor* input1 = nullptr;
  aclTensor* input2 = nullptr;
  aclTensor* other1 = nullptr;
  aclTensor* other2 = nullptr;
  aclTensor* out1 = nullptr;
  aclTensor* out2 = nullptr;
  std::vector<float> input1HostData = {1, 2, 3, 4, 5, 6};
  std::vector<float> input2HostData = {7, 8, 9};
  std::vector<float> other1HostData = {6, 5, 4, 3, 2, 1};
  std::vector<float> other2HostData = {9, 8, 7};
  std::vector<float> out1HostData(6, 0);
  std::vector<float> out2HostData(3, 0);
  // Create input1 aclTensor.
  ret = CreateAclTensor(input1HostData, selfShape1, &input1DeviceAddr, aclDataType::ACL_FLOAT, &input1);
  CHECK_RET(ret == ACL_SUCCESS, return ret);
  // Create input2 aclTensor.
  ret = CreateAclTensor(input2HostData, selfShape2, &input2DeviceAddr, aclDataType::ACL_FLOAT, &input2);
  CHECK_RET(ret == ACL_SUCCESS, return ret);
  // Create other1 aclTensor.
  ret = CreateAclTensor(other1HostData, otherShape1, &other1DeviceAddr, aclDataType::ACL_FLOAT, &other1);
  CHECK_RET(ret == ACL_SUCCESS, return ret);
  // Create other2 aclTensor.
  ret = CreateAclTensor(other2HostData, otherShape2, &other2DeviceAddr, aclDataType::ACL_FLOAT, &other2);
  CHECK_RET(ret == ACL_SUCCESS, return ret);
  // Create out1 aclTensor.
  ret = CreateAclTensor(out1HostData, outShape1, &out1DeviceAddr, aclDataType::ACL_FLOAT, &out1);
  CHECK_RET(ret == ACL_SUCCESS, return ret);
  // Create out2 aclTensor.
  ret = CreateAclTensor(out2HostData, outShape2, &out2DeviceAddr, aclDataType::ACL_FLOAT, &out2);
  CHECK_RET(ret == ACL_SUCCESS, return ret);

  std::vector<aclTensor*> tempInput1{input1, input2};
  aclTensorList* tensorListInput1 = aclCreateTensorList(tempInput1.data(), tempInput1.size());
  std::vector<aclTensor*> tempInput2{other1, other2};
  aclTensorList* tensorListInput2 = aclCreateTensorList(tempInput2.data(), tempInput2.size());
  std::vector<aclTensor*> tempOutput{out1, out2};
  aclTensorList* tensorListOutput = aclCreateTensorList(tempOutput.data(), tempOutput.size());

  // 3. Call the CANN operator library API. Replace with the specific API name.
  uint64_t workspaceSize = 0;
  aclOpExecutor* executor;
  // Call the first-phase API of aclnnForeachPowList.
  ret = aclnnForeachPowListGetWorkspaceSize(tensorListInput1, tensorListInput2, tensorListOutput, &workspaceSize, &executor);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclnnForeachPowListGetWorkspaceSize failed. ERROR: %d\n", ret); return ret);
  // Apply for device memory based on the workspaceSize calculated by the first-phase API.
  void* workspaceAddr = nullptr;
  if (workspaceSize > 0) {
    ret = aclrtMalloc(&workspaceAddr, workspaceSize, ACL_MEM_MALLOC_HUGE_FIRST);
    CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("allocate workspace failed. ERROR: %d\n", ret); return ret);
  }
  // Call the second-phase API of aclnnForeachPowList.
  ret = aclnnForeachPowList(workspaceAddr, workspaceSize, executor, stream);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclnnForeachPowList failed. ERROR: %d\n", ret); return ret);

  // 4. (Boilerplate) Synchronously wait for task execution to complete.
  ret = aclrtSynchronizeStream(stream);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtSynchronizeStream failed. ERROR: %d\n", ret); return ret);

  // 5. Obtain the output value and copy the result from device-side memory to the host side. Modify based on the specific API definition.
  auto size = GetShapeSize(outShape1);
  std::vector<float> out1Data(size, 0);
  ret = aclrtMemcpy(out1Data.data(), out1Data.size() * sizeof(out1Data[0]), out1DeviceAddr,
                    size * sizeof(out1Data[0]), ACL_MEMCPY_DEVICE_TO_HOST);
  for (int64_t i = 0; i < size; i++) {
    LOG_PRINT("out1 result[%ld] is: %f\n", i, out1Data[i]);
  }

  size = GetShapeSize(outShape2);
  std::vector<float> out2Data(size, 0);
  ret = aclrtMemcpy(out2Data.data(), out2Data.size() * sizeof(out2Data[0]), out2DeviceAddr,
                    size * sizeof(out2Data[0]), ACL_MEMCPY_DEVICE_TO_HOST);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("copy result from device to host failed. ERROR: %d\n", ret); return ret);
  for (int64_t i = 0; i < size; i++) {
    LOG_PRINT("out2 result[%ld] is: %f\n", i, out2Data[i]);
  }

  // 6. Release aclTensor. Modify based on the specific API definition.
  aclDestroyTensorList(tensorListInput1);
  aclDestroyTensorList(tensorListInput2);
  aclDestroyTensorList(tensorListOutput);

  // 7. Release device resources. Modify based on the specific API definition.
  aclrtFree(input1DeviceAddr);
  aclrtFree(input2DeviceAddr);
  aclrtFree(other1DeviceAddr);
  aclrtFree(other2DeviceAddr);
  aclrtFree(out1DeviceAddr);
  aclrtFree(out2DeviceAddr);
  if (workspaceSize > 0) {
    aclrtFree(workspaceAddr);
  }
  aclrtDestroyStream(stream);
  aclrtResetDevice(deviceId);
  aclFinalize();
  return 0;
}
This site uses cookies to improve your browsing experience. By continuing to browse this site, you agree to our use of cookies.View Details