aclnnForeachMinimumScalar

📄 View Source Code

Applicable Products

Function

• Description: Performs element-wise comparison on the tensor list x and the tensor scalar, and computes the minimum value for each element.

• Formula:

  $$x = [{x_0}, {x_1}, ... {x_{n-1}}]\\ y = [{y_0}, {y_1}, ... {y_{n-1}}]\\$$ $${\rm y}_i = \min(x_i, \text{scalar}) (i=0,1,...n-1)$$

Function Prototype

Each operator uses a two-phase API. You must first call the "aclnnForeachMinimumScalarGetWorkspaceSize" API to obtain the input parameters and calculate the required workspace size based on the computation process, and then call the "aclnnForeachMinimumScalar" API to perform the computation.

aclnnStatus aclnnForeachMinimumScalarGetWorkspaceSize(
  const aclTensorList *x,
  const aclTensor     *scalar,
  const aclTensorList *out,
  uint64_t            *workspaceSize,
  aclOpExecutor      **executor)

aclnnStatus aclnnForeachMinimumScalar(
  void          *workspace,
  uint64_t       workspaceSize,
  aclOpExecutor *executor,
  aclrtStream    stream)

aclnnForeachMinimumScalarGetWorkspaceSize

• Parameters

  Parameter	Input/Output	Description	Instruction	Data Type	Data Format	Dimension (Shape)	Non-contiguous Tensor
  x (aclTensorList*)	Input	List of input tensors for the minimum operation, corresponding to `x` in the formula.	Empty tensors are supported. All tensors in this parameter must have the same data type.	FLOAT32, FLOAT16, INT32, BFLOAT16	ND	0-8	√
  scalar (aclTensor*)	Input	Represents the input tensor for the minimum operation, corresponding to `scalar` in the formula.	Empty tensors are not supported. The number of elements is 1. The data type has a certain correspondence with the data type of the input parameter `x`: When the data type of `x` is FLOAT32, FLOAT16, or INT32, the data type is consistent with that of `x`. When the data type of `x` is BFLOAT16, the data type supports FLOAT32.	FLOAT32, FLOAT16, INT32	ND	0-8	√
  out (aclTensorList*)	Output	Represents the output tensor list of the minimum operation, corresponding to `y` in the formula.	Supports empty tensors. All tensors in this parameter must have the same data type. The data type and data format are the same as those of the input parameter `x`, and the shape size is greater than or equal to the shape size of the input parameter `x`.	FLOAT32, FLOAT16, INT32, BFLOAT16	ND	0-8	√
  workspaceSize (uint64_t*)	Output	Returns the workspace size applied on the Device side.	-	-	-	-	-
  executor (aclOpExecutor**)	Output	Returns the op executor, which contains the operator computation flow.	-	-	-	-	-

• Return Value

  aclnnStatus: return code. For details, see aclnn Return Code.

  The first-phase API performs input parameter validation and returns an error in the following scenarios:

  Return Code	Error Code	Description
  ACLNN_ERR_PARAM_NULLPTR	161001	The passed x, scalar, or out is a null pointer.
  ACLNN_ERR_PARAM_INVALID	161002	The data types of x, scalar, and out are not within the supported range.
  		The data types of x and out are inconsistent.
  ACLNN_ERR_INNER_TILING_ERROR	561002	The shapes of x and out do not satisfy the constraints.
  		The data types of tensors in x or out are inconsistent.
  		The dimension of a tensor in x or out exceeds 8.
  		The number of elements in scalar is not 1.

aclnnForeachMinimumScalar

• Parameters

  Parameter	Input/Output	Description
  workspace	Input	Address of the workspace memory applied on the Device side.
  workspaceSize	Input	Size of the workspace applied on the Device side, obtained through the first-phase API aclnnForeachMinimumScalarGetWorkspaceSize.
  executor	Input	Operator executor that contains the operator computation flow.
  stream	Input	Specifies the stream that executes the task.

• Return Value

  aclnnStatus: return code. For details, see aclnn Return Code.

Constraints

• Deterministic computation:

  • aclnnForeachMinimumScalar defaults to a deterministic implementation.

Example

The following provides example code for reference only. For details about compilation and running, see Compile and Run Samples.

#include <iostream>
#include <vector>
#include "acl/acl.h"
#include "aclnnop/aclnn_foreach_minimum_scalar.h"

#define CHECK_RET(cond, return_expr) \
  do {                               \
    if (!(cond)) {                   \
      return_expr;                   \
    }                                \
  } while (0)

#define LOG_PRINT(message, ...)     \
  do {                              \
    printf(message, ##__VA_ARGS__); \
  } while (0)

int64_t GetShapeSize(const std::vector<int64_t>& shape) {
  int64_t shapeSize = 1;
  for (auto i : shape) {
    shapeSize *= i;
  }
  return shapeSize;
}

int Init(int32_t deviceId, aclrtStream* stream) {
  // Boilerplate. Resource initialization.
  auto ret = aclInit(nullptr);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclInit failed. ERROR: %d\n", ret); return ret);
  ret = aclrtSetDevice(deviceId);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtSetDevice failed. ERROR: %d\n", ret); return ret);
  ret = aclrtCreateStream(stream);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtCreateStream failed. ERROR: %d\n", ret); return ret);
  return 0;
}

template <typename T>
int CreateAclTensor(const std::vector<T>& hostData, const std::vector<int64_t>& shape, void** deviceAddr,
                    aclDataType dataType, aclTensor** tensor) {
  auto size = GetShapeSize(shape) * sizeof(T);
  // Call aclrtMalloc to apply for memory on the device side.
  auto ret = aclrtMalloc(deviceAddr, size, ACL_MEM_MALLOC_HUGE_FIRST);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtMalloc failed. ERROR: %d\n", ret); return ret);
  // Copy data from the host side to the device memory.
  ret = aclrtMemcpy(*deviceAddr, size, hostData.data(), size, ACL_MEMCPY_HOST_TO_DEVICE);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtMemcpy failed. ERROR: %d\n", ret); return ret);

  // Calculate the strides of the contiguous tensor.
  std::vector<int64_t> strides(shape.size(), 1);
  for (int64_t i = shape.size() - 2; i >= 0; i--) {
    strides[i] = shape[i + 1] * strides[i + 1];
  }

  // Call the aclCreateTensor API to create an aclTensor.
  *tensor = aclCreateTensor(shape.data(), shape.size(), dataType, strides.data(), 0, aclFormat::ACL_FORMAT_ND,
                            shape.data(), shape.size(), *deviceAddr);
  return 0;
}

int main() {
  // 1. (Boilerplate) Initialize the device/stream. Refer to the ACL API manual.
  // Set deviceId based on your actual device.
  int32_t deviceId = 0;
  aclrtStream stream;
  auto ret = Init(deviceId, &stream);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("Init acl failed. ERROR: %d\n", ret); return ret);

  // 2. Construct inputs and outputs. Customize the construction based on the API.
  std::vector<int64_t> selfShape1 = {2, 3};
  std::vector<int64_t> selfShape2 = {1, 3};
  std::vector<int64_t> outShape1 = {2, 3};
  std::vector<int64_t> outShape2 = {1, 3};
  std::vector<int64_t> alphaShape = {1};
  void* input1DeviceAddr = nullptr;
  void* input2DeviceAddr = nullptr;
  void* out1DeviceAddr = nullptr;
  void* out2DeviceAddr = nullptr;
  void* alphaDeviceAddr = nullptr;
  aclTensor* input1 = nullptr;
  aclTensor* input2 = nullptr;
  aclTensor* alpha = nullptr;
  aclTensor* out1 = nullptr;
  aclTensor* out2 = nullptr;
  std::vector<float> input1HostData = {1, 2, 3, 4, 5, 6};
  std::vector<float> input2HostData = {7, 8, 9};
  std::vector<float> out1HostData(6, 0);
  std::vector<float> out2HostData(3, 0);
  std::vector<float> alphaValueHostData = {1.2f};
  float alphaValue = 5.2f;
  // Create the input1 aclTensor.
  ret = CreateAclTensor(input1HostData, selfShape1, &input1DeviceAddr, aclDataType::ACL_FLOAT, &input1);
  CHECK_RET(ret == ACL_SUCCESS, return ret);
  // Create the input2 aclTensor.
  ret = CreateAclTensor(input2HostData, selfShape2, &input2DeviceAddr, aclDataType::ACL_FLOAT, &input2);
  CHECK_RET(ret == ACL_SUCCESS, return ret);
  // Create the alpha aclTensor.
  ret = CreateAclTensor(alphaValueHostData, alphaShape, &alphaDeviceAddr, aclDataType::ACL_FLOAT, &alpha);
  CHECK_RET(ret == ACL_SUCCESS, return ret);
  // Create the out1 aclTensor.
  ret = CreateAclTensor(out1HostData, outShape1, &out1DeviceAddr, aclDataType::ACL_FLOAT, &out1);
  CHECK_RET(ret == ACL_SUCCESS, return ret);
  // Create the out2 aclTensor.
  ret = CreateAclTensor(out2HostData, outShape2, &out2DeviceAddr, aclDataType::ACL_FLOAT, &out2);
  CHECK_RET(ret == ACL_SUCCESS, return ret);
  std::vector<aclTensor*> tempInput{input1, input2};
  aclTensorList* tensorListInput = aclCreateTensorList(tempInput.data(), tempInput.size());
  std::vector<aclTensor*> tempOutput{out1, out2};
  aclTensorList* tensorListOutput = aclCreateTensorList(tempOutput.data(), tempOutput.size());

  // 3. Call the CANN operator library API. Replace with the specific API name.
  uint64_t workspaceSize = 0;
  aclOpExecutor* executor;
  // Call the first-phase API of aclnnForeachMinimumScalar.
  ret = aclnnForeachMinimumScalarGetWorkspaceSize(tensorListInput, alpha, tensorListOutput, &workspaceSize, &executor);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclnnForeachMinimumScalarGetWorkspaceSize failed. ERROR: %d\n", ret); return ret);
  // Apply for device memory based on the workspaceSize calculated by the first-phase API.
  void* workspaceAddr = nullptr;
  if (workspaceSize > 0) {
    ret = aclrtMalloc(&workspaceAddr, workspaceSize, ACL_MEM_MALLOC_HUGE_FIRST);
    CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("allocate workspace failed. ERROR: %d\n", ret); return ret);
  }
  // Call the second-phase API of aclnnForeachMinimumScalar.
  ret = aclnnForeachMinimumScalar(workspaceAddr, workspaceSize, executor, stream);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclnnForeachMinimumScalar failed. ERROR: %d\n", ret); return ret);

  // 4. (Boilerplate) Synchronously wait for the task execution to finish.
  ret = aclrtSynchronizeStream(stream);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtSynchronizeStream failed. ERROR: %d\n", ret); return ret);

  // 5. Obtain the output value and copy the result from the device memory to the host side. Modify based on the specific API definition.
  auto size = GetShapeSize(outShape1);
  std::vector<float> out1Data(size, 0);
  ret = aclrtMemcpy(out1Data.data(), out1Data.size() * sizeof(out1Data[0]), out1DeviceAddr,
                    size * sizeof(out1Data[0]), ACL_MEMCPY_DEVICE_TO_HOST);
  for (int64_t i = 0; i < size; i++) {
    LOG_PRINT("out1 result[%ld] is: %f\n", i, out1Data[i]);
  }

  size = GetShapeSize(outShape2);
  std::vector<float> out2Data(size, 0);
  ret = aclrtMemcpy(out2Data.data(), out2Data.size() * sizeof(out2Data[0]), out2DeviceAddr,
                    size * sizeof(out2Data[0]), ACL_MEMCPY_DEVICE_TO_HOST);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("copy result from device to host failed. ERROR: %d\n", ret); return ret);
  for (int64_t i = 0; i < size; i++) {
    LOG_PRINT("out2 result[%ld] is: %f\n", i, out2Data[i]);
  }

  // 6. Release aclTensor. Modify based on the specific API definition.
  aclDestroyTensorList(tensorListInput);
  aclDestroyTensorList(tensorListOutput);
  aclDestroyTensor(alpha);

  // 7. Release device resources. Modify based on the specific API definition.
  aclrtFree(input1DeviceAddr);
  aclrtFree(input2DeviceAddr);
  aclrtFree(out1DeviceAddr);
  aclrtFree(out2DeviceAddr);
  aclrtFree(alphaDeviceAddr);
  if (workspaceSize > 0) {
    aclrtFree(workspaceAddr);
  }
  aclrtDestroyStream(stream);
  aclrtResetDevice(deviceId);
  aclFinalize();
  return 0;
}