Documentation
Download
文档中心
aclnnForeachMaximumList

aclnnForeachMaximumList

📄 View Source Code

Applicable Products

ProductSupported
Ascend 950PR/Ascend 950DT×
Atlas A3 training products/Atlas A3 inference products√
Atlas A2 training products/Atlas A2 inference products√
Atlas 200I/500 A2 inference products×
Atlas inference products×
Atlas training products×

Function

  • Description: Performs element-wise comparison on tensor list x1 and tensor list x2, and computes the maximum value for each element.

  • Formula:

    x1=[x10,x11,...x1n−1],x2=[x20,x21,...x2n−1]y=[y0,y1,...yn−1]x1 = [{x1_0}, {x1_1}, ... {x1_{n-1}}], x2 = [{x2_0}, {x2_1}, ... {x2_{n-1}}]\\ y = [{y_0}, {y_1}, ... {y_{n-1}}]\\ yi=max⁡(x1i,x2i)(i=0,1,...n−1){\rm y}_i = \max(x1_i, x2_i) (i=0,1,...n-1)

Function Prototype

Each operator is divided into a two-phase API. You must first call the "aclnnForeachMaximumListGetWorkspaceSize" API to obtain the input parameters and calculate the required workspace size based on the computation process, and then call the "aclnnForeachMaximumList" API to perform the computation.

aclnnStatus aclnnForeachMaximumListGetWorkspaceSize(
  const aclTensorList *x1,
  const aclTensorList *x2,
  const aclTensorList *out,
  uint64_t            *workspaceSize,
  aclOpExecutor      **executor)
aclnnStatus aclnnForeachMaximumList(
  void          *workspace,
  uint64_t       workspaceSize,
  aclOpExecutor *executor,
  aclrtStream    stream)

aclnnForeachMaximumListGetWorkspaceSize

  • Parameters

    Parameter Input/Output Description Instruction Data Type Data Format Shape Non-contiguous Tensor
    x1 (aclTensorList*) Input The first input tensor list for the maximum operation, corresponding to `x1` in the formula.
    • Empty tensors are supported.
    • All tensors in this parameter must have the same data type.
    • The shape must be consistent with the shape of the input parameter `x2`.
    		 FLOAT32, FLOAT16, INT32, BFLOAT16 ND 0-8 √
    x2 (aclTensorList*) Input The second input tensor list for the maximum operation, corresponding to `x2` in the formula.
    • Empty tensors are supported.
    • All tensors in this parameter must have the same data type.
    • The data type, data format, and shape are consistent with those of the input parameter `x1`.
    		 FLOAT32, FLOAT16, INT32, BFLOAT16 ND 0-8 √
    out (aclTensorList*) Output Output tensor list of the maximum operation, corresponding to `y` in the formula.
    • Supports empty tensors.
    • All tensors in this parameter must have the same data type.
    • The data type and data format are the same as those of the input `x1`, and the shape size is greater than or equal to that of the input `x1`.
    		 FLOAT32, FLOAT16, INT32, BFLOAT16 ND 0-8 √
    workspaceSize (uint64_t*) Output Returns the workspace size to be applied for on the Device side. - - - - -
    executor (aclOpExecutor**) Output Returns the op executor, which contains the operator computation flow. - - - - -

  • Return Value

    aclnnStatus: return code. For details, see aclnn Return Code.

    The first-phase API performs input parameter validation and returns an error in the following scenarios:

    Return Code Error Code Description
    ACLNN_ERR_PARAM_NULLPTR 161001 x1, x2, or out passed in is a null pointer.
    ACLNN_ERR_PARAM_INVALID 161002 The data types of x1, x2, and out are not within the supported range.
    The data types of x1, x2, and out are inconsistent.
    ACLNN_ERR_INNER_TILING_ERROR 561002 The shapes of x1, x2, and out do not meet the constraints.
    The data types of tensors in x1, x2, or out are inconsistent.
    A tensor in x1, x2, or out has more than eight dimensions.

aclnnForeachMaximumList

  • Parameters

    Parameter Input/Output Description
    workspace Input Address of the workspace memory applied for on the Device side.
    workspaceSize Input Size of the workspace applied for on the Device side, obtained through the first-phase API aclnnForeachMaximumListGetWorkspaceSize.
    executor Input Operator executor, which contains the operator computation flow.
    stream Input Specifies the stream for task execution.

  • Return Value

    aclnnStatus: return code. For details, see aclnn Return Code.

Constraints

  • Deterministic computation:

    • aclnnForeachMaximumList defaults to a deterministic implementation.

Example

The following provides example code for reference only. For details about compilation and running, see Compile and Run Samples.

#include <iostream>
#include <vector>
#include "acl/acl.h"
#include "aclnnop/aclnn_foreach_maximum_list.h"

#define CHECK_RET(cond, return_expr) \
  do {                               \
    if (!(cond)) {                   \
      return_expr;                   \
    }                                \
  } while (0)

#define LOG_PRINT(message, ...)     \
  do {                              \
    printf(message, ##__VA_ARGS__); \
  } while (0)

int64_t GetShapeSize(const std::vector<int64_t>& shape) {
  int64_t shapeSize = 1;
  for (auto i : shape) {
    shapeSize *= i;
  }
  return shapeSize;
}

int Init(int32_t deviceId, aclrtStream *stream)
{
    // Boilerplate: resource initialization.
    auto ret = aclInit(nullptr);
    CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclInit failed. ERROR: %d\n", ret); return ret);
    ret = aclrtSetDevice(deviceId);
    CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtSetDevice failed. ERROR: %d\n", ret); return ret);
    ret = aclrtCreateStream(stream);
    CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtCreateStream failed. ERROR: %d\n", ret); return ret);
    return 0;
}

template <typename T>
int CreateAclTensor(const std::vector<T>& hostData, const std::vector<int64_t>& shape, void** deviceAddr,
                    aclDataType dataType, aclTensor** tensor) {
  auto size = GetShapeSize(shape) * sizeof(T);
  // Call aclrtMalloc to apply for device memory.
  auto ret = aclrtMalloc(deviceAddr, size, ACL_MEM_MALLOC_HUGE_FIRST);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtMalloc failed. ERROR: %d\n", ret); return ret);
  // Copy data from the host to the device memory by calling aclrtMemcpy.
  ret = aclrtMemcpy(*deviceAddr, size, hostData.data(), size, ACL_MEMCPY_HOST_TO_DEVICE);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtMemcpy failed. ERROR: %d\n", ret); return ret);

  // Compute the strides of a contiguous tensor.
  std::vector<int64_t> strides(shape.size(), 1);
  for (int64_t i = shape.size() - 2; i >= 0; i--) {
    strides[i] = shape[i + 1] * strides[i + 1];
  }

  // Create an aclTensor by calling aclCreateTensor.
  *tensor = aclCreateTensor(shape.data(), shape.size(), dataType, strides.data(), 0, aclFormat::ACL_FORMAT_ND,
                            shape.data(), shape.size(), *deviceAddr);
  return 0;
}

int main() {
  // 1. (Boilerplate) Initialize the device/stream. See the ACL API manual.
  // Enter the deviceId based on your actual device.
  int32_t deviceId = 0;
  aclrtStream stream;
  auto ret = Init(deviceId, &stream);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("Init acl failed. ERROR: %d\n", ret); return ret);

  // 2. Construct the inputs and outputs. Customize the construction based on the API interface.
  std::vector<int64_t> selfShape1 = {2, 3};
  std::vector<int64_t> selfShape2 = {1, 3};
  std::vector<int64_t> otherShape1 = {2, 3};
  std::vector<int64_t> otherShape2 = {1, 3};
  std::vector<int64_t> outShape1 = {2, 3};
  std::vector<int64_t> outShape2 = {1, 3};
  void* input1DeviceAddr = nullptr;
  void* input2DeviceAddr = nullptr;
  void* other1DeviceAddr = nullptr;
  void* other2DeviceAddr = nullptr;
  void* out1DeviceAddr = nullptr;
  void* out2DeviceAddr = nullptr;
  aclTensor* input1 = nullptr;
  aclTensor* input2 = nullptr;
  aclTensor* other1 = nullptr;
  aclTensor* other2 = nullptr;
  aclTensor* out1 = nullptr;
  aclTensor* out2 = nullptr;
  std::vector<float> input1HostData = {1, 2, 3, 4, 5, 6};
  std::vector<float> input2HostData = {7, 8, 9};
  std::vector<float> other1HostData = {6, 5, 4, 3, 2, 1};
  std::vector<float> other2HostData = {9, 8, 7};
  std::vector<float> out1HostData(6, 0);
  std::vector<float> out2HostData(3, 0);
  // Create input1 aclTensor.
  ret = CreateAclTensor(input1HostData, selfShape1, &input1DeviceAddr, aclDataType::ACL_FLOAT, &input1);
  CHECK_RET(ret == ACL_SUCCESS, return ret);
  // Create input2 aclTensor.
  ret = CreateAclTensor(input2HostData, selfShape2, &input2DeviceAddr, aclDataType::ACL_FLOAT, &input2);
  CHECK_RET(ret == ACL_SUCCESS, return ret);
  // Create other1 aclTensor.
  ret = CreateAclTensor(other1HostData, otherShape1, &other1DeviceAddr, aclDataType::ACL_FLOAT, &other1);
  CHECK_RET(ret == ACL_SUCCESS, return ret);
  // Create other2 aclTensor.
  ret = CreateAclTensor(other2HostData, otherShape2, &other2DeviceAddr, aclDataType::ACL_FLOAT, &other2);
  CHECK_RET(ret == ACL_SUCCESS, return ret);
  // Create out1 aclTensor.
  ret = CreateAclTensor(out1HostData, outShape1, &out1DeviceAddr, aclDataType::ACL_FLOAT, &out1);
  CHECK_RET(ret == ACL_SUCCESS, return ret);
  // Create out2 aclTensor.
  ret = CreateAclTensor(out2HostData, outShape2, &out2DeviceAddr, aclDataType::ACL_FLOAT, &out2);
  CHECK_RET(ret == ACL_SUCCESS, return ret);

  std::vector<aclTensor*> tempInput1{input1, input2};
  aclTensorList* tensorListInput1 = aclCreateTensorList(tempInput1.data(), tempInput1.size());
  std::vector<aclTensor*> tempInput2{other1, other2};
  aclTensorList* tensorListInput2 = aclCreateTensorList(tempInput2.data(), tempInput2.size());
  std::vector<aclTensor*> tempOutput{out1, out2};
  aclTensorList* tensorListOutput = aclCreateTensorList(tempOutput.data(), tempOutput.size());

  // 3. Call the CANN operator library API. Replace with the actual API name.
  uint64_t workspaceSize = 0;
  aclOpExecutor* executor;
  // Call the first-phase API of aclnnForeachMaximumList.
  ret = aclnnForeachMaximumListGetWorkspaceSize(tensorListInput1, tensorListInput2, tensorListOutput, &workspaceSize, &executor);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclnnForeachMaximumListGetWorkspaceSize failed. ERROR: %d\n", ret); return ret);
  // Apply for device memory based on the workspaceSize calculated by the first-phase API.
  void* workspaceAddr = nullptr;
  if (workspaceSize > 0) {
    ret = aclrtMalloc(&workspaceAddr, workspaceSize, ACL_MEM_MALLOC_HUGE_FIRST);
    CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("allocate workspace failed. ERROR: %d\n", ret); return ret);
  }
  // Call the second-phase API of aclnnForeachMaximumList.
  ret = aclnnForeachMaximumList(workspaceAddr, workspaceSize, executor, stream);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclnnForeachMaximumList failed. ERROR: %d\n", ret); return ret);

  // 4. (Boilerplate) Synchronize and wait for task execution to complete.
  ret = aclrtSynchronizeStream(stream);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtSynchronizeStream failed. ERROR: %d\n", ret); return ret);

  // 5. Obtain the output value and copy the result from the device memory to the host memory. Modify based on the specific API definition.
  auto size = GetShapeSize(outShape1);
  std::vector<float> out1Data(size, 0);
  ret = aclrtMemcpy(out1Data.data(), out1Data.size() * sizeof(out1Data[0]), out1DeviceAddr,
                    size * sizeof(out1Data[0]), ACL_MEMCPY_DEVICE_TO_HOST);
  for (int64_t i = 0; i < size; i++) {
    LOG_PRINT("out1 result[%ld] is: %f\n", i, out1Data[i]);
  }

  size = GetShapeSize(outShape2);
  std::vector<float> out2Data(size, 0);
  ret = aclrtMemcpy(out2Data.data(), out2Data.size() * sizeof(out2Data[0]), out2DeviceAddr,
                    size * sizeof(out2Data[0]), ACL_MEMCPY_DEVICE_TO_HOST);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("copy result from device to host failed. ERROR: %d\n", ret); return ret);
  for (int64_t i = 0; i < size; i++) {
    LOG_PRINT("out2 result[%ld] is: %f\n", i, out2Data[i]);
  }

  // 6. Release aclTensor. Modify based on the specific API definition.
  aclDestroyTensorList(tensorListInput1);
  aclDestroyTensorList(tensorListInput2);
  aclDestroyTensorList(tensorListOutput);

  // 7. Release device resources. Modify based on the specific API definition.
  aclrtFree(input1DeviceAddr);
  aclrtFree(input2DeviceAddr);
  aclrtFree(other1DeviceAddr);
  aclrtFree(other2DeviceAddr);
  aclrtFree(out1DeviceAddr);
  aclrtFree(out2DeviceAddr);
  if (workspaceSize > 0) {
    aclrtFree(workspaceAddr);
  }
  aclrtDestroyStream(stream);
  aclrtResetDevice(deviceId);
  aclFinalize();
  return 0;
}
This site uses cookies to improve your browsing experience. By continuing to browse this site, you agree to our use of cookies.View Details