aclnnSquare

📄 View Source Code

Applicable Products

Function

• Operator function: Computes the square value for each element of the input tensor.

• Formula:

Function Prototype

Each operator is divided into a two-phase API. The "aclnnSquareGetWorkspaceSize" API must be called first to obtain the workspace size required for computation and the executor that encapsulates the operator computation flow. Then, the "aclnnSquare" API is called to perform the computation.

aclnnStatus aclnnSquareGetWorkspaceSize(
  const aclTensor *self,
  aclTensor       *out,
  uint64_t        *workspaceSize,
  aclOpExecutor  **executor)

aclnnStatus aclnnSquare(
  void             *workspace,
  uint64_t          workspaceSize,
  aclOpExecutor    *executor,
  const aclrtStream stream)

aclnnSquareGetWorkspaceSize

• Parameters:

  Parameter	Input/Output	Description	Instruction	Data Type	Data Format	Dimension (Shape)	Non-Contiguous Tensor
  self (aclTensor*)	Input	Input tensor.	-	FLOAT, FLOAT16, BFLOAT16, INT32, INT64	ND	-	√
  out (aclTensor*)	Output	Output tensor.	The shape and type must be consistent with self.	FLOAT, FLOAT16, BFLOAT16, INT32, INT64	ND	-	√
  workspaceSize (uint64_t*)	Output	Returns the workspace size to be allocated on the Device side.	-	-	-	-	-
  executor (aclOpExecutor**)	Output	Returns the operator executor, which contains the operator computation flow.	-	-	-	-	-

• Return value

  aclnnStatus: return code. For details, see aclnn Return Codes.

  The first-phase API performs input parameter validation and returns an error in the following scenarios:

  Return Value	Error Code	Description
  ACLNN_ERR_PARAM_NULLPTR	161001	The self or out passed in is a null pointer.
  ACLNN_ERR_PARAM_INVALID	161002	The data type or data format of self is not within the supported range.
  		The data type and shape of the input self and output out are inconsistent.

aclnnSquare

• Parameters:

  Parameter	Input/Output	Description
  workspace	Input	Workspace memory address applied for on the device side.
  workspaceSize	Input	Workspace size applied for on the device side, obtained through the first-phase API aclnnSquareGetWorkspaceSize.
  executor	Input	Operator executor, which contains the operator computation flow.
  stream	Input	Specifies the stream for task execution.

• Return value

  aclnnStatus: return code. For details, see aclnn Return Codes.

Constraints

• Deterministic computation:

  • aclnnSquare defaults to a deterministic implementation.

Example

The following provides example code for reference only. For details about compilation and running, see Compile and Run Samples.

#include <iostream>
#include <vector>
#include "acl/acl.h"
#include "aclnnop/aclnn_square.h"

#define CHECK_RET(cond, return_expr) \
  do {                               \
    if (!(cond)) {                   \
      return_expr;                   \
    }                                \
  } while (0)

#define LOG_PRINT(message, ...)     \
  do {                              \
    printf(message, ##__VA_ARGS__); \
  } while (0)

int64_t GetShapeSize(const std::vector<int64_t>& shape) {
  int64_t shapeSize = 1;
  for (auto i : shape) {
    shapeSize *= i;
  }
  return shapeSize;
}

int Init(int32_t deviceId, aclrtStream* stream) {
  // Boilerplate for resource initialization.
  auto ret = aclInit(nullptr);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclInit failed. ERROR: %d\n", ret); return ret);
  ret = aclrtSetDevice(deviceId);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtSetDevice failed. ERROR: %d\n", ret); return ret);
  ret = aclrtCreateStream(stream);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtCreateStream failed. ERROR: %d\n", ret); return ret);
  return 0;
}

template <typename T>
int CreateAclTensor(const std::vector<T>& hostData, const std::vector<int64_t>& shape, void** deviceAddr,
                    aclDataType dataType, aclTensor** tensor) {
  auto size = GetShapeSize(shape) * sizeof(T);
  // Call aclrtMalloc to allocate device memory.
  auto ret = aclrtMalloc(deviceAddr, size, ACL_MEM_MALLOC_HUGE_FIRST);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtMalloc failed. ERROR: %d\n", ret); return ret);
  // Call aclrtMemcpy to copy data from host memory to device memory.
  ret = aclrtMemcpy(*deviceAddr, size, hostData.data(), size, ACL_MEMCPY_HOST_TO_DEVICE);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtMemcpy failed. ERROR: %d\n", ret); return ret);

  // Compute the strides of a contiguous tensor.
  std::vector<int64_t> strides(shape.size(), 1);
  for (int64_t i = shape.size() - 2; i >= 0; i--) {
    strides[i] = shape[i + 1] * strides[i + 1];
  }

  // Call the aclCreateTensor API to create an aclTensor.
  *tensor = aclCreateTensor(shape.data(), shape.size(), dataType, strides.data(), 0, aclFormat::ACL_FORMAT_ND,
                            shape.data(), shape.size(), *deviceAddr);
  return 0;
}

int main() {
  // 1. (Boilerplate) Initialize the device/stream. See the acl API manual.
  // Fill in the deviceId based on your actual device.
  int32_t deviceId = 0;
  aclrtStream stream;
  auto ret = Init(deviceId, &stream);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("Init acl failed. ERROR: %d\n", ret); return ret);

  // 2. Construct the input and output. Custom construction is required based on the API interface.
  std::vector<int64_t> selfShape = {4, 2};
  std::vector<int64_t> outShape = {4, 2};
  void* selfDeviceAddr = nullptr;
  void* outDeviceAddr = nullptr;
  aclTensor* self = nullptr;
  aclTensor* out = nullptr;
  std::vector<float> selfHostData = {0, 1, 2, 3, 4, 5, 6, 7};
  std::vector<float> outHostData = {0, 1, 4, 9, 16, 25, 36, 49};
  // Create the self aclTensor.
  ret = CreateAclTensor(selfHostData, selfShape, &selfDeviceAddr, aclDataType::ACL_FLOAT, &self);
  CHECK_RET(ret == ACL_SUCCESS, return ret);
  // Create the out aclTensor.
  ret = CreateAclTensor(outHostData, outShape, &outDeviceAddr, aclDataType::ACL_FLOAT, &out);
  CHECK_RET(ret == ACL_SUCCESS, return ret);

  // 3. Call the CANN operator library API. Replace with the actual API name.
  uint64_t workspaceSize = 0;
  aclOpExecutor* executor;
  // Call the first-phase API of aclnnSquare.
  ret = aclnnSquareGetWorkspaceSize(self, out, &workspaceSize, &executor);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclnnSquareGetWorkspaceSize failed. ERROR: %d\n", ret); return ret);
  // Apply for device memory based on the workspaceSize calculated by the first-phase API.
  void* workspaceAddr = nullptr;
  if (workspaceSize > 0) {
    ret = aclrtMalloc(&workspaceAddr, workspaceSize, ACL_MEM_MALLOC_HUGE_FIRST);
    CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("allocate workspace failed. ERROR: %d\n", ret); return ret);
  }
  // Call the second-phase API of aclnnSquare.
  ret = aclnnSquare(workspaceAddr, workspaceSize, executor, stream);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclnnSquare failed. ERROR: %d\n", ret); return ret);

  // 4. (Boilerplate) Wait for the task execution to finish synchronously.
  ret = aclrtSynchronizeStream(stream);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtSynchronizeStream failed. ERROR: %d\n", ret); return ret);

  // 5. Obtain the output value and copy the result from the device memory to the host memory. Modify based on the specific API definition.
  auto size = GetShapeSize(outShape);
  std::vector<float> resultData(size, 0);
  ret = aclrtMemcpy(resultData.data(), resultData.size() * sizeof(resultData[0]), outDeviceAddr,
                    size * sizeof(resultData[0]), ACL_MEMCPY_DEVICE_TO_HOST);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("copy result from device to host failed. ERROR: %d\n", ret); return ret);
  for (int64_t i = 0; i < size; i++) {
    LOG_PRINT("result[%ld] is: %f\n", i, resultData[i]);
  }

  // 6. Release aclTensor and aclScalar. Modify based on the specific API definition.
  aclDestroyTensor(self);
  aclDestroyTensor(out);

  // 7. Release device resources.
  aclrtFree(selfDeviceAddr);
  aclrtFree(outDeviceAddr);
  if (workspaceSize > 0) {
    aclrtFree(workspaceAddr);
  }
  aclrtDestroyStream(stream);
  aclrtResetDevice(deviceId);
  aclFinalize();

  return 0;
}