SimpleSoftMax

Function Usage

If the product of non-last axis lengths of the input tensor [m₀, m₁, ..., m_t, n] (t ≥ 0) is considered as m, the shape of the input tensor is [m, n]. Perform the following computation on the input tensor [m, n] by row. Unlike the SoftMax API, this API does not include the reduction process to compute the sum and max data. Instead, it uses the computed sum and max data to perform SoftMax computation on the input tensor. The formula is as follows.

For ease of understanding, the formula expressed through a Python script is as follows, where src, max, and sum are the source operands (input), and dst is the destination operand (output).

1
2
3

def simple_softmax(src, max, sum):
    dst = np.exp(src - max)/sum
return dst

Principles

The following figure shows the internal algorithm diagram of the SimpleSoftMax high-level APIs by taking the input tensor of the float type, in ND format, and with shape [m, k] as an example.

Figure 1 Diagram of the SimpleSoftMax algorithm

The computation process is divided into the following steps, all of which are performed on vectors:

1. sub: Subtract max from all data of input x by row.

2. exp: Calculate exp for all data after sub.

3. div: Divide all data generated after exp by sum at each row to obtain the final result.

Prototype

• Allocate the temporary space through the API framework.
  • The data types of LocalTensor are the same.

    1 2

    template <typename T, bool isReuseSource = false, bool isBasicBlock = false, bool isDataFormatNZ = false, const SoftmaxConfig& config = SOFTMAX_DEFAULT_CFG> __aicore__ inline void SimpleSoftMax(const LocalTensor<T>& dstTensor, const LocalTensor<T>& inSumTensor, const LocalTensor<T>& inMaxTensor, const LocalTensor<T>& srcTensor, const SoftMaxTiling& tiling, const SoftMaxShapeInfo& softmaxShapeInfo = {})

  • The data types of LocalTensor are different.

    1 2

    template <typename T, bool isReuseSource = false, bool isBasicBlock = false, bool isDataFormatNZ = false, const SoftmaxConfig& config = SOFTMAX_DEFAULT_CFG> __aicore__ inline void SimpleSoftMax(const LocalTensor<half>& dstTensor, const LocalTensor<float>& inSumTensor, const LocalTensor<float>& inMaxTensor, const LocalTensor<half>& srcTensor, const SoftMaxTiling& tiling, const SoftMaxShapeInfo& softmaxShapeInfo = {})

• Pass the temporary space through the sharedTmpBuffer input parameter.
  • The data types of LocalTensor are the same.

    1 2

    template <typename T, bool isReuseSource = false, bool isBasicBlock = false, bool isDataFormatNZ = false, const SoftmaxConfig& config = SOFTMAX_DEFAULT_CFG> __aicore__ inline void SimpleSoftMax(const LocalTensor<T>& dstTensor, const LocalTensor<T>& inSumTensor, const LocalTensor<T>& inMaxTensor, const LocalTensor<T>& srcTensor, const LocalTensor<uint8_t>& sharedTmpBuffer, const SoftMaxTiling& tiling, const SoftMaxShapeInfo& softmaxShapeInfo = {})

  • The data types of LocalTensor are different.

    1 2

    template <typename T, bool isReuseSource = false, bool isBasicBlock = false, bool isDataFormatNZ = false, const SoftmaxConfig& config = SOFTMAX_DEFAULT_CFG> __aicore__ inline void SimpleSoftMax(const LocalTensor<half>& dstTensor, const LocalTensor<float>& inSumTensor, const LocalTensor<float>& inMaxTensor, const LocalTensor<half>& srcTensor, const LocalTensor<uint8_t>& sharedTmpBuffer, const SoftMaxTiling& tiling, const SoftMaxShapeInfo& softmaxShapeInfo = {})

Due to the complex computation involved in the internal implementation of this API, additional temporary space is required to store intermediate variables generated during computation. The temporary space can be allocated through the API framework or passed by developers through the sharedTmpBuffer input parameter.

• When the API framework is used for temporary space allocation, developers do not need to allocate the space, but must reserve the required size for the space.

• When the sharedTmpBuffer input parameter is used for passing the temporary space, the tensor serves as the temporary space. In this case, the API framework is not required for temporary space allocation. This enables developers to manage the sharedTmpBuffer space and reuse the buffer after calling the API, so that the buffer is not repeatedly allocated and deallocated, improving the flexibility and buffer utilization.

If the API framework is used, developers must reserve the temporary space. If sharedTmpBuffer is used, developers must allocate space for the tensor. The method of obtaining the temporary space size (BufferSize) is as follows: Obtain the required maximum and minimum temporary space sizes using the GetSoftMaxMaxTmpSize/GetSoftMaxMinTmpSize API provided in SoftMax/SimpleSoftMax Tiling. The minimum space can ensure correct functionality, while the maximum space is used to improve performance.

Parameters

1
2
3
4
5

struct SoftmaxConfig{
bool isCheckTiling = true; // Whether to check the consistency between the shape and tiling. If they are inconsistent, the API re-computes the required tiling based on the shape. The default value is true, indicating that the API checks the consistency internally.
uint32_t oriSrcM = 0; // Product of the original non-last axis lengths. After this parameter is set, the shape is turned into a constant value, and the constant shape is used at compile time.
uint32_t oriSrcK = 0; // Original last axis length. After this parameter is set, the shape is turned into a constant value, and the constant shape is used at compile time.
};

1

constexpr SoftmaxConfig SOFTMAX_DEFAULT_CFG = {true, 0, 0};

1
2
3
4
5
6

struct SoftMaxShapeInfo {
uint32_t srcM; // Product of lengths of non-last axes.
uint32_t srcK; // Length of the last axis, which must be 32-byte aligned.
uint32_t oriSrcM; // Product of lengths of original non-last axes.
uint32_t oriSrcK; // Length of the original last axis.
};

Returns

None

Availability

Precautions

• The tensor space of srcTensor and dstTensor can be reused.
• inSumTensor and inMaxTensor are inputs, and the length of the last axis must be fixed at 32 bytes.
• The data types of inSumTensor and inMaxTensor must be the same.
• For details about the alignment requirements of the operand address offset, see General Restrictions.

Example

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88

#include "kernel_operator.h"

// constexpr AscendC::SoftmaxConfig static_config = {true, 320, 64}; Used for a constant shape
template <typename T>
class KernelSimpleSoftmax {
public:
    __aicore__ inline KernelSimpleSoftmax()
    {}
    __aicore__ inline void Init(__gm__ uint8_t *srcGm, __gm__ uint8_t *inMaxGm, __gm__ uint8_t *inSumGm,
        __gm__ uint8_t *dstGm, const SoftMaxTiling &tilingData)
    {
        elementNumPerBlk = 32 / sizeof(T);
        srcGlobal.SetGlobalBuffer((__gm__ T *)srcGm);
        dstGlobal.SetGlobalBuffer((__gm__ T *)dstGm);
        maxGlobal.SetGlobalBuffer((__gm__ T *)inMaxGm);
        sumGlobal.SetGlobalBuffer((__gm__ T *)inSumGm);

        pipe.InitBuffer(inQueueSrc, 1, height * width * sizeof(T));
        pipe.InitBuffer(maxQueue, 1, height * elementNumPerBlk * sizeof(T));
        pipe.InitBuffer(sumQueue, 1, height * elementNumPerBlk * sizeof(T));
        pipe.InitBuffer(outQueueDst, 1, height * width * sizeof(T));
        tiling = tilingData;
    }
    __aicore__ inline void Process()
    {
        CopyIn();
        Compute();
        CopyOut();
    }

private:
    __aicore__ inline void CopyIn()
    {
        AscendC::LocalTensor<T> srcLocal = inQueueSrc.AllocTensor<T>();
        AscendC::LocalTensor<T> sumTempLocal = sumQueue.AllocTensor<T>();
        AscendC::LocalTensor<T> maxTempLocal = maxQueue.AllocTensor<T>();
        AscendC::DataCopy(srcLocal, srcGlobal, height * width);
        AscendC::DataCopy(sumTempLocal, sumGlobal, height * elementNumPerBlk);
        AscendC::DataCopy(maxTempLocal, maxGlobal, height * elementNumPerBlk);
        inQueueSrc.EnQue(srcLocal);
        sumQueue.EnQue(sumTempLocal);
        maxQueue.EnQue(maxTempLocal);
    }
    __aicore__ inline void Compute()
    {
        AscendC::LocalTensor<T> srcLocal = inQueueSrc.DeQue<T>();
        AscendC::LocalTensor<T> sumTempLocal = sumQueue.DeQue<T>();
        AscendC::LocalTensor<T> maxTempLocal = maxQueue.DeQue<T>();
        AscendC::LocalTensor<T> dstLocal = outQueueDst.AllocTensor<T>();

        AscendC::SoftMaxShapeInfo srcShape = {height, width, height, width};
        AscendC::SimpleSoftMax<T>(dstLocal, sumTempLocal, maxTempLocal, srcLocal, tiling, srcShape);
        // AscendC::SimpleSoftMax<T, false, false, static_config>(dstLocal, sumTempLocal, maxTempLocal, srcLocal, tiling, //srcShape); Use the static_config parameter of the SoftmaxConfig type and pass the template parameter to turn the shape into a constant value.

        outQueueDst.EnQue<T>(dstLocal);
        maxQueue.FreeTensor(maxTempLocal);
        sumQueue.FreeTensor(sumTempLocal);
        inQueueSrc.FreeTensor(srcLocal);
    }
    __aicore__ inline void CopyOut()
    {
        AscendC::LocalTensor<T> dstLocal = outQueueDst.DeQue<T>();
        AscendC::DataCopy(dstGlobal, dstLocal, height * width);
        outQueueDst.FreeTensor(dstLocal);
    }

private:
    AscendC::TPipe pipe;
    AscendC::TQue<AscendC::QuePosition::VECIN, 1> inQueueSrc;
    AscendC::TQue<AscendC::QuePosition::VECIN, 1> maxQueue;
    AscendC::TQue<AscendC::QuePosition::VECIN, 1> sumQueue;
    AscendC::TQue<AscendC::QuePosition::VECOUT, 1> outQueueDst;
    AscendC::GlobalTensor<T> srcGlobal, dstGlobal;
    AscendC::GlobalTensor<T> maxGlobal, sumGlobal;
    uint32_t elementNumPerBlk = 0;
    uint32_t width = 64;
    uint32_t height = 320;
    SoftMaxTiling tiling;
};

extern "C" __global__ __aicore__ void simple_softmax_kernel_half(__gm__ uint8_t *srcGm, __gm__ uint8_t *inMaxGm,
    __gm__ uint8_t *inSumGm, __gm__ uint8_t *dstGm, __gm__ uint8_t *tiling)
{
    GET_TILING_DATA(tilingData, tiling);
    KernelSimpleSoftmax<half> op;
    op.Init(srcGm, inMaxGm, inSumGm, dstGm, tilingData.softmaxTilingData);
    op.Process();
}