Checking the Environment

Description

Run a built-in operator sample to check the software and hardware environments.

Applicability

Product	Supported
Atlas 350 Accelerator Card	√
Atlas A3 training product/Atlas A3 inference product	√
Atlas A2 training product/Atlas A2 inference product	√
Atlas 200I/500 A2 inference product	√
Atlas inference product	√
Atlas training product	√

Command

python3 msaicerr.py -e -dev 0

Parameters

-e or --env: The parameter is mandatory. It indicates checking the environment.
-dev or --device_id: The parameter is optional. It specifies the ID of the device where the built-in operator sample runs. If this parameter is not set, the default device ID is 0. The msaicerr tool runs a built-in operator sample to check whether the software and hardware environments are normal.

Usage Example and Output Description

python3 msaicerr.py -e

Output example:

[INFO] Total device count: 1
[INFO] Valid device_id 0
[INFO] Get soc_version: xxxxxxx
[INFO] Start to test env with golden op.
[INFO] The build-in sample operator runs successfully, The environment is normal.

After the msaicerr.py tool is executed, the debug_info.txt file is generated in the same directory as the msaicerr.py tool to record the log information generated during the tool execution.

Parent topic: msaicerr Tool Usage Guide