Documentation
Download
文档中心
aclnnApplyTopKTopP

aclnnForeachPowScalarAndTensor

📄 View Source Code

Applicable Products

ProductSupported
Ascend 950PR/Ascend 950DT×
Atlas A3 training products/Atlas A3 inference products√
Atlas A2 training products/Atlas A2 inference products√
Atlas 200I/500 A2 inference products×
Atlas inference products×
Atlas training products×

Function

  • Description: Performs a power operation on each tensor in the input tensor list x, with the input scalar as the base.

  • Formula:

    x=[x0,x1,...xn−1]y=[y0,y1,...yn−1]x = [{x_0}, {x_1}, ... {x_{n-1}}]\\ y = [{y_0}, {y_1}, ... {y_{n-1}}]\\ yi=scalarxi(i=0,1,...n−1)y_i = scalar^{x_i} (i=0,1,...n-1)

Function Prototype

Each operator is divided into a two-phase API. You must first call the "aclnnForeachPowScalarAndTensorGetWorkspaceSize" API to obtain the input parameters and calculate the required workspace size based on the computation process, and then call the "aclnnForeachPowScalarAndTensor" API to perform the computation.

aclnnStatus aclnnForeachPowScalarAndTensorGetWorkspaceSize(
  const aclScalar     *scalar,
  const aclTensorList *x,
  const aclTensorList *out,
  uint64_t            *workspaceSize,
  aclOpExecutor      **executor)
aclnnStatus aclnnForeachPowScalarAndTensor(
  void          *workspace,
  uint64_t       workspaceSize,
  aclOpExecutor *executor,
  aclrtStream    stream)

aclnnForeachPowScalarAndTensorGetWorkspaceSize

  • Parameters

    Parameter Input/Output Description Instruction Data Type Data Format Dimension (Shape) Non-contiguous Tensor
    Scalar (aclScalar*) Input Represents the base of the power operation, corresponding to `scalar` in the formula. The data type has a specific correspondence with the data type of the input `x`:
    • When the data type of `x` is FLOAT32, FLOAT16, or BFLOAT16, the supported data types are FLOAT32 and DOUBLE.
    • When the data type of `x` is INT32, the supported data type is INT64.
    		 FLOAT32, DOUBLE, INT64 - - -
    x (aclTensorList*) Input Represents the exponent for the power operation, corresponding to `x` in the formula.
    • Supports empty tensors.
    • The absolute value must be less than or equal to (2^31-1).
    		 FLOAT32, FLOAT16, BFLOAT16, INT32 ND 0-8 √
    out (aclTensorList*) Output Represents the output tensor list for the power operation, corresponding to `y` in the formula.
    • Supports empty tensors.
    • All tensors in this parameter must have the same data type.
    • The data type and data format are consistent with those of the input `x`, and the shape size is greater than or equal to the shape size of the input `x`.
    		 FLOAT32, FLOAT16, BFLOAT16, INT32 ND 0-8 √
    workspaceSize (uint64_t*) Output Returns the workspace size to be requested on the Device. - - - - -
    executor (aclOpExecutor**) Output Returns the op executor, which contains the operator computation flow. - - - - -

  • Return Value

    aclnnStatus: return code. For details, see aclnn Return Code.

    The first-phase API performs input parameter validation and returns an error in the following scenarios:

    Return Code Error Code Description
    ACLNN_ERR_PARAM_NULLPTR 161001 The input x, scalar, or out is a null pointer.
    ACLNN_ERR_PARAM_INVALID 161002 The data types of x, scalar, and out are not within the supported range.
    The data types of x and out are inconsistent.
    ACLNN_ERR_INNER_TILING_ERROR 561002 The shapes of x and out do not satisfy the constraints.
    The data types of tensors in x or out are inconsistent.
    A tensor in x or out has more than 8 dimensions.

aclnnForeachPowScalarAndTensor

  • Parameters

    Parameter Input/Output Description
    workspace Input Address of the workspace memory applied for on the Device side.
    workspaceSize Input Size of the workspace applied for on the Device side, obtained through the first-phase API aclnnForeachPowScalarAndTensorGetWorkspaceSize.
    executor Input Op executor that contains the operator computation flow.
    stream Input Specifies the stream for task execution.

  • Return Value

    aclnnStatus: return code. For details, see aclnn Return Code.

Constraints

  • Deterministic computation:

    • aclnnForeachPowScalarAndTensor defaults to a deterministic implementation.

Example

The following provides example code for reference only. For details about compilation and running, see Compile and Run Samples.

#include <iostream>
#include <vector>
#include "acl/acl.h"
#include "aclnnop/aclnn_foreach_pow_scalar_and_tensor.h"

#define CHECK_RET(cond, return_expr) \
  do {                               \
    if (!(cond)) {                   \
      return_expr;                   \
    }                                \
  } while (0)

#define LOG_PRINT(message, ...)     \
  do {                              \
    printf(message, ##__VA_ARGS__); \
  } while (0)

int64_t GetShapeSize(const std::vector<int64_t>& shape) {
  int64_t shapeSize = 1;
  for (auto i : shape) {
    shapeSize *= i;
  }
  return shapeSize;
}

int Init(int32_t deviceId, aclrtStream* stream) {
  // Boilerplate for resource initialization.
  auto ret = aclInit(nullptr);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclInit failed. ERROR: %d\n", ret); return ret);
  ret = aclrtSetDevice(deviceId);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtSetDevice failed. ERROR: %d\n", ret); return ret);
  ret = aclrtCreateStream(stream);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtCreateStream failed. ERROR: %d\n", ret); return ret);
  return 0;
}

template <typename T>
int CreateAclTensor(const std::vector<T>& hostData, const std::vector<int64_t>& shape, void** deviceAddr,
                    aclDataType dataType, aclTensor** tensor) {
  auto size = GetShapeSize(shape) * sizeof(T);
  // Call aclrtMalloc to allocate device memory.
  auto ret = aclrtMalloc(deviceAddr, size, ACL_MEM_MALLOC_HUGE_FIRST);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtMalloc failed. ERROR: %d\n", ret); return ret);
  // Copy host-side data to device-side memory by calling aclrtMemcpy.
  ret = aclrtMemcpy(*deviceAddr, size, hostData.data(), size, ACL_MEMCPY_HOST_TO_DEVICE);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtMemcpy failed. ERROR: %d\n", ret); return ret);

  // Calculate the strides of a contiguous tensor.
  std::vector<int64_t> strides(shape.size(), 1);
  for (int64_t i = shape.size() - 2; i >= 0; i--) {
    strides[i] = shape[i + 1] * strides[i + 1];
  }

  // Call the aclCreateTensor API to create an aclTensor.
  *tensor = aclCreateTensor(shape.data(), shape.size(), dataType, strides.data(), 0, aclFormat::ACL_FORMAT_ND,
                            shape.data(), shape.size(), *deviceAddr);
  return 0;
}

int main() {
  // 1. (Boilerplate) Initialize the device/stream. See the ACL API manual.
  // Set deviceId based on the actual device.
  int32_t deviceId = 0;
  aclrtStream stream;
  auto ret = Init(deviceId, &stream);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("Init acl failed. ERROR: %d\n", ret); return ret);

  // 2. Construct the input and output. Customize the construction based on the API.
  std::vector<int64_t> selfShape1 = {2, 3};
  std::vector<int64_t> selfShape2 = {1, 3};
  std::vector<int64_t> outShape1 = {2, 3};
  std::vector<int64_t> outShape2 = {1, 3};
  void* input1DeviceAddr = nullptr;
  void* input2DeviceAddr = nullptr;
  void* out1DeviceAddr = nullptr;
  void* out2DeviceAddr = nullptr;
  aclTensor* input1 = nullptr;
  aclTensor* input2 = nullptr;
  aclScalar* alpha = nullptr;
  aclTensor* out1 = nullptr;
  aclTensor* out2 = nullptr;
  std::vector<float> input1HostData = {1, 2, 3, 4, 5, 6};
  std::vector<float> input2HostData = {7, 8, 9};
  std::vector<float> out1HostData(6, 0);
  std::vector<float> out2HostData(3, 0);
  float alphaValue = 1.2f;
  // Create input1 aclTensor.
  ret = CreateAclTensor(input1HostData, selfShape1, &input1DeviceAddr, aclDataType::ACL_FLOAT, &input1);
  CHECK_RET(ret == ACL_SUCCESS, return ret);
  // Create input2 aclTensor.
  ret = CreateAclTensor(input2HostData, selfShape2, &input2DeviceAddr, aclDataType::ACL_FLOAT, &input2);
  CHECK_RET(ret == ACL_SUCCESS, return ret);
  // Create alpha aclScalar.
  alpha = aclCreateScalar(&alphaValue, aclDataType::ACL_FLOAT);
  CHECK_RET(alpha != nullptr, return ret);
  // Create out1 aclTensor.
  ret = CreateAclTensor(out1HostData, outShape1, &out1DeviceAddr, aclDataType::ACL_FLOAT, &out1);
  CHECK_RET(ret == ACL_SUCCESS, return ret);
  // Create out2 aclTensor.
  ret = CreateAclTensor(out2HostData, outShape2, &out2DeviceAddr, aclDataType::ACL_FLOAT, &out2);
  CHECK_RET(ret == ACL_SUCCESS, return ret);
  std::vector<aclTensor*> tempInput{input1, input2};
  aclTensorList* tensorListInput = aclCreateTensorList(tempInput.data(), tempInput.size());
  std::vector<aclTensor*> tempOutput{out1, out2};
  aclTensorList* tensorListOutput = aclCreateTensorList(tempOutput.data(), tempOutput.size());

  // 3. Call the CANN operator library API. Replace with the specific API name.
  uint64_t workspaceSize = 0;
  aclOpExecutor* executor;
  // Call the first-phase API of aclnnForeachPowScalarAndTensor.
  ret = aclnnForeachPowScalarAndTensorGetWorkspaceSize(alpha, tensorListInput, tensorListOutput, &workspaceSize, &executor);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclnnForeachPowScalarAndTensorGetWorkspaceSize failed. ERROR: %d\n", ret); return ret);
  // Apply for device memory based on the workspaceSize calculated by the first-phase API.
  void* workspaceAddr = nullptr;
  if (workspaceSize > 0) {
    ret = aclrtMalloc(&workspaceAddr, workspaceSize, ACL_MEM_MALLOC_HUGE_FIRST);
    CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("allocate workspace failed. ERROR: %d\n", ret); return ret);
  }
  // Call the second-phase API of aclnnForeachPowScalarAndTensor.
  ret = aclnnForeachPowScalarAndTensor(workspaceAddr, workspaceSize, executor, stream);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclnnForeachPowScalarAndTensor failed. ERROR: %d\n", ret); return ret);

  // 4. (Boilerplate) Synchronously wait for task execution to complete.
  ret = aclrtSynchronizeStream(stream);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtSynchronizeStream failed. ERROR: %d\n", ret); return ret);

  // 5. Obtain the output value and copy the result from the device memory to the host memory. Modify based on the specific API definition.
  auto size = GetShapeSize(outShape1);
  std::vector<float> out1Data(size, 0);
  ret = aclrtMemcpy(out1Data.data(), out1Data.size() * sizeof(out1Data[0]), out1DeviceAddr,
                    size * sizeof(out1Data[0]), ACL_MEMCPY_DEVICE_TO_HOST);
  for (int64_t i = 0; i < size; i++) {
    LOG_PRINT("out1 result[%ld] is: %f\n", i, out1Data[i]);
  }

  size = GetShapeSize(outShape2);
  std::vector<float> out2Data(size, 0);
  ret = aclrtMemcpy(out2Data.data(), out2Data.size() * sizeof(out2Data[0]), out2DeviceAddr,
                    size * sizeof(out2Data[0]), ACL_MEMCPY_DEVICE_TO_HOST);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("copy result from device to host failed. ERROR: %d\n", ret); return ret);
  for (int64_t i = 0; i < size; i++) {
    LOG_PRINT("out2 result[%ld] is: %f\n", i, out2Data[i]);
  }

  // 6. Destroy aclTensor and aclScalar. Modify based on the specific API definition.
  aclDestroyTensorList(tensorListInput);
  aclDestroyTensorList(tensorListOutput);
  aclDestroyScalar(alpha);

  // 7. Free device resources. Modify based on the specific API definition.
  aclrtFree(input1DeviceAddr);
  aclrtFree(input2DeviceAddr);
  aclrtFree(out1DeviceAddr);
  aclrtFree(out2DeviceAddr);
  if (workspaceSize > 0) {
    aclrtFree(workspaceAddr);
  }
  aclrtDestroyStream(stream);
  aclrtResetDevice(deviceId);
  aclFinalize();
  return 0;
}
This site uses cookies to improve your browsing experience. By continuing to browse this site, you agree to our use of cookies.View Details