文档
下载
文档中心
aclnnMultilabelMarginLoss

aclnnForeachAddcmulScalarList

📄 View Source Code

Applicable Products

ProductSupported
Ascend 950PR/Ascend 950DT×
Atlas A3 training products/Atlas A3 inference products√
Atlas A2 training products/Atlas A2 inference products√
Atlas 200I/500 A2 inference products×
Atlas inference products×
Atlas training products×

Function

  • Description: Performs element-wise multiplication on tensor list x2 and tensor list x3, then performs element-wise multiplication with tensor scalars, and finally performs element-wise addition of the previously computed result with tensor list x1.

  • Formula:

    x1=[x10,x11,...x1n−1],x2=[x20,x21,...x2n−1],x3=[x30,x31,...x3n−1]scalars=[scalars0,scalars1,...scalarsn−1]y=[y0,y1,...yn−1]x1 = [{x1_0}, {x1_1}, ... {x1_{n-1}}], x2 = [{x2_0}, {x2_1}, ... {x2_{n-1}}], x3 = [{x3_0}, {x3_1}, ... {x3_{n-1}}]\\ scalars = [{scalars_0}, {scalars_1}, ... {scalars_{n-1}}]\\ y = [{y_0}, {y_1}, ... {y_{n-1}}]\\ yi=x1i+scalarsi×x2i×x3i(i=0,1,...n−1){\rm y}_i = x1_{i} + {\rm scalars}_i × x2_{i} × x3_{i} (i=0,1,...n-1)

Function Prototype

Each operator is divided into a two-phase API. You must first call the "aclnnForeachAddcmulScalarListGetWorkspaceSize" API to obtain the input parameters and calculate the required workspace size based on the computation process, and then call the "aclnnForeachAddcmulScalarList" API to perform the computation.

aclnnStatus aclnnForeachAddcmulScalarListGetWorkspaceSize(
  const aclTensorList *x1,
  const aclTensorList *x2,
  const aclTensorList *x3,
  const aclTensor     *scalars,
  const aclTensorList *out,
  uint64_t            *workspaceSize,
  aclOpExecutor      **executor)
aclnnStatus aclnnForeachAddcmulScalarList(
  void          *workspace,
  uint64_t       workspaceSize,
  aclOpExecutor *executor,
  aclrtStream    stream)

aclnnForeachAddcmulScalarListGetWorkspaceSize

  • Parameters

    Parameter Input/Output Description Instruction Data Type Data Format Shape Non-contiguous Tensor
    x1 (aclTensorList*) Input The first input tensor list for the addition in the mixed computation. Corresponds to `x1` in the formula.
    • Empty tensors are supported.
    • All tensors in this parameter must have the same data type.
    • The shape must be consistent with the shapes of the input parameters `x2` and `x3`.
    		 FLOAT32, FLOAT16, BFLOAT16, INT32 ND 0-8 √
    x2 (aclTensorList*) Input Represents the second input tensor list for the multiplication in the mixed computation. Corresponds to `x2` in the formula.
    • Empty tensors are supported.
    • All tensors in this parameter must have the same data type.
    • The data type, data format, and shape must be consistent with the input x1.
    		 FLOAT32, FLOAT16, BFLOAT16, INT32 ND 0-8 √
    x3 (aclTensorList*) Input Represents the third input tensor list for multiplication in the mixed computation. Corresponds to `x3` in the formula.
    • Supports empty tensors.
    • All tensors in this parameter must have the same data type.
    • The data type, data format, and shape must be consistent with the input parameter `x1`.
    		 FLOAT32, FLOAT16, BFLOAT16, INT32 ND 0-8 √
    scalars (aclTensor*) Input Represents the first input tensor for multiplication in the mixed computation. Corresponds to `scalars` in the formula.
    • Empty tensors are not supported.
    • The number of elements equals the number of tensors in `x1`.
    • The data type and data format are consistent with the input parameter `x1`.
    		 FLOAT32, FLOAT16, BFLOAT16, INT32 ND 0-8 √
    out (aclTensorList*) Output Represents the output tensor list for mixed computation. Corresponds to `y` in the formula.
    • Empty tensors are supported.
    • All tensors in this parameter must have the same data type.
    • The data type and data format must be consistent with those of the input parameter `x1`, and the shape size must be greater than or equal to the shape size of the input parameter `x1`.
    		 FLOAT32, FLOAT16, BFLOAT16, INT32 ND 0-8 √
    workspaceSize (uint64_t*) Output Returns the workspace size to be requested on the Device side. - - - - -
    executor (aclOpExecutor**) Output Returns the op executor, which contains the operator computation flow. - - - - -

  • Return Value

    aclnnStatus: return code. For details, see aclnn Return Code.

    The first-phase API performs input parameter validation and returns an error in the following scenarios:

    Return Code Error Code Description
    ACLNN_ERR_PARAM_NULLPTR 161001 The input x1, x2, x3, scalars, and out are null pointers.
    ACLNN_ERR_PARAM_INVALID 161002 The data types of x1, x2, x3, scalars, and out are not within the supported range.
    The data types of x1, x2, x3, scalars, and out are inconsistent.
    ACLNN_ERR_INNER_TILING_ERROR 561002 The shapes of x1, x2, x3, and out do not satisfy the constraints.
    The element data types of tensors in x1, x2, x3, or out are inconsistent.
    A tensor in x1, x2, x3, or out has more than 8 dimensions.

aclnnForeachAddcmulScalarList

  • Parameters

    Parameter Input/Output Description
    workspace Input Address of the workspace memory applied for on the Device side.
    workspaceSize Input Size of the workspace applied for on the Device side, obtained through the first-phase API aclnnForeachAddcmulScalarListGetWorkspaceSize.
    executor Input Operator executor, which contains the operator computation flow.
    stream Input Specifies the stream for task execution.

  • Return Value

    aclnnStatus: return code. For details, see aclnn Return Code.

Constraints

  • Deterministic computation:

    • aclnnForeachAddcmulScalarList defaults to a deterministic implementation.

Example

The following provides example code for reference only. For details about compilation and running, see Compile and Run Samples.

#include <iostream>
#include <vector>
#include "acl/acl.h"
#include "aclnnop/aclnn_foreach_addcmul_scalar_list.h"

#define CHECK_RET(cond, return_expr) \
  do {                               \
    if (!(cond)) {                   \
      return_expr;                   \
    }                                \
  } while (0)

#define LOG_PRINT(message, ...)     \
  do {                              \
    printf(message, ##__VA_ARGS__); \
  } while (0)

int64_t GetShapeSize(const std::vector<int64_t>& shape) {
  int64_t shapeSize = 1;
  for (auto i : shape) {
    shapeSize *= i;
  }
  return shapeSize;
}

int Init(int32_t deviceId, aclrtStream *stream)
{
    // Boilerplate for resource initialization.
    auto ret = aclInit(nullptr);
    CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclInit failed. ERROR: %d\n", ret); return ret);
    ret = aclrtSetDevice(deviceId);
    CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtSetDevice failed. ERROR: %d\n", ret); return ret);
    ret = aclrtCreateStream(stream);
    CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtCreateStream failed. ERROR: %d\n", ret); return ret);
    return 0;
}

template <typename T>
int CreateAclTensor(const std::vector<T>& hostData, const std::vector<int64_t>& shape, void** deviceAddr,
                    aclDataType dataType, aclTensor** tensor) {
  auto size = GetShapeSize(shape) * sizeof(T);
  // Call aclrtMalloc to allocate device memory.
  auto ret = aclrtMalloc(deviceAddr, size, ACL_MEM_MALLOC_HUGE_FIRST);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtMalloc failed. ERROR: %d\n", ret); return ret);
  // Copy data from the host side to the device memory.
  ret = aclrtMemcpy(*deviceAddr, size, hostData.data(), size, ACL_MEMCPY_HOST_TO_DEVICE);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtMemcpy failed. ERROR: %d\n", ret); return ret);

  // Calculate the strides of a contiguous tensor.
  std::vector<int64_t> strides(shape.size(), 1);
  for (int64_t i = shape.size() - 2; i >= 0; i--) {
    strides[i] = shape[i + 1] * strides[i + 1];
  }

  // Call the aclCreateTensor API to create an aclTensor.
  *tensor = aclCreateTensor(shape.data(), shape.size(), dataType, strides.data(), 0, aclFormat::ACL_FORMAT_ND,
                            shape.data(), shape.size(), *deviceAddr);
  return 0;
}

int main() {
  // 1. (Boilerplate) Initialize the device/stream. See the ACL API manual.
  // Set deviceId based on the actual device.
  int32_t deviceId = 0;
  aclrtStream stream;
  auto ret = Init(deviceId, &stream);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("Init acl failed. ERROR: %d\n", ret); return ret);

  // 2. Construct the input and output. Custom construction is required based on the API interface.
  std::vector<int64_t> selfShape1 = {2, 3};
  std::vector<int64_t> selfShape2 = {1, 3};
  std::vector<int64_t> otherShape1 = {2, 3};
  std::vector<int64_t> otherShape2 = {1, 3};
  std::vector<int64_t> anotherShape1 = {2, 3};
  std::vector<int64_t> anotherShape2 = {1, 3};
  std::vector<int64_t> outShape1 = {2, 3};
  std::vector<int64_t> outShape2 = {1, 3};
  std::vector<int64_t> scalarsShape = {2};
  void* input1DeviceAddr = nullptr;
  void* input2DeviceAddr = nullptr;
  void* other1DeviceAddr = nullptr;
  void* other2DeviceAddr = nullptr;
  void* another1DeviceAddr = nullptr;
  void* another2DeviceAddr = nullptr;
  void* out1DeviceAddr = nullptr;
  void* out2DeviceAddr = nullptr;
  void* scalarsDeviceAddr = nullptr;
  aclTensor* input1 = nullptr;
  aclTensor* input2 = nullptr;
  aclTensor* other1 = nullptr;
  aclTensor* other2 = nullptr;
  aclTensor* another1 = nullptr;
  aclTensor* another2 = nullptr;
  aclTensor* scalars = nullptr;
  aclTensor* out1 = nullptr;
  aclTensor* out2 = nullptr;
  std::vector<float> input1HostData = {1, 2, 3, 4, 5, 6};
  std::vector<float> input2HostData = {7, 8, 9};
  std::vector<float> other1HostData = {4, 3, 8, 9, 3, 5};
  std::vector<float> other2HostData = {5, 6, 7};
  std::vector<float> another1HostData = {1, 2, 3, 4, 5, 6};
  std::vector<float> another2HostData = {7, 8, 9};
  std::vector<float> out1HostData(6, 0);
  std::vector<float> out2HostData(3, 0);
  std::vector<float> scalarsHostData{1.2f, 2.2f};
  // Create the input1 aclTensor.
  ret = CreateAclTensor(input1HostData, selfShape1, &input1DeviceAddr, aclDataType::ACL_FLOAT, &input1);
  CHECK_RET(ret == ACL_SUCCESS, return ret);
  // Create the input2 aclTensor.
  ret = CreateAclTensor(input2HostData, selfShape2, &input2DeviceAddr, aclDataType::ACL_FLOAT, &input2);
  CHECK_RET(ret == ACL_SUCCESS, return ret);
  // Create the other1 aclTensor.
  ret = CreateAclTensor(other1HostData, otherShape1, &other1DeviceAddr, aclDataType::ACL_FLOAT, &other1);
  CHECK_RET(ret == ACL_SUCCESS, return ret);
  // Create the other2 aclTensor.
  ret = CreateAclTensor(other2HostData, otherShape2, &other2DeviceAddr, aclDataType::ACL_FLOAT, &other2);
  CHECK_RET(ret == ACL_SUCCESS, return ret);
  // Create another1 aclTensor.
  ret = CreateAclTensor(another1HostData, anotherShape1, &another1DeviceAddr, aclDataType::ACL_FLOAT, &another1);
  CHECK_RET(ret == ACL_SUCCESS, return ret);
  // Create another2 aclTensor.
  ret = CreateAclTensor(another2HostData, anotherShape2, &another2DeviceAddr, aclDataType::ACL_FLOAT, &another2);
  CHECK_RET(ret == ACL_SUCCESS, return ret);
  // Create scalars aclTensor.
  ret = CreateAclTensor(scalarsHostData, scalarsShape, &scalarsDeviceAddr, aclDataType::ACL_FLOAT, &scalars);
  CHECK_RET(ret == ACL_SUCCESS, return ret);
  // Create out1 aclTensor.
  ret = CreateAclTensor(out1HostData, outShape1, &out1DeviceAddr, aclDataType::ACL_FLOAT, &out1);
  CHECK_RET(ret == ACL_SUCCESS, return ret);
  // Create out2 aclTensor.
  ret = CreateAclTensor(out2HostData, outShape2, &out2DeviceAddr, aclDataType::ACL_FLOAT, &out2);
  CHECK_RET(ret == ACL_SUCCESS, return ret);

  std::vector<aclTensor*> tempInput1{input1, input2};
  aclTensorList* tensorListInput1 = aclCreateTensorList(tempInput1.data(), tempInput1.size());
  std::vector<aclTensor*> tempInput2{other1, other2};
  aclTensorList* tensorListInput2 = aclCreateTensorList(tempInput2.data(), tempInput2.size());
  std::vector<aclTensor*> tempAnother{another1, another2};
  aclTensorList* tensorListAnother = aclCreateTensorList(tempAnother.data(), tempAnother.size());
  std::vector<aclTensor*> tempOutput{out1, out2};
  aclTensorList* tensorListOutput = aclCreateTensorList(tempOutput.data(), tempOutput.size());

  // 3. Call the CANN operator library API. Replace with the actual API name.
  uint64_t workspaceSize = 0;
  aclOpExecutor* executor;
  // Call the first-phase API of aclnnForeachAddcmulScalarList.
  ret = aclnnForeachAddcmulScalarListGetWorkspaceSize(tensorListInput1, tensorListInput2, tensorListAnother, scalars, tensorListOutput, &workspaceSize, &executor);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclnnForeachAddcmulScalarListGetWorkspaceSize failed. ERROR: %d\n", ret); return ret);
  // Allocate device memory based on the workspaceSize calculated by the first-phase API.
  void* workspaceAddr = nullptr;
  if (workspaceSize > 0) {
    ret = aclrtMalloc(&workspaceAddr, workspaceSize, ACL_MEM_MALLOC_HUGE_FIRST);
    CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("allocate workspace failed. ERROR: %d\n", ret); return ret);
  }
  // Call the second-phase API of aclnnForeachAddcmulScalarList.
  ret = aclnnForeachAddcmulScalarList(workspaceAddr, workspaceSize, executor, stream);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclnnForeachAddcmulScalarList failed. ERROR: %d\n", ret); return ret);

  // 4. (Boilerplate) Synchronously wait for the task execution to complete.
  ret = aclrtSynchronizeStream(stream);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtSynchronizeStream failed. ERROR: %d\n", ret); return ret);

  // 5. Obtain the output value and copy the result from the device memory to the host memory. Modify based on the specific API definition.
  auto size = GetShapeSize(outShape1);
  std::vector<float> out1Data(size, 0);
  ret = aclrtMemcpy(out1Data.data(), out1Data.size() * sizeof(out1Data[0]), out1DeviceAddr,
                    size * sizeof(out1Data[0]), ACL_MEMCPY_DEVICE_TO_HOST);
  for (int64_t i = 0; i < size; i++) {
    LOG_PRINT("out1 result[%ld] is: %f\n", i, out1Data[i]);
  }

  size = GetShapeSize(outShape2);
  std::vector<float> out2Data(size, 0);
  ret = aclrtMemcpy(out2Data.data(), out2Data.size() * sizeof(out2Data[0]), out2DeviceAddr,
                    size * sizeof(out2Data[0]), ACL_MEMCPY_DEVICE_TO_HOST);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("copy result from device to host failed. ERROR: %d\n", ret); return ret);
  for (int64_t i = 0; i < size; i++) {
    LOG_PRINT("out2 result[%ld] is: %f\n", i, out2Data[i]);
  }

  // 6. Release aclTensor. Modify based on the specific API definition.
  aclDestroyTensorList(tensorListInput1);
  aclDestroyTensorList(tensorListInput2);
  aclDestroyTensorList(tensorListAnother);
  aclDestroyTensorList(tensorListOutput);
  aclDestroyTensor(scalars);

  // 7. Release device resources. Modify based on the specific API definition.
  aclrtFree(input1DeviceAddr);
  aclrtFree(input2DeviceAddr);
  aclrtFree(other1DeviceAddr);
  aclrtFree(other2DeviceAddr);
  aclrtFree(another1DeviceAddr);
  aclrtFree(another2DeviceAddr);
  aclrtFree(scalarsDeviceAddr);
  aclrtFree(out1DeviceAddr);
  aclrtFree(out2DeviceAddr);
  if (workspaceSize > 0) {
    aclrtFree(workspaceAddr);
  }
  aclrtDestroyStream(stream);
  aclrtResetDevice(deviceId);
  aclFinalize();
  return 0;
}
我们使用cookie来确保您的高速浏览体验。继续浏览本站，即表示您同意我们使用cookie。查看详情