Documentation
Download
文档中心
aclnnSmoothL1LossBackward

aclnnForeachAcos

📄 View Source Code

Applicable Products

ProductSupported
Ascend 950PR/Ascend 950DT×
Atlas A3 training products/Atlas A3 inference products√
Atlas A2 training products/Atlas A2 inference products√
Atlas 200I/500 A2 inference products×
Atlas inference products×
Atlas training products×

Function

  • Description: Performs element-wise arccosine operation on each tensor in the input tensor list.

  • Formula:

    x=[x0,x1,...xn−1]y=[y0,y1,...yn−1]x = [{x_0}, {x_1}, ... {x_{n-1}}]\\ y = [{y_0}, {y_1}, ... {y_{n-1}}]\\ yi=cos−1(xi)(i=0,1,...n−1)y_i=cos^{-1}({x_i}) (i=0,1,...n-1)

Function Prototype

Each operator is divided into a two-phase API. You must first call the "aclnnForeachAcosGetWorkspaceSize" API to obtain the input parameters and calculate the required workspace size based on the process, and then call the "aclnnForeachAcos" API to perform the computation.

aclnnStatus aclnnForeachAcosGetWorkspaceSize(
  const aclTensorList *x,
  const aclTensorList *out,
  uint64_t            *workspaceSize,
  aclOpExecutor      **executor)
aclnnStatus aclnnForeachAcos(
  void          *workspace,
  uint64_t       workspaceSize,
  aclOpExecutor *executor,
  aclrtStream    stream)

aclnnForeachAcosGetWorkspaceSize

  • Parameters

    Parameter Input/Output Description Instruction Data Type Data Format Shape Non-contiguous Tensor
    x (aclTensorList*) Input Represents the input tensor list for inverse cosine computation, corresponding to `x` in the formula.
    • Supports empty tensors.
    • All tensors in this parameter must have the same data type.
    		 BFLOAT16, FLOAT16, FLOAT32 ND 0-8 √
    out (aclTensorList*) Output Represents the output tensor list for the arccosine operation, corresponding to `y` in the formula.
    • Empty tensors are supported.
    • All tensors in this parameter must have the same data type.
    • The data type and data format are consistent with those of the input parameter `x`, and the shape size is greater than or equal to that of `x`.
    		 BFLOAT16, FLOAT16, FLOAT32 ND 0-8 √
    workspaceSize (uint64_t*) Output Returns the workspace size to be requested on the Device side. - - - - -
    executor (aclOpExecutor**) Output Returns the operator executor, which contains the operator computation process. - - - - -

  • Return Value

    aclnnStatus: return code. For details, see aclnn Return Code.

    The first-phase API performs input parameter validation and returns an error in the following scenarios:

    Return Code Error Code Description
    ACLNN_ERR_PARAM_NULLPTR 161001 The passed x or out is a null pointer.
    ACLNN_ERR_PARAM_INVALID 161002 The data type of x or out is not within the supported range.
    Inconsistent data types between x and out.
    ACLNN_ERR_INNER_TILING_ERROR 561002 The shapes of x and out do not satisfy the constraints.
    Inconsistent data types among tensors in x or out.
    The dimension of a tensor in x or out exceeds 8.

aclnnForeachAcos

  • Parameters

    Parameter Input/Output Description
    workspace Input The workspace memory address applied for on the Device side.
    workspaceSize Input The workspace size applied for on the Device side, obtained from the first-phase API aclnnForeachAcosGetWorkspaceSize.
    executor Input Operator executor, which contains the operator computation flow.
    stream Input Specifies the stream for task execution.

  • Return Value

    aclnnStatus: return code. For details, see aclnn Return Code.

Constraints

  • Deterministic computation:

    • aclnnForeachAcos defaults to a deterministic implementation.

Example

The following provides example code for reference only. For details about compilation and running, see Compile and Run Samples.

#include <iostream>
#include <vector>
#include "acl/acl.h"
#include "aclnnop/aclnn_foreach_acos.h"

#define CHECK_RET(cond, return_expr) \
  do {                               \
    if (!(cond)) {                   \
      return_expr;                   \
    }                                \
  } while (0)

#define LOG_PRINT(message, ...)     \
  do {                              \
    printf(message, ##__VA_ARGS__); \
  } while (0)

int64_t GetShapeSize(const std::vector<int64_t>& shape) {
  int64_t shapeSize = 1;
  for (auto i : shape) {
    shapeSize *= i;
  }
  return shapeSize;
}

int Init(int32_t deviceId, aclrtStream *stream)
{
    // Boilerplate: resource initialization.
    auto ret = aclInit(nullptr);
    CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclInit failed. ERROR: %d\n", ret); return ret);
    ret = aclrtSetDevice(deviceId);
    CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtSetDevice failed. ERROR: %d\n", ret); return ret);
    ret = aclrtCreateStream(stream);
    CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtCreateStream failed. ERROR: %d\n", ret); return ret);
    return 0;
}

template <typename T>
int CreateAclTensor(const std::vector<T>& hostData, const std::vector<int64_t>& shape, void** deviceAddr,
                    aclDataType dataType, aclTensor** tensor) {
  auto size = GetShapeSize(shape) * sizeof(T);
  // Call aclrtMalloc to apply for device-side memory.
  auto ret = aclrtMalloc(deviceAddr, size, ACL_MEM_MALLOC_HUGE_FIRST);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtMalloc failed. ERROR: %d\n", ret); return ret);
  // Copy host-side data to device-side memory using aclrtMemcpy.
  ret = aclrtMemcpy(*deviceAddr, size, hostData.data(), size, ACL_MEMCPY_HOST_TO_DEVICE);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtMemcpy failed. ERROR: %d\n", ret); return ret);

  // Calculate the strides of a contiguous tensor.
  std::vector<int64_t> strides(shape.size(), 1);
  for (int64_t i = shape.size() - 2; i >= 0; i--) {
    strides[i] = shape[i + 1] * strides[i + 1];
  }

  // Create an aclTensor by calling the aclCreateTensor API.
  *tensor = aclCreateTensor(shape.data(), shape.size(), dataType, strides.data(), 0, aclFormat::ACL_FORMAT_ND,
                            shape.data(), shape.size(), *deviceAddr);
  return 0;
}

int main() {
  // 1. (Boilerplate) Initialize the device/stream. See the ACL API manual.
  // Fill in the deviceId based on the actual device.
  int32_t deviceId = 0;
  aclrtStream stream;
  auto ret = Init(deviceId, &stream);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("Init acl failed. ERROR: %d\n", ret); return ret);

  // 2. Construct the input and output. Customize the construction based on the API.
  std::vector<int64_t> selfShape1 = {2, 3};
  std::vector<int64_t> selfShape2 = {1, 3};
  std::vector<int64_t> outShape1 = {2, 3};
  std::vector<int64_t> outShape2 = {1, 3};
  void* input1DeviceAddr = nullptr;
  void* input2DeviceAddr = nullptr;
  void* out1DeviceAddr = nullptr;
  void* out2DeviceAddr = nullptr;
  aclTensor* input1 = nullptr;
  aclTensor* input2 = nullptr;
  aclTensor* out1 = nullptr;
  aclTensor* out2 = nullptr;
  std::vector<float> input1HostData = {0.1, 0.2, 0.3, 0.4, 0.5, 0.6};
  std::vector<float> input2HostData = {0.7, 0.8, 0.9};
  std::vector<float> out1HostData(6, 0);
  std::vector<float> out2HostData(3, 0);

  // Create input1 aclTensor.
  ret = CreateAclTensor(input1HostData, selfShape1, &input1DeviceAddr, aclDataType::ACL_FLOAT, &input1);
  CHECK_RET(ret == ACL_SUCCESS, return ret);

  // Create input2 aclTensor.
  ret = CreateAclTensor(input2HostData, selfShape2, &input2DeviceAddr, aclDataType::ACL_FLOAT, &input2);
  CHECK_RET(ret == ACL_SUCCESS, return ret);

  // Create out1 aclTensor.
  ret = CreateAclTensor(out1HostData, outShape1, &out1DeviceAddr, aclDataType::ACL_FLOAT, &out1);
  CHECK_RET(ret == ACL_SUCCESS, return ret);

  // Create out2 aclTensor.
  ret = CreateAclTensor(out2HostData, outShape2, &out2DeviceAddr, aclDataType::ACL_FLOAT, &out2);
  CHECK_RET(ret == ACL_SUCCESS, return ret);

  std::vector<aclTensor*> tempInput{input1, input2};
  aclTensorList* tensorListInput = aclCreateTensorList(tempInput.data(), tempInput.size());
  std::vector<aclTensor*> tempOutput{out1, out2};
  aclTensorList* tensorListOutput = aclCreateTensorList(tempOutput.data(), tempOutput.size());

  // 3. Call the CANN operator library API. Replace it with the specific API name.
  uint64_t workspaceSize = 0;
  aclOpExecutor* executor;
  // Call the first-phase API of aclnnForeachAcos.
  ret = aclnnForeachAcosGetWorkspaceSize(tensorListInput, tensorListOutput, &workspaceSize, &executor);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclnnForeachAcosGetWorkspaceSize failed. ERROR: %d\n", ret); return ret);
  // Apply for device memory based on the workspaceSize calculated by the first-phase API.
  void* workspaceAddr = nullptr;
  if (workspaceSize > 0) {
    ret = aclrtMalloc(&workspaceAddr, workspaceSize, ACL_MEM_MALLOC_HUGE_FIRST);
    CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("allocate workspace failed. ERROR: %d\n", ret); return ret);
  }
  // Call the second-phase API of aclnnForeachAcos.
  ret = aclnnForeachAcos(workspaceAddr, workspaceSize, executor, stream);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclnnForeachAcos failed. ERROR: %d\n", ret); return ret);

  // 4. (Boilerplate) Synchronously wait for task execution to complete.
  ret = aclrtSynchronizeStream(stream);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtSynchronizeStream failed. ERROR: %d\n", ret); return ret);

  // 5. Obtain the output value and copy the result from the device memory to the host memory. Modify based on the specific API definition.
  auto size = GetShapeSize(outShape1);
  std::vector<float> out1Data(size, 0);
  ret = aclrtMemcpy(out1Data.data(), out1Data.size() * sizeof(out1Data[0]), out1DeviceAddr,
                    size * sizeof(out1Data[0]), ACL_MEMCPY_DEVICE_TO_HOST);
  for (int64_t i = 0; i < size; i++) {
    LOG_PRINT("out1 result[%ld] is: %f\n", i, out1Data[i]);
  }

  size = GetShapeSize(outShape2);
  std::vector<float> out2Data(size, 0);
  ret = aclrtMemcpy(out2Data.data(), out2Data.size() * sizeof(out2Data[0]), out2DeviceAddr,
                    size * sizeof(out2Data[0]), ACL_MEMCPY_DEVICE_TO_HOST);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("copy result from device to host failed. ERROR: %d\n", ret); return ret);
  for (int64_t i = 0; i < size; i++) {
    LOG_PRINT("out2 result[%ld] is: %f\n", i, out2Data[i]);
  }

  // 6. Release aclTensor. Modify based on the specific API definition.
  aclDestroyTensorList(tensorListInput);
  aclDestroyTensorList(tensorListOutput);

  // 7. Release device resources. Modify based on the specific API definition.
  aclrtFree(input1DeviceAddr);
  aclrtFree(input2DeviceAddr);
  aclrtFree(out1DeviceAddr);
  aclrtFree(out2DeviceAddr);
  if (workspaceSize > 0) {
    aclrtFree(workspaceAddr);
  }
  aclrtDestroyStream(stream);
  aclrtResetDevice(deviceId);
  aclFinalize();
  return 0;
}
This site uses cookies to improve your browsing experience. By continuing to browse this site, you agree to our use of cookies.View Details