aclnnBitwiseNot

📄 View Source Code

Applicable Products

Function

• Description: When the input is a BOOL-type tensor, a logical NOT operation is performed; when the input is an INT type, a bitwise NOT operation is performed.

• Formula:

  $$out_i = \lnot self_i$$

Function Prototype

Each operator is divided into a two-phase API. The "aclnnBitwiseNotGetWorkspaceSize" API must be called first to obtain the workspace size required for computation and the executor that encapsulates the operator computation flow. Then, the "aclnnBitwiseNot" API is called to perform the computation.

aclnnStatus aclnnBitwiseNotGetWorkspaceSize(
  const aclTensor*    self,
  aclTensor*          out,
  uint64_t*           workspaceSize,
  aclOpExecutor**     executor)

aclnnStatus aclnnBitwiseNot(
  void*             workspace,
  uint64_t          workspaceSize,
  aclOpExecutor*    executor,
  aclrtStream       stream)

aclnnBitwiseNotGetWorkspaceSize

• Parameters:

  Parameter	Input/Output	Description	Instruction	Data Type	Data Format	Dimension (shape)	Non-contiguous Tensor
  self (aclTensor*)	Input	self in the formula.	-	INT16, INT32, INT64, INT8, UINT8, BOOL	ND	-	√
  out (aclTensor*)	Output	The out in the formula.	Has the same shape as self, and the data type must be consistent with self.	INT16, INT32, INT64, INT8, UINT8, BOOL	ND	-	-
  workspaceSize (uint64_t*)	Output	Returns the workspace size to be requested on the Device side.	-	-	-	-	-
  executor (aclOpExecutor**)	Output	Returns the op executor, which contains the operator computation process.	-	-	-	-	-

• Return value

  aclnnStatus: return code. For details, see aclnn Return Codes.

  The first-phase API performs input parameter validation and returns an error in the following scenarios:

  Return Code	Error Code	Description
  ACLNN_ERR_PARAM_NULLPTR	161001	The passed self or out is a null pointer.
  ACLNN_ERR_PARAM_INVALID	161002	The data type of self is not within the supported range.
  		The data types of self and out are different.
  		The shapes of self and out are different.

aclnnBitwiseNot

• Parameters:

  Parameter	Input/Output	Description
  workspace	Input	Memory address of the workspace applied for on the device.
  workspaceSize	Input	Size of the workspace applied for on the device, obtained through the first-phase API aclnnBitwiseNotGetWorkspaceSize.
  executor	Input	Operator executor that contains the operator computation flow.
  stream	Input	Specifies the stream for task execution.

• Return value

  aclnnStatus: return code. For details, see aclnn Return Codes.

Constraints

• Deterministic computation:

  • aclnnBitwiseNot defaults to a deterministic implementation.

Example

The following provides example code for reference only. For details about compilation and running, see Compile and Run Samples.

#include <iostream>
#include <vector>
#include "acl/acl.h"
#include "aclnnop/aclnn_bitwise_not.h"

#define CHECK_RET(cond, return_expr) \
  do {                               \
    if (!(cond)) {                   \
      return_expr;                   \
    }                                \
  } while (0)

#define LOG_PRINT(message, ...)     \
  do {                              \
    printf(message, ##__VA_ARGS__); \
  } while (0)

int64_t GetShapeSize(const std::vector<int64_t>& shape) {
  int64_t shapeSize = 1;
  for (auto i : shape) {
    shapeSize *= i;
  }
  return shapeSize;
}

int Init(int32_t deviceId, aclrtStream* stream) {
  // Boilerplate for resource initialization.
  auto ret = aclInit(nullptr);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclInit failed. ERROR: %d\n", ret); return ret);
  ret = aclrtSetDevice(deviceId);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtSetDevice failed. ERROR: %d\n", ret); return ret);
  ret = aclrtCreateStream(stream);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtCreateStream failed. ERROR: %d\n", ret); return ret);
  return 0;
}

template <typename T>
int CreateAclTensor(const std::vector<T>& hostData, const std::vector<int64_t>& shape, void** deviceAddr,
                    aclDataType dataType, aclTensor** tensor) {
  auto size = GetShapeSize(shape) * sizeof(T);
  // Call aclrtMalloc to allocate device-side memory.
  auto ret = aclrtMalloc(deviceAddr, size, ACL_MEM_MALLOC_HUGE_FIRST);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtMalloc failed. ERROR: %d\n", ret); return ret);
  // Call aclrtMemcpy to copy host-side data to device-side memory.
  ret = aclrtMemcpy(*deviceAddr, size, hostData.data(), size, ACL_MEMCPY_HOST_TO_DEVICE);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtMemcpy failed. ERROR: %d\n", ret); return ret);

  // Compute strides for contiguous tensor.
  std::vector<int64_t> strides(shape.size(), 1);
  for (int64_t i = shape.size() - 2; i >= 0; i--) {
    strides[i] = shape[i + 1] * strides[i + 1];
  }

  // Call the aclCreateTensor API to create an aclTensor.
  *tensor = aclCreateTensor(shape.data(), shape.size(), dataType, strides.data(), 0, aclFormat::ACL_FORMAT_ND,
                            shape.data(), shape.size(), *deviceAddr);
  return 0;
}

int main() {
  // 1. (Boilerplate) Initialize the device/stream. See the acl API manual.
  // Fill in the deviceId based on the actual device.
  int32_t deviceId = 0;
  aclrtStream stream;
  auto ret = Init(deviceId, &stream);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("Init acl failed. ERROR: %d\n", ret); return ret);

  // 2. Construct the input and output. Custom construction is required based on the API.
  std::vector<int64_t> selfShape = {4, 2};
  std::vector<int64_t> outShape = {4, 2};
  void* selfDeviceAddr = nullptr;
  void* outDeviceAddr = nullptr;
  aclTensor* self = nullptr;
  aclTensor* out = nullptr;
  std::vector<int64_t> selfHostData = {1, 1, 2, 3, 4, 5, 6, 7};
  std::vector<int64_t> outHostData = {0, 0, 0, 0, 0, 0, 0, 0};
  // Create the self aclTensor.
  ret = CreateAclTensor(selfHostData, selfShape, &selfDeviceAddr, aclDataType::ACL_INT64, &self);
  CHECK_RET(ret == ACL_SUCCESS, return ret);
  // Create the out aclTensor.
  ret = CreateAclTensor(outHostData, outShape, &outDeviceAddr, aclDataType::ACL_INT64, &out);
  CHECK_RET(ret == ACL_SUCCESS, return ret);

  // 3. Call the CANN operator library API. Replace with the specific API name.
  uint64_t workspaceSize = 0;
  aclOpExecutor* executor;
  // Call the first-phase API of aclnnBitwiseNot.
  ret = aclnnBitwiseNotGetWorkspaceSize(self, out, &workspaceSize, &executor);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclnnBitwiseNotGetWorkspaceSize failed. ERROR: %d\n", ret); return ret);
  // Apply for device memory based on the workspaceSize calculated by the first-phase API.
  void* workspaceAddr = nullptr;
  if (workspaceSize > 0) {
    ret = aclrtMalloc(&workspaceAddr, workspaceSize, ACL_MEM_MALLOC_HUGE_FIRST);
    CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("allocate workspace failed. ERROR: %d\n", ret); return ret);
  }
  // Call the second-phase API of aclnnBitwiseNot.
  ret = aclnnBitwiseNot(workspaceAddr, workspaceSize, executor, stream);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclnnBitwiseNot failed. ERROR: %d\n", ret); return ret);

  // 4. (Boilerplate) Synchronously wait for task execution to complete.
  ret = aclrtSynchronizeStream(stream);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("aclrtSynchronizeStream failed. ERROR: %d\n", ret); return ret);

  // 5. Obtain the output value and copy the result from the device memory to the host memory. Modify based on the specific API definition.
  auto size = GetShapeSize(outShape);
  std::vector<int64_t> resultData(size, 0);
  ret = aclrtMemcpy(resultData.data(), resultData.size() * sizeof(resultData[0]), outDeviceAddr,
                    size * sizeof(resultData[0]), ACL_MEMCPY_DEVICE_TO_HOST);
  CHECK_RET(ret == ACL_SUCCESS, LOG_PRINT("copy result from device to host failed. ERROR: %d\n", ret); return ret);
  for (int64_t i = 0; i < size; i++) {
    LOG_PRINT("result[%ld] is: %ld\n", i, resultData[i]);
  }

  // 6. Release aclTensor. Modify based on the specific API definition.
  aclDestroyTensor(self);
  aclDestroyTensor(out);

  // 7. Release device resources. Modify based on the specific API definition.
  aclrtFree(selfDeviceAddr);
  aclrtFree(outDeviceAddr);
  if (workspaceSize > 0) {
    aclrtFree(workspaceAddr);
  }
  aclrtDestroyStream(stream);
  aclrtResetDevice(deviceId);
  aclFinalize();
  return 0;
}