Functions and Restrictions
Function Description
Video Decoder (VDEC) decodes videos. After internal VPC processing, VDEC outputs images in specified formats. For details, see Restrictions on Stream/Image Formats, Width and Height Alignment, and Buffers.
Resolution Restrictions
- Input stream resolution range:
Model
Resolution Range
Atlas A3 training products /Atlas A3 inference products Atlas A2 training products /Atlas A2 inference products Atlas inference products Atlas training products 128 × 128 to 4096 × 4096
Atlas 200I/500 A2 inference products H.264 input streams: 128 × 128 to 8192 × 8192
H.265 input streams: 128 × 128 to 5400 × 8192
- Output resolution range:
Model
Resolution Range
Atlas A3 training products /Atlas A3 inference products Atlas A2 training products /Atlas A2 inference products Atlas inference products Atlas training products 10 × 6 to 4096 × 4096
Atlas 200I/500 A2 inference products The maximum resolution of the output image is 8192 × 8192. When the width of the input stream is less than or equal to 4096, the minimum resolution of the output image is 10 × 6. Otherwise, the minimum resolution of the output image is 128 × 128.
Restrictions on Stream/Image Formats, Width and Height Alignment, and Buffers
In terms of the VDEC function, the input/output buffer lifetime is managed by the user.
- Input buffer
Call acldvppMalloc/acldvppFree or aclrtMalloc/aclrtFree to allocate or free the buffer. The buffer size is the size of space occupied by actual input streams.
The buffer allocated by calling acldvppMalloc is dedicated for processing media data. However, the address space of the dedicated buffer is limited. If buffer planning or resources are limited, you are advised to call aclrtMalloc for allocation when using the VDEC function.
- Output buffer
Call acldvppMalloc or acldvppFree to allocate or free the buffer. For details about the buffer size, see the formula in the following table.
- H.264 BP/MP/HP level 5.1 YUV420 streams (Annex-B raw video streams only)
- H.265 8-/10-bit level 5.1 YUV420 streams (Annex-B raw video streams only)
The following table lists the restrictions on the output image format, width and height alignment, and buffer size during VDEC video decoding. For details about the definition of the output image format, see acldvppPixelFormat. For details about the concepts such as width stride and height stride, see Terminology.
Model |
Output Format |
Output Width and Height |
Output Width Stride, Height Stride, and Buffer Size |
Output Width Stride, Height Stride, and Buffer Size |
|---|---|---|---|---|
General format, supported by all versions |
YUV420SP NV12 8-bit |
Width: Must be a multiple of 2. Height: Must be a multiple of 2. |
Width stride: Round up the width to the nearest multiple of 16. If the configured width of the output image is less than 16, the minimum width stride must be at least 32. Height stride: Round up the height to the nearest multiple of 2. Buffer size (in bytes) ≥ Width stride × Height stride × 3/2 |
Width stride: No alignment requirement. The value is the same as width and ranges from 10 to 24576. Height stride: No alignment requirement. The value is the same as height and ranges from 6 to 24576. Buffer size (in bytes) ≥ Width stride × Height stride × 3/2 |
YUV420SP NV21 8-bit |
||||
Only the following versions support this format: |
RGB888 |
No alignment requirement. |
Width stride: Round up the width to the nearest multiple of 16 and multiply the result by 3. Height stride: No alignment requirement. Buffer size (in bytes) ≥ Width stride × Height stride |
Width stride = Width × 3. The value ranges from 30 to 24576. Height stride: No alignment requirement. The value range from 6 to 24576. Buffer size (in bytes) ≥ Width stride × Height stride |
BGR888 |
Other Restrictions
- VDEC decodes a stream fed in frame mode.
- Bad frames or frame loss in the streams may cause VDEC frame loss.
- VDEC decodes only H.264 8-bit streams coded in interlaced mode.