(base) root@orangepiaipro:~# dmesg | grep -i error
[    1.942761] ghes_edac: Its SMBIOS info is wrong. It is doubtful that the error report would
[    7.528034] {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 0
[    7.528040] {1}[Hardware Error]: event severity: recoverable
[    7.528045] {1}[Hardware Error]:  Error 0, type: recoverable
[    7.528050] {1}[Hardware Error]:   section type: unknown, c8b328a8-9917-4af6-9a13-2e08ab2e7586
[    7.528054] {1}[Hardware Error]:   section length: 0x60
[    7.528062] {1}[Hardware Error]:   00000000: 000038fb 00001202 0014ff00 00000000  .8..............
[    7.528067] {1}[Hardware Error]:   00000010: 00000000 00000000 00000000 00000040  ............@...
[    7.528071] {1}[Hardware Error]:   00000020: 00142aa2 00000000 00000515 00000000  .*..............
[    7.528076] {1}[Hardware Error]:   00000030: fc30050e 00000000 10080010 e0000001  ..0.............
[    7.528080] {1}[Hardware Error]:   00000040: 00000000 0000007f 0c798005 00800122  ..........y."...
[    7.528085] {1}[Hardware Error]:   00000050: 00000077 00000000 00000000 00000000  w...............
[    8.236037] hns3-platform a7200000.xge1: mdio init error, ret = -5.
[    8.236096] hns3-platform a7200000.xge1: init ae_dev error, ret = -5
[    8.236122] hns3-platform: probe of a7200000.xge1 failed with error -5
[   11.747637] [ascend] [ERROR] [devdrv] [devdrv_imu_mbx_notifier 220] <colord-sane:1749> Icm msg from imu not valid. (cmd=3; sub_cmd=60)
[   12.628864] [ascend] [ERROR] [devdrv] [devdrv_imu_mbx_notifier 220] <dbus-daemon:1111> Icm msg from imu not valid. (cmd=3; sub_cmd=60)
[   12.644487] [ascend] [ERROR] [devdrv] [devdrv_imu_mbx3_notifier 173] <dbus-daemon:1111> Get mntn message. (exception_id=0xa6193215; tv_sec=1723779022; tv_usec=299463)
[   12.644567] [bbox]  desc:           [lpm get current error]
[   15.791328] [ascend] [ERROR] [ascend_manager] [devdrv_gpio_proc 663] Current pin is not multiplexed as GPIO. (ret=0)
[   16.185888] [ascend] [ERROR] [ascend_manager] [devdrv_gpio_proc 663] Current pin is not multiplexed as GPIO. (ret=0)
[   17.655681] [ascend] [ERROR] [ascend_manager] [devdrv_gpio_proc 663] Current pin is not multiplexed as GPIO. (ret=0)
[   18.431411] hisi-i2c 82070000.i2c8: hisi_i2c_handle_errors_v400: slave address not acknowledged (7bit mode)
[   18.595321] [ascend] [ERROR] [devdrv] [devdrv_imu_mbx_notifier 220] <swapper/1:0> Icm msg from imu not valid. (cmd=3; sub_cmd=60)
[   18.610947] [ascend] [ERROR] [devdrv] [devdrv_imu_mbx3_notifier 173] <swapper/1:0> Get mntn message. (exception_id=0xa6193215; tv_sec=1723807828; tv_usec=266013)
[   18.610997] [bbox]  desc:           [lpm get current error]
[   18.936690] hisi-i2c 82070000.i2c8: hisi_i2c_handle_errors_v400: slave address not acknowledged (7bit mode)
[   19.941987] hisi-i2c 82070000.i2c8: hisi_i2c_handle_errors_v400: slave address not acknowledged (7bit mode)
[   21.280595] hisi-i2c 82070000.i2c8: hisi_i2c_handle_errors_v400: slave address not acknowledged (7bit mode)
[   21.785880] hisi-i2c 82070000.i2c8: hisi_i2c_handle_errors_v400: slave address not acknowledged (7bit mode)
[   22.791160] hisi-i2c 82070000.i2c8: hisi_i2c_handle_errors_v400: slave address not acknowledged (7bit mode)
[   28.338243] hisi-i2c 82070000.i2c8: hisi_i2c_handle_errors_v400: slave address not acknowledged (7bit mode)
[   28.843540] hisi-i2c 82070000.i2c8: hisi_i2c_handle_errors_v400: slave address not acknowledged (7bit mode)
[   29.848823] hisi-i2c 82070000.i2c8: hisi_i2c_handle_errors_v400: slave address not acknowledged (7bit mode)
[   33.356104] [ascend] [ERROR] [dms_module] [dms_is_sensor_object_repeat 488] <process-manager:2964:2964> add repeat sensor, (new sensor type:0x27; name:iammgr;old sensor type:0x27;name:iammgr
[   33.356113] [ascend] [ERROR] [dms_module] [dms_sensor_add_obj_node 514] <process-manager:2964:2964> Repeated sensor object. (nodeid=0)
[   33.356117] [ascend] [ERROR] [dms_module] [dms_sensor_register_all 573] <process-manager:2964:2964> add sensor type fail. (nodeid=0)
[   33.356122] [ascend] [ERROR] [drv_soft_fault] [user_sensor_register 104] <process-manager:2964> dms register sensor failed. (dev_id=0; user_name=process-manager; node_type=1538; sensor_type=39; ret=8)
[   33.356127] [ascend] [ERROR] [drv_soft_fault] [user_dev_node_register 165] <process-manager:2964> soft sensor register failed. (sub_id=0; ret=8)
[   33.356131] [ascend] [ERROR] [drv_soft_fault] [dms_soft_node_register 288] <process-manager:2964> register user dev_node failed. (dev_id=0; user_name=process-manager; node_id=0; ret=8)
[   33.356136] [ascend] [ERROR] [drv_soft_fault] [soft_node_register 491] <process-manager:2964> register soft node failed. (dev_id=0; ret=8)
[   33.419833] [ascend] [ERROR] [dms_module] [dms_is_sensor_object_repeat 488] <easy_comm:2978:3005> add repeat sensor, (new sensor type:0x27; name:slogdmgr;old sensor type:0x27;name:slogdmgr
[   33.419845] [ascend] [ERROR] [dms_module] [dms_sensor_add_obj_node 514] <easy_comm:2978:3005> Repeated sensor object. (nodeid=0)
[   33.419849] [ascend] [ERROR] [dms_module] [dms_sensor_register_all 573] <easy_comm:2978:3005> add sensor type fail. (nodeid=0)
[   33.419855] [ascend] [ERROR] [drv_soft_fault] [user_sensor_register 104] <easy_comm:2978> dms register sensor failed. (dev_id=0; user_name=easy_comm; node_type=1543; sensor_type=39; ret=8)
[   33.419859] [ascend] [ERROR] [drv_soft_fault] [user_dev_node_register 165] <easy_comm:2978> soft sensor register failed. (sub_id=0; ret=8)
[   33.419865] [ascend] [ERROR] [drv_soft_fault] [dms_soft_node_register 288] <easy_comm:2978> register user dev_node failed. (dev_id=0; user_name=easy_comm; node_id=0; ret=8)
[   33.419869] [ascend] [ERROR] [drv_soft_fault] [soft_node_register 491] <easy_comm:2978> register soft node failed. (dev_id=0; ret=8)
[   62.341423] [drm:adp_crtc_mode_set_nofb [ascend_vdp_drm]] *ERROR* start adp_crtc_mode_set_nofb!
[   64.419161] [drm:drm_register_irq [ascend_vdp_drm]] *ERROR* request_irq 173 for drm device!
[   64.419241] [drm:adp_encoder_mode_set [ascend_vdp_drm]] *ERROR* adp_encoder_enable dif is NULL.
[   64.419288] [drm:adp_encoder_enable [ascend_vdp_drm]] *ERROR* adp_encoder_enable dif is NULL.
[  302.658637] [ascend] [ERROR] [devdrv] [devdrv_imu_mbx_notifier 220] <swapper/1:0> Icm msg from imu not valid. (cmd=3; sub_cmd=60)
[  302.674262] [ascend] [ERROR] [devdrv] [devdrv_imu_mbx3_notifier 173] <swapper/1:0> Get mntn message. (exception_id=0xa6193215; tv_sec=1723808129; tv_usec=208764)
[  302.674352] [bbox]  desc:           [lpm get current error]
[  362.382435] [drm:adp_encoder_disable [ascend_vdp_drm]] *ERROR* adp_encoder_disable dif is NULL.
[  362.499433] [drm:drm_unregister_irq [ascend_vdp_drm]] *ERROR* unrequest irq 173 for drm device!
[  603.735128] [ascend] [ERROR] [devdrv] [devdrv_imu_mbx_notifier 220] <head:7959> Icm msg from imu not valid. (cmd=3; sub_cmd=60)
[  603.750756] [ascend] [ERROR] [devdrv] [devdrv_imu_mbx3_notifier 173] <swapper/1:0> Get mntn message. (exception_id=0xa6193215; tv_sec=1723808430; tv_usec=281057)
[  603.750822] [bbox]  desc:           [lpm get current error]

(base) root@orangepiaipro:~# cat /var/log/nputools_LOG_ERR.log
[2024/08/16 11:30:29][2059][root][127.0.0.1][dcmi_i2c_operate.c,dcmi_i2c_read,167]:dcmi_i2c_read: ioctl error.

[2024/08/16 11:30:29][2059][root][127.0.0.1][dcmi_i2c_operate.c,dcmi_i2c_eep_read,215]:read i2c failed(0x20),ret is (0xffffe0b7).

[2024/08/16 11:30:29][2059][root][127.0.0.1][dcmi_i2c_operate.c,dcmi_i2c_get_data,384]:call dcmi_i2c_eep_read failed!.-8005

[2024/08/16 11:30:29][2059][root][127.0.0.1][dcmi_npu_operate.c,dcmi_get_board_info_for_develop,196]:call dcmi_i2c_read_board_id failed. err is -8005.
[2024/08/16 11:30:30][2059][root][127.0.0.1][dcmi_npu_operate.c,dcmi_i2c_get_npu_device_elable_info,1869]:dcmi_i2c_get_elable_info product name failed.0.
[2024/08/16 11:30:30][2059][root][127.0.0.1][dcmi_npu_operate.c,dcmi_i2c_get_npu_device_elable_info,1875]:dcmi_i2c_get_elable_info model failed.0.
[2024/08/16 11:30:30][2059][root][127.0.0.1][dcmi_npu_operate.c,dcmi_i2c_get_npu_device_elable_info,1881]:dcmi_i2c_get_elable_info manufacturer failed.0.
[2024/08/16 11:30:30][2059][root][127.0.0.1][dcmi_npu_operate.c,dcmi_i2c_get_npu_device_elable_info,1887]:dcmi_i2c_get_elable_info serial_number failed.0.
[2024/08/16 11:30:32][2137][root][127.0.0.1][dcmi_i2c_operate.c,dcmi_i2c_read,167]:dcmi_i2c_read: ioctl error.

[2024/08/16 11:30:32][2137][root][127.0.0.1][dcmi_i2c_operate.c,dcmi_i2c_eep_read,215]:read i2c failed(0x20),ret is (0xffffe0b7).

[2024/08/16 11:30:32][2137][root][127.0.0.1][dcmi_i2c_operate.c,dcmi_i2c_get_data,384]:call dcmi_i2c_eep_read failed!.-8005

[2024/08/16 11:30:32][2137][root][127.0.0.1][dcmi_npu_operate.c,dcmi_get_board_info_for_develop,196]:call dcmi_i2c_read_board_id failed. err is -8005.
[2024/08/16 11:30:33][2137][root][127.0.0.1][dcmi_npu_operate.c,dcmi_i2c_get_npu_device_elable_info,1869]:dcmi_i2c_get_elable_info product name failed.0.
[2024/08/16 11:30:33][2137][root][127.0.0.1][dcmi_npu_operate.c,dcmi_i2c_get_npu_device_elable_info,1875]:dcmi_i2c_get_elable_info model failed.0.
[2024/08/16 11:30:33][2137][root][127.0.0.1][dcmi_npu_operate.c,dcmi_i2c_get_npu_device_elable_info,1881]:dcmi_i2c_get_elable_info manufacturer failed.0.
[2024/08/16 11:30:33][2137][root][127.0.0.1][dcmi_npu_operate.c,dcmi_i2c_get_npu_device_elable_info,1887]:dcmi_i2c_get_elable_info serial_number failed.0.
[2024/08/16 11:30:39][2239][root][127.0.0.1][dcmi_i2c_operate.c,dcmi_i2c_read,167]:dcmi_i2c_read: ioctl error.

[2024/08/16 11:30:39][2239][root][127.0.0.1][dcmi_i2c_operate.c,dcmi_i2c_eep_read,215]:read i2c failed(0x20),ret is (0xffffe0b7).

[2024/08/16 11:30:39][2239][root][127.0.0.1][dcmi_i2c_operate.c,dcmi_i2c_get_data,384]:call dcmi_i2c_eep_read failed!.-8005

[2024/08/16 11:30:39][2239][root][127.0.0.1][dcmi_npu_operate.c,dcmi_get_board_info_for_develop,196]:call dcmi_i2c_read_board_id failed. err is -8005.
[2024/08/16 11:30:40][2239][root][127.0.0.1][dcmi_npu_operate.c,dcmi_i2c_get_npu_device_elable_info,1869]:dcmi_i2c_get_elable_info product name failed.0.
[2024/08/16 11:30:40][2239][root][127.0.0.1][dcmi_npu_operate.c,dcmi_i2c_get_npu_device_elable_info,1875]:dcmi_i2c_get_elable_info model failed.0.
[2024/08/16 11:30:40][2239][root][127.0.0.1][dcmi_npu_operate.c,dcmi_i2c_get_npu_device_elable_info,1881]:dcmi_i2c_get_elable_info manufacturer failed.0.
[2024/08/16 11:30:40][2239][root][127.0.0.1][dcmi_npu_operate.c,dcmi_i2c_get_npu_device_elable_info,1887]:dcmi_i2c_get_elable_info serial_number failed.0.
[2024/08/16 11:30:57][3059][root][127.0.0.1][dcmi_init.c,dcmi_init_board_type,543]:dsmi_get_board_info failed. ret is 27
[2024/08/16 11:30:57][3059][root][127.0.0.1][dcmi_api.c,dcmi_board_init,58]:dcmi_init_board_type failed. err is -8010.
[2024/08/16 11:30:57][3059][root][127.0.0.1][dcmi_api.c,dcmi_init,98]:dcmi_board_init failed. err is -8010
[2024/08/16 11:31:00][3117][root][127.0.0.1][dcmi_init.c,dcmi_init_board_type,543]:dsmi_get_board_info failed. ret is 27
[2024/08/16 11:31:00][3117][root][127.0.0.1][dcmi_api.c,dcmi_board_init,58]:dcmi_init_board_type failed. err is -8010.
[2024/08/16 11:31:00][3117][root][127.0.0.1][dcmi_api.c,dcmi_init,98]:dcmi_board_init failed. err is -8010
[2024/08/16 11:31:03][3224][root][127.0.0.1][dcmi_init.c,dcmi_init_board_type,543]:dsmi_get_board_info failed. ret is 27
[2024/08/16 11:31:03][3224][root][127.0.0.1][dcmi_api.c,dcmi_board_init,58]:dcmi_init_board_type failed. err is -8010.
[2024/08/16 11:31:03][3224][root][127.0.0.1][dcmi_api.c,dcmi_init,98]:dcmi_board_init failed. err is -8010
[2024/08/16 11:31:07][3302][root][127.0.0.1][dcmi_init.c,dcmi_init_board_type,543]:dsmi_get_board_info failed. ret is 27
[2024/08/16 11:31:07][3302][root][127.0.0.1][dcmi_api.c,dcmi_board_init,58]:dcmi_init_board_type failed. err is -8010.
[2024/08/16 11:31:07][3302][root][127.0.0.1][dcmi_api.c,dcmi_init,98]:dcmi_board_init failed. err is -8010
[2024/08/16 11:31:10][3344][root][127.0.0.1][dcmi_init.c,dcmi_init_board_type,543]:dsmi_get_board_info failed. ret is 27
[2024/08/16 11:31:10][3344][root][127.0.0.1][dcmi_api.c,dcmi_board_init,58]:dcmi_init_board_type failed. err is -8010.
[2024/08/16 11:31:10][3344][root][127.0.0.1][dcmi_api.c,dcmi_init,98]:dcmi_board_init failed. err is -8010
[2024/08/16 11:33:48][5090][root][192.168.0.101][dcmi_init.c,dcmi_init_board_type,543]:dsmi_get_board_info failed. ret is 27
[2024/08/16 11:33:48][5090][root][192.168.0.101][dcmi_api.c,dcmi_board_init,58]:dcmi_init_board_type failed. err is -8010.
[2024/08/16 11:33:48][5090][root][192.168.0.101][dcmi_api.c,dcmi_init,98]:dcmi_board_init failed. err is -8010