Atlas 200I DK A2开发者套件更换eMMC后使用U盘烧写eMMC,烧写完成后报错,无法自动重启
收藏回复举报
Atlas 200I DK A2开发者套件更换eMMC后使用U盘烧写eMMC,烧写完成后报错,无法自动重启
t('forum.solved') 已解决
新人帖
发表于2026-04-09 14:59:10
0 查看

烧写时的日志信息,报错在末尾

ep/rc mode: 0

Enable wdg.

#1

Pll Init ..pll[0] inited

pll[2] inited

pll[3] inited

pll[4] inited

pll[5] inited

OK.

reset src:0x0000e4b6

lsadc dreset ok

lsadc0 init ok

adc0in0:11 adc0in1:12 adc0in2:91

adc1in2:92 adc1in3:587

adc boardId:51100

Load slave hboot1_a

Load slave hilink25

hboot1a hash a082466e.

Boot Entry.

Load slave hboot1_b

[0.089] [BOOT_TRACE]1b start

current[3], last[99]

Dfx init l2 xloader done

Hboot1_a point:[06] 01  02  05  06  11  15  00  00  00  00  00  00  00  00  00  00  00  00  00  00 

sfc set Qline.

SfcDevId: 3a25c2

Qual mode [0x42424242]

Boot entry(120)

Iso state: 0x0

pll[6] inited

pll[7] inited

pll[8] inited

pll[9] inited

pll[10] inited

Board info:

sctrl pad info:0xd0900

boardid:51100

bootmode:4

rc/ep mode:0

pg info:0

reset reason:0xe4b6

sfc mode:4byte

secure boot:1

current[4], last[99]

[0.142] [BOOT_TRACE]Load slave userbasecfg

non-secure vef success!

invalid strategy offset 1.

Cfg type-1 no cfg info.

No info in userBaseConfig

current[5], last[99]

[0.157] [BOOT_TRACE]Load slave sysbasecfg

SyscfgProc [345|0|1]

Select a power level based on the low power consumption configuration.!

Update bitmap: 0xf 0x1 0x1 0x0 0x3 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x1 0x5 0x5 0x33

bitmap info update load success

SyscfgProc [347|0|1]

write share info ok

write nosec share info ok

current[6], last[99]

[0.192] [BOOT_TRACE]Load slave lpddr

[0.226] [BOOT_TRACE]Dreset Ts OK

current[7], last[99]

[0.241] [BOOT_TRACE]Load slave hsmtag

current[8], last[99]

[0.264] [BOOT_TRACE]Load slave atf

report atf info to ddr OK

current[9], last[99]

[0.305] [BOOT_TRACE]Load slave hboot2

report uefi info to ddr OK

PCIE0/1/2/3 RC Config Preset OK.

use macro setting from syscfg

macro[0] protocols:

    ds[0] : PCIE

    ds[1] : PCIE

    ds[2] : PCIE

    ds[3] : PCIE

macro[1] protocols:

    ds[0] : PCIE

    ds[1] : USB 

    ds[2] : USB 

    ds[3] : USB 

Macro[0] power up (time 455ms)

[0.226] [BOOT_TRACE] ddr init start

Dis all msd

swapType: 0x1

Zq cal start

Zq cal ok

C0 R1 S4Macro[1] power up (time 501ms)

66

C4 R1 S400 M1,R36666

C5 R1 S400 M1,R36666

ChMap: 0x33

ddr freq: 1596

iecc disable

Rpt 0x1000, fb 0x400, msdw 0x1000

[0.497] [BOOT_TRACE] ddr init end

current[12], last[99]

cp_area_l2buf_2_ddr

Dfx init ddr done

Backup bbox data

Copy cfg OK.

Copy cfg OK.

Copy ddr Cache done.

current[13], last[99]

[0.560] [BOOT_TRACE]finish image load.

current[28], last[99]

current[70], last[99]

[568.568]Dreset main core...

Jump to HSM...

NOTICE:  Mp conf...NOTICE:  ok

NOTICE:  Booting Trusted Firmware

NOTICE:  BL1: 

NOTICE:  BL1: Built : 

NOTICE:  BL1: Booting BL2

NOTICE:  BL2: 

NOTICE:  BL2: Built : 

NOTICE:  BL1: Booting BL31

NOTICE:  BL31: 

NOTICE:  BL31: Built : 

NOTICE:  HSM boot keypoint 0x7807f!

NOTICE:  A55 wfi ...NOTICE:  OK

NOTICE:  A55 close

NOTICE:  jumper to uefi [676]

current keypoint[71], last keypoint[99].

[3.137] [BOOT_TRACE] auto boot.

Usb Boot Entry.

Success open USB device: 2

SYS Enable:0x0, gpio:0x4

RecEnable:0x0, GpioStatus:0x0

current keypoint[89], last keypoint[99].

start load os image

Boot2 flag:0x1, last Cnt:0x4, current Cnt:0x5.

Current start mode :0x195F00 not support.

boot: slave.

ep/rc mode: 0

Enable wdg.

#1

Pll Init ..pll[0] inited

pll[2] inited

pll[3] inited

pll[4] inited

pll[5] inited

OK.

reset src:0x00000001

lsadc dreset ok

lsadc0 init ok

adc0in0:12 adc0in1:14 adc0in2:93

adc1in2:92 adc1in3:588

adc boardId:51100

Load main hboot1_a

Load main hilink25

hboot1a hash a082466e.

Boot Entry.

Load main hboot1_b

[0.089] [BOOT_TRACE]1b start

current[3], last[0]

Dfx init l2 xloader done

Hboot1_a point:[06] 01  02  05  06  11  15  21  65  28  95  198  11  00  128  209  137  96  117  49  220 

sfc set Qline.

SfcDevId: 3a25c2

Qual mode [0x42424242]

Boot entry(120)

Iso state: 0x0

pll[6] inited

pll[7] inited

pll[8] inited

pll[9] inited

pll[10] inited

Board info:

sctrl pad info:0xd0900

boardid:51100

bootmode:4

rc/ep mode:0

pg info:0

reset reason:0x1

sfc mode:4byte

secure boot:1

current[4], last[0]

[0.142] [BOOT_TRACE]Load main userbasecfg

non-secure vef success!

invalid strategy offset 1.

Cfg type-1 no cfg info.

No info in userBaseConfig

current[5], last[0]

[0.157] [BOOT_TRACE]Load main sysbasecfg

SyscfgProc [345|0|1]

Select a power level based on the low power consumption configuration.!

Update bitmap: 0xf 0x1 0x1 0x0 0x3 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x1 0x5 0x5 0x33

bitmap info update load success

SyscfgProc [347|0|1]

write share info ok

write nosec share info ok

current[6], last[0]

[0.192] [BOOT_TRACE]Load main lpddr

[0.226] [BOOT_TRACE]Dreset Ts OK

current[7], last[0]

[0.241] [BOOT_TRACE]Load main hsmtag

current[8], last[0]

[0.264] [BOOT_TRACE]Load main atf

report atf info to ddr OK

current[9], last[0]

[0.305] [BOOT_TRACE]Load main hboot2

report uefi info to ddr OK

PCIE0/1/2/3 RC Config Preset OK.

use macro setting from syscfg

macro[0] protocols:

    ds[0] : PCIE

    ds[1] : PCIE

    ds[2] : PCIE

    ds[3] : PCIE

macro[1] protocols:

    ds[0] : PCIE

    ds[1] : USB 

    ds[2] : USB 

    ds[3] : USB 

Macro[0] power up (time 455ms)

[0.226] [BOOT_TRACE] ddr init start

Dis all msd

swapType: 0x1

Zq cal start

Zq cal ok

C0 R1 S400 M1,R36666

C1 R1 S400 M1,R36666

C4 R1 S400 M1,R36666

C5 RMacro[1] power up (time 501ms)

ddr freq: 1596

iecc disable

Rpt 0x1000, fb 0x400, msdw 0x1000

[0.492] [BOOT_TRACE] ddr init end

current[12], last[0]

Dfx init ddr done

Init bbox data region

Copy cfg OK.

Copy cfg OK.

Copy ddr Cache done.

current[13], last[0]

[0.627] [BOOT_TRACE]finish image load.

current[28], last[0]

current[70], last[0]

[635.635]Dreset main core...

Jump to HSM...

NOTICE:  Mp conf...NOTICE:  ok

NOTICE:  Booting Trusted Firmware

NOTICE:  BL1: 

NOTICE:  BL1: Built : 

NOTICE:  BL1: Booting BL2

NOTICE:  BL2: 

NOTICE:  BL2: Built : 

NOTICE:  BL1: Booting BL31

NOTICE:  BL31: 

NOTICE:  BL31: Built : 

NOTICE:  HSM boot keypoint 0x7807f!

NOTICE:  A55 wfi ...NOTICE:  OK

NOTICE:  A55 close

NOTICE:  jumper to uefi [742]

current keypoint[71], last keypoint[0].

[3.195] [BOOT_TRACE] auto boot.

Usb Boot Entry.

Success open USB device: 2

SYS Enable:0x0, gpio:0x4

RecEnable:0x0, GpioStatus:0x0

current keypoint[89], last keypoint[0].

start load os image

Boot2 flag:0x0, last Cnt:0x0, current Cnt:0x1.

Current start mode :0x0 not support.

boot: main.

[7.313] [BOOT_TRACE]  load image success.

load crl from Storage media

current keypoint[90], last keypoint[0].

waiting for hsm ..OK

[7.340] [BOOT_TRACE] Tee Load Start.

NOTICE:  pub crl does not exist, pub_crl_size = 0x8004!

NOTICE:  pub crl broken, update crl ok!

NOTICE:  cms verify process success.

NOTICE:  #TEE Start#

NOTICE:  #TEE End#

NOTICE:  hw_start_tee done!

[7.675] [BOOT_TRACE] Tee Load Done.

current keypoint[95], last keypoint[0].

7676 Image.

7789 Done.

[7.789] [BOOT_TRACE]  Filesystem Check Start, BootMode = 0x8.

[9.127] [BOOT_TRACE]  Filesystem Check Done.

9127 DTB.

9132 Done.

[/dev/mmcblk1p2]

SecId:80 0 C7 9C

SecId:80 0 C7 9C

IsColdBoot index|max[0|0] Status[0x1]

Reboot reason Str:  reboot_reason=DEVICE_COLDBOOT.

Fdt delete sata Subnode

ras init done

jump kernel(9157).

current keypoint[99], last keypoint[0].

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x001fd022]

[    0.000000] Linux version 5.10.0+ (liukuiyong@liukuiyong) (aarch64-target-linux-gnu-gcc (Do-Compiler V100R001C30B0027) 7.3.0, GNU ld (Do-Compiler V100R001C30B0027) 2.38) #1 SMP Wed Apr 8 15:30:47 CST 2026

[    0.000000] Machine model: Hisilicon PhosphorHi1910B evb

[    0.000000] earlycon: pl11 at MMIO32 0x00000000c4010000 (options '')

[    0.000000] printk: bootconsole [pl11] enabled

NOTICE:  mpidr on 100

NOTICE:  mpidr on 200

NOTICE:  mpidr on 300

[    0.013204] KASLR disabled due to lack of seed

[    2.719095] Initramfs unpacking failed: invalid magic at start of compressed archive

[    2.883698] pinctrl-single 82320000.pinmux: please update dts to use #pinctrl-cells = <1>

[    2.892290] pinctrl-single c4000000.pinmux: please update dts to use #pinctrl-cells = <1>

[    2.900931] pinctrl-single 400140000.pinmux: please update dts to use #pinctrl-cells = <1>

[    2.909540] pinctrl-single 3001d0000.pinmux: please update dts to use #pinctrl-cells = <1>

[    2.919617] pci_bus 0000:00: Unknown NUMA node; performance will be reduced

[    2.929829] pci_bus 0001:08: Unknown NUMA node; performance will be reduced

[    2.949093] cacheinfo: Unable to detect cache hierarchy for CPU 0

[    2.964089] mpam_device: Not support to register irq 0

[    2.969230] mpam_device: Not support to register irq 0

[    2.985748] pcieport 0000:00:00.0: of_irq_parse_pci: failed with rc=-22

[    2.994158] pcieport 0001:08:00.0: of_irq_parse_pci: failed with rc=-22

Starting version v249-43.h42.eulerosv2r12

[    3.044668] drv_mem_ctrl: loading out-of-tree module taints kernel.

[DEBUG] Thu Jan  1 00:00:03 UTC 1970 insmod /usr/local/lib/drv_mem_ctrl.ko succ

[DEBUG] Thu Jan  1 00:00:03 UTC 1970 insmod /usr/local/lib//ascend_bootdot.ko succ

[DEBUG] Thu Jan  1 00:00:03 UTC 1970 insmod /usr/local/lib//svm.ko succ

[DEBUG] Thu Jan  1 00:00:03 UTC 1970 insmod /usr/local/lib//ascend_kernel_adapt.ko succ

[DEBUG] Thu Jan  1 00:00:03 UTC 1970 insmod drv_davinci_intf.ko succ

[DEBUG] Thu Jan  1 00:00:03 UTC 1970 insmod /usr/local/lib//ascend_uda.ko succ

[DEBUG] Thu Jan  1 00:00:03 UTC 1970 insmod /usr/local/lib//dbl_board_config.ko succ

[DEBUG] Thu Jan  1 00:00:03 UTC 1970 insmod /usr/local/lib//dbl_cfg_persistent.ko succ

[DEBUG] Thu Jan  1 00:00:03 UTC 1970 insmod /usr/local/lib//dbl_algorithm.ko succ

[DEBUG] Thu Jan  1 00:00:03 UTC 1970 insmod /usr/local/lib//dbl_dev_identity.ko succ

[DEBUG] Thu Jan  1 00:00:03 UTC 1970 insmod /usr/local/lib//dbl_runenv_config.ko succ

[DEBUG] Thu Jan  1 00:00:03 UTC 1970 insmod /usr/local/lib//dbl_chip_config.ko succ

[DEBUG] Thu Jan  1 00:00:03 UTC 1970 insmod /usr/local/lib//mntn_bbox.ko succ

[DEBUG] Thu Jan  1 00:00:03 UTC 1970 insmod sysmonitor.ko succ

[DEBUG] Thu Jan  1 00:00:03 UTC 1970 insmod /usr/local/lib//drv_sys_ctrl_uniform.ko su[    3.625872] [tzdriver] (229, insmod)tee_agent_kernel_init: agent id 1253990808 has no init function

cc

[DEBUG] Thu Jan  1 00:00:03 UTC 1970 insmod /usr/local/lib//usb-storage.ko succ

[DEBUG] Thu Jan  1 00:00:03 UTC 1970 insmod /usr/local/lib//drv_gpio_uniform.ko succ

[DEBUG] Thu Jan  1 00:00:03 UTC 1970 insmod /usr/local/lib//tzdriver.ko succ

[DEBUG] Thu Jan  1 00:00:03 UTC 1970 insmod /usr/local/lib//hsm_firmware_update.ko succ

[DEBUG] Thu Jan  1 00:00:03 UTC 1970 insmod /usr/local/lib//hsm_flash.ko succ

[DEBUG] Thu Jan  1 00:00:03 UTC 1970 insmod /usr/local/lib//hsm_heartbeat.ko succ

[DEBUG] Thu Jan  1 00:00:03 UTC 1970 insmod /usr/local/lib//drv_user_cfg.ko succ

[DEBUG] Thu Jan  1 00:00:03 UTC 1970 insmod /usr/local/lib//drv_ascend_ctl.ko succ

[DEBUG] Thu Jan  1 00:00:03 UTC 1970 insmod /usr/local/lib//drv_ascend_devmng.ko succ

[DEBUG] Thu Jan  1 00:00:03 UTC 1970 insmod /usr/local/lib//ascend_soc_resmng.ko succ

[DEBUG] Thu Jan  1 00:00:03 UTC 1970 insmod /usr/local/lib//drv_dfm.ko succ

[DEBUG] Thu Jan  1 00:00:03 UTC 1970 insmod /usr/local/lib//ascend_urd.ko succ

insmod: ERROR: could not load module /usr/local/lib//drv_pcierc_sr.ko: No such file or directory

[DEBUG] Thu Jan  1 00:00:03 UTC 1970 insmod /usr/local/lib//drv_pcierc_sr.ko fail

[DEBUG] Thu Jan  1 00:00:03 UTC 1970 insmod /usr/local/lib//drv_serdes.ko succ

[DEBUG] Thu Jan  1 00:00:03 UTC 1970 insmod /usr/local/lib//ipc_drv.ko succ

[DEBUG] Thu Jan  1 00:00:03 UTC 1970 insmod /usr/local/lib//drv_icm.ko succ

[DEBUG] Thu Jan  1 00:00:03 UTC 1970 insmod /usr/local/lib//ascend_dms_dtm.ko succ

[DEBUG] Thu Jan  1 00:00:03 UTC 1970 insmod /usr/local/lib//ascend_trs_tsmng.ko succ

[DEBUG] Thu Jan  1 00:00:03 UTC 1970 insmod /usr/local/lib//drv_pkicms.ko succ

[    3.952605] [ascend] [ERROR] [user_cfg_drv] [dev_user_cfg_init_cpu_info 252] <insmod:293,293> Ctrl cpu information got failed. (dev_id=0; ret=-22)

[    3.965739] [ascend] [ERROR] [user_cfg_drv] [dev_user_cfg_get_cpu_number 306] <insmod:293,293> Failed to invoke the dev_user_cfg_init_cpu_info. (ret=-22)

[    3.979464] [ascend] [ERROR] [vmng_dev] [vmngd_resource_get_aicpu_info 106] <insmod:293> Get cpu info failed, use default value.(dev_id=0)

[DEBUG] Thu Jan  1 00:00:03 UTC 1970 insmod /usr/local/lib//ascend_virtmng_dev.ko succ

[DEBUG] Thu Jan  1 00:00:04 UTC 1970 insmod /usr/local/lib//drv_fpdc.ko succ

[DEBUG] Thu Jan  1 00:00:04 UTC 1970 insmod /usr/local/lib//ascend_dms_smf.ko succ

[    4.051926] [ascend] [ERROR] [dms_module] [get_eventinfo_from_config 329] <insmod:301:301> event config file is not exit.

[    4.063101] devdrv_manager davinci_manager: DMA mask not set

[DEBUG] Thu Jan  1 00:00:04 UTC 1970 insmod /usr/local/lib//drv_devmng.ko succ

[DEBUG] Thu Jan  1 00:00:04 UTC 1970 insmod /usr/local/lib//drv_e2prom.ko succ

[DEBUG] Thu Jan  1 00:00:04 UTC 1970 insmod /usr/local/lib//hnae3.ko succ

[DEBUG] Thu Jan  1 00:00:04 UTC 1970 insmod /usr/local/lib//hns3.ko succ

[    4.131431] hclgeplf: Unknown symbol hal_kernel_qos_node_register (err -2)

[    4.140797] hclgeplf: Unknown symbol hal_kernel_qos_node_unregister (err -2)

insmod: ERROR: could not insert module /usr/local/lib//hclgeplf.ko: Unknown symbol in module

[DEBUG] Thu Jan  1 00:00:04 UTC 1970 insmod /usr/local/lib//hclgeplf.ko fail

[DEBUG] Thu Jan  1 00:00:04 UTC 1970 insmod /usr/local/lib//8021q.ko succ

[DEBUG] Thu Jan  1 00:00:04 UTC 1970 insmod /usr/local/lib//drv_mttcan.ko succ

[DEBUG] Thu Jan  1 00:00:04 UTC 1970 insmod /usr/local/lib//drv_soft_fault.ko succ

[DEBUG] Thu Jan  1 00:00:04 UTC 1970 insmod /usr/local/lib//ascend_qos.ko succ

[DEBUG] Thu Jan  1 00:00:04 UTC 1970 insmod /usr/local/lib//drv_dp_proc_mng.ko succ

[DEBUG] Thu Jan  1 00:00:04 UTC 1970 insmod /usr/local/lib//bonding.ko succ

[DEBUG] Thu Jan  1 00:00:04 UTC 1970 insmod /usr/local/lib//udc-core.ko succ

[DEBUG] Thu Jan  1 00:00:04 UTC 1970 insmod /usr/local/lib//libcomposite.ko succ

[DEBUG] Thu Jan  1 00:00:04 UTC 1970 insmod /usr/local/lib//u_ether.ko succ

[DEBUG] Thu Jan  1 00:00:04 UTC 1970 insmod /usr/local/lib//usb_f_ecm.ko succ

[DEBUG] Thu Jan  1 00:00:04 UTC 1970 insmod /usr/local/lib//usb_f_rndis.ko succ

[DEBUG] Thu Jan  1 00:00:04 UTC 1970 insmod /usr/local/lib//usb_f_mass_storage.ko succ

/usr/bin/insmod_usb_ko.sh: line 124: usb_func_init: command not found

[DEBUG] Thu Jan  1 00:00:04 UTC 1970 insmod /usr/local/lib//drv_hiusbc.ko succ

[DEBUG] Thu Jan  1 00:00:04 UTC 1970 insmod /usr/local/lib//xhci-hcd.ko succ

[DEBUG] Thu Jan  1 00:00:04 UTC 1970 insmod /usr/local/lib//xhci-plat-hcd.ko succ

/dev/mmcblk0 exist

/dev/sda2 recoverfs-*-eMMC.img buring. /dev/mmcblk0

if=/mnt/sda2/opt/recoverfs-openEuler-eMMC.img of=/dev/mmcblk0 bs=1M oflag=sync status=progress

2369781760 bytes (2.4 GB, 2.2 GiB) copied, 26 s, 91.1 MB/s

2320+0 records in

2320+0 records out

2432696320 bytes (2.4 GB, 2.3 GiB) copied, 27.1729 s, 89.5 MB/s

/dev/sda2 recoverfs-*-eMMC.img burn over. /dev/mmcblk0

emmc has been burned

NOTICE:  Int ID:174, syscnt:0xb2844789

NOTICE:  intNum 174, nodeStatus1 0x40 !

NOTICE:  [RasCbbCommonHandler]:[71L] moduleBase c1260000 

NOTICE:  [RasCbbCommonHandler]:[81] UE

NOTICE:  [Module] MATA0 

NOTICE:  [FillHisiModuleErrorInfo]:[275L] moduleID = 0x14 

NOTICE:  [Module] MATA0 

NOTICE:  SubSysID:0xff, DeviceID:0x0, SubSysNum:0x0

NOTICE:  RECOVERABLE!

NOTICE:  HestNotifiedOS

NOTICE:  [RasCbbCommonHandler]:[89] Handler end

NOTICE:  base = 0xc1260000 

NOTICE:  ERR_FRL = 0x142aa2 

NOTICE:  ERR_FRH = 0x0 

NOTICE:  ERR_CTRLL = 0x515 

NOTICE:  ERR_CTRLH = 0x0 

NOTICE:  ERR_STATUSL = 0xfc30050e 

NOTICE:  ERR_STATUSH = 0x0 

NOTICE:  ERR_ADDRL   = 0x80000000 

NOTICE:  ERR_ADDRH   = 0xe0000001 

NOTICE:  ERR_MISC0L  = 0x0 

NOTICE:  ERR_MISC0H  = 0x0 

NOTICE:  ERR_MISC1L  = 0x5083005 

NOTICE:  ERR_MISC1H  = 0x800122 

NOTICE:  el3_int exit!

我要发帖子