通过FP Buffer存放量化参数实现高效随路量化
【优先级】高
【描述】算子实现中对矩阵乘结果进行量化计算时，可将量化参数搬运到C2PIPE2GM（Fixpipe Buffer)上，调用一次Fixpipe接口实现矩阵乘结果的量化计算。相比于将矩阵乘的结果从CO1（L0C）搬运到GM，再从GM搬运到UB，在UB进行量化计算的过程，数据搬运的次数更少，内存使用效率更高。
本性能优化手段仅针对
图1 反例数据流图
图2 正例数据流图
【反例】
对矩阵乘结果进行量化计算的过程如下：
- 将矩阵乘的结果从CO1搬运到workspace上；
- 再从workspace搬运到UB上；
- 将量化参数搬运到UB上，和矩阵乘的结果一起在UB上进行一系列量化计算；
- 将最终量化结果从UB搬运到GM上。
相比于正确示例多增加了CO1->workspace、workspace->UB的搬运过程和量化的vector计算。
...
// 该样例仅做示例说明，非完整代码，省略了部分同步控制代码
public:
__aicore__ inline KernelSample()
{
aSize = m * k;
bSize = k * n;
cSize = m * n;
}
__aicore__ inline void Init(__gm__ uint8_t *a, __gm__ uint8_t *b, __gm__ uint8_t *c, __gm__ uint8_t *deqTensor)
{
aGM.SetGlobalBuffer((__gm__ half *)a);
bGM.SetGlobalBuffer((__gm__ half *)b);
cGM.SetGlobalBuffer((__gm__ float *)c);
deqGM.SetGlobalBuffer((__gm__ half *)deqTensor);
pipe.InitBuffer(inQueueA1, 1, aSize * sizeof(half));
pipe.InitBuffer(inQueueA2, 1, aSize * sizeof(half));
pipe.InitBuffer(inQueueB1, 1, bSize * sizeof(half));
pipe.InitBuffer(inQueueB2, 2, bSize * sizeof(half));
pipe.InitBuffer(outQueueCO1, 1, cSize * sizeof(float));
pipe.InitBuffer(inQueueSrc0, 1, cSize * sizeof(float));
pipe.InitBuffer(inQueueTmp, 1, cSize * sizeof(half));
pipe.InitBuffer(inQueueDeq, 1, cSize * sizeof(half));
pipe.InitBuffer(outQueueDst, 1, cSize * sizeof(int8_t));
}
__aicore__ inline void Process()
{
CopyIn();
SplitA();
SplitB();
Compute();
CopyOut();
CopyIn1();
Compute1();
CopyOut1();
}
private:
__aicore__ inline void CopyIn()
{
LocalTensor<half> a1Local = inQueueA1.AllocTensor<half>();
LocalTensor<half> b1Local = inQueueB1.AllocTensor<half>();
LocalTensor<half> deqLocal = inQueueDeq.AllocTensor<half>();
Nd2NzParams dataCopyA1Params;
dataCopyA1Params.ndNum = 1;
dataCopyA1Params.nValue = m;
dataCopyA1Params.dValue = k;
dataCopyA1Params.srcNdMatrixStride = 0;
dataCopyA1Params.srcDValue = k;
dataCopyA1Params.dstNzC0Stride = m;
dataCopyA1Params.dstNzNStride = 1;
dataCopyA1Params.dstNzMatrixStride = 0;
DataCopy(a1Local, aGM, dataCopyA1Params);
Nd2NzParams dataCopyB1Params;
dataCopyB1Params.ndNum = 1;
dataCopyB1Params.nValue = k;
dataCopyB1Params.dValue = n;
dataCopyB1Params.srcNdMatrixStride = 0;
dataCopyB1Params.srcDValue = n;
dataCopyB1Params.dstNzC0Stride = k;
dataCopyB1Params.dstNzNStride = 1;
dataCopyB1Params.dstNzMatrixStride = 0;
DataCopy(b1Local, bGM, dataCopyB1Params);
// 将量化参数搬运到UB
DataCopy(deqLocal, deqGM, cSize);
inQueueA1.EnQue(a1Local);
inQueueB1.EnQue(b1Local);
inQueueDeq.EnQue(deqLocal);
}
__aicore__ inline void SplitA()
{
...
}
__aicore__ inline void SplitB()
{
...
}
__aicore__ inline void Compute()
{
LocalTensor<half> a2Local = inQueueA2.DeQue<half>();
LocalTensor<half> b2Local = inQueueB2.DeQue<half>();
LocalTensor<float> c1Local = outQueueCO1.AllocTensor<float>();
MmadParams mmadParams;
mmadParams.m = m;
mmadParams.n = n;
mmadParams.k = k;
// 矩阵乘
Mmad(c1Local, a2Local, b2Local, mmadParams); // m*n
outQueueCO1.EnQue<float>(c1Local);
inQueueA2.FreeTensor(a2Local);
inQueueB2.FreeTensor(b2Local);
}
__aicore__ inline void CopyOut()
{
LocalTensor<float> c1Local = outQueueCO1.DeQue<float>();
GM_ADDR usrWorkspace = AscendC::GetUserWorkspace(workspace);
xGm.SetGlobalBuffer((__gm__ float *)(usrWorkspace));
FixpipeParamsV220 fixpipeParams;
fixpipeParams.nSize = n;
fixpipeParams.mSize = m;
fixpipeParams.srcStride = m;
fixpipeParams.dstStride = n;
fixpipeParams.ndNum = 1;
fixpipeParams.srcNdStride = 0;
fixpipeParams.dstNdStride = 0;
// 将矩阵乘的计算结果从CO1搬运到workspace
Fixpipe(xGm, c1Local, fixpipeParams);
outQueueCO1.FreeTensor(c1Local);
}
__aicore__ inline void CopyIn1()
{
// 将矩阵乘的计算结果从workspace搬运到UB
LocalTensor<float> src0Local = inQueueSrc0.AllocTensor<float>();
DataCopy(src0Local, xGm, cSize);
inQueueSrc0.EnQue(src0Local);
}
__aicore__ inline void Compute1()
{
LocalTensor<float> src0Local = inQueueSrc0.DeQue<float>();
LocalTensor<half> tmpLocal = inQueueTmp.AllocTensor<half>();
LocalTensor<half> deqLocal = inQueueDeq.DeQue<half>();
LocalTensor<int8_t> dstLocal = outQueueDst.AllocTensor<int8_t>();
// 量化计算
Cast(tmpLocal, src0Local, RoundMode::CAST_NONE, cSize);
LocalTensor<half> tmpHalfBuffer = src0Local.ReinterpretCast<half>();
Mul(tmpHalfBuffer, tmpLocal, deqLocal, cSize);
Cast(dstLocal, tmpHalfBuffer, RoundMode::CAST_NONE, cSize);
outQueueDst.EnQue<int8_t>(dstLocal);
inQueueSrc0.FreeTensor(src0Local);
inQueueTmp.FreeTensor(tmpLocal);
inQueueDeq.FreeTensor(deqLocal);
}
__aicore__ inline void CopyOut1()
{
...
}
private:
TPipe pipe;
TQue<TPosition::A1, 1> inQueueA1;
TQue<TPosition::A2, 1> inQueueA2;
TQue<TPosition::B1, 1> inQueueB1;
TQue<TPosition::B2, 1> inQueueB2;
TQue<TPosition::CO1, 1> outQueueCO1;
TQue<TPosition::VECIN, 1> inQueueDeq;
TQue<TPosition::VECIN, 1> inQueueSrc0;
TQue<TPosition::VECCALC, 1> inQueueTmp;
TQue<TPosition::VECOUT, 1> outQueueDst;
GlobalTensor<half> aGM;
GlobalTensor<half> bGM;
GlobalTensor<dst_T> cGM;
GlobalTensor<float> biasGM;
uint16_t m = 32, k = 32, n = 32;
uint16_t aSize, bSize, cSize;
...
【正例】
该算子对矩阵乘的结果进行量化计算时，可将量化参数搬运到FB(Fixpipe Buffer)上，调用一次Fixpipe接口实现矩阵乘结果的量化计算。
...
public:
__aicore__ inline KernelSample()
{
aSize = m * k;
bSize = k * n;
cSize = m * n;
}
__aicore__ inline void Init(__gm__ uint8_t *a, __gm__ uint8_t *b, __gm__ uint8_t *c, __gm__ uint8_t *deqTensor)
{
aGM.SetGlobalBuffer((__gm__ half *)a);
bGM.SetGlobalBuffer((__gm__ half *)b);
cGM.SetGlobalBuffer((__gm__ float *)c);
deqGM.SetGlobalBuffer((__gm__ uint64_t *)deqTensor);
pipe.InitBuffer(inQueueA1, 1, aSize * sizeof(half));
pipe.InitBuffer(inQueueA2, 1, aSize * sizeof(half));
pipe.InitBuffer(inQueueB1, 1, bSize * sizeof(half));
pipe.InitBuffer(inQueueB2, 2, bSize * sizeof(half));
pipe.InitBuffer(outQueueCO1, 1, cSize * sizeof(float));
pipe.InitBuffer(inQueueDeq1, 1, cSize * sizeof(uint64_t));
pipe.InitBuffer(inQueueDeq, 1, cSize * sizeof(uint64_t));
}
__aicore__ inline void Process()
{
CopyIn();
SplitA();
SplitB();
SplitDeq();
Compute();
CopyOut();
}
private:
__aicore__ inline void CopyIn()
{
LocalTensor<half> a1Local = inQueueA1.AllocTensor<half>();
LocalTensor<half> b1Local = inQueueB1.AllocTensor<half>();
LocalTensor<uint64_t> deq1Local = inQueueDeq1.AllocTensor<uint64_t>();
Nd2NzParams dataCopyA1Params;
dataCopyA1Params.ndNum = 1;
dataCopyA1Params.nValue = m;
dataCopyA1Params.dValue = k;
dataCopyA1Params.srcNdMatrixStride = 0;
dataCopyA1Params.srcDValue = k;
dataCopyA1Params.dstNzC0Stride = m;
dataCopyA1Params.dstNzNStride = 1;
dataCopyA1Params.dstNzMatrixStride = 0;
DataCopy(a1Local, aGM, dataCopyA1Params);
Nd2NzParams dataCopyB1Params;
dataCopyB1Params.ndNum = 1;
dataCopyB1Params.nValue = k;
dataCopyB1Params.dValue = n;
dataCopyB1Params.srcNdMatrixStride = 0;
dataCopyB1Params.srcDValue = n;
dataCopyB1Params.dstNzC0Stride = k;
dataCopyB1Params.dstNzNStride = 1;
dataCopyB1Params.dstNzMatrixStride = 0;
DataCopy(b1Local, bGM, dataCopyB1Params);
// 将量化参数搬运到L1上
DataCopy(deq1Local, deqGM, cSize);
inQueueA1.EnQue(a1Local);
inQueueB1.EnQue(b1Local);
inQueueDeq.EnQue(deq1Local);
}
__aicore__ inline void SplitA()
{
...
}
__aicore__ inline void SplitB()
{
...
}
__aicore__ inline void SplitDeq()
{
LocalTensor<uint64_t> deq1Local = inQueueDeq1.DeQue<uint64_t>();
LocalTensor<uint64_t> deqLocal = inQueueDeq.AllocTensor<uint64_t>();
// 将量化参数从L1->FB
DataCopy(deqLocal, deq1Local, { 1, (uint16_t)(cSize * sizeof(uint64_t) / 128), 0, 0 });
inQueueDeq.EnQue<uint61_t>(deqLocal);
inQueueDeq1.FreeTensor(deq1Local);
}
__aicore__ inline void Compute()
{
LocalTensor<half> a2Local = inQueueA2.DeQue<half>();
LocalTensor<half> b2Local = inQueueB2.DeQue<half>();
LocalTensor<float> c1Local = outQueueCO1.AllocTensor<float>();
MmadParams mmadParams;
mmadParams.m = m;
mmadParams.n = n;
mmadParams.k = k;
// 矩阵乘
Mmad(c1Local, a2Local, b2Local, mmadParams); // m*n
outQueueCO1.EnQue<float>(c1Local);
inQueueA2.FreeTensor(a2Local);
inQueueB2.FreeTensor(b2Local);
}
__aicore__ inline void CopyOut()
{
LocalTensor<float> c1Local = outQueueCO1.DeQue<float>();
LocalTensor<uint64_t> deqLocal = inQueueDeq.DeQue<uint64_t>();
SetFixpipeNz2ndFlag(1, 0, 0);
DataCopyCO12DstParams dataCopyParams;
dataCopyParams.nSize = n;
dataCopyParams.mSize = m;
dataCopyParams.srcStride = m;
dataCopyParams.dstStride = n;
dataCopyParams.quantPre = QuantMode_t::VQF322B8_PRE;
dataCopyParams.nz2ndEn = true;
// 将矩阵乘进行量化后的计算结果搬出
DataCopy(cGM, c1Local, DataCopyCO12DstParams);
outQueueCO1.FreeTensor(c1Local);
}
private:
TPipe pipe;
TQue<TPosition::A1, 1> inQueueA1;
TQue<TPosition::A2, 1> inQueueA2;
TQue<TPosition::B1, 1> inQueueB1;
TQue<TPosition::B2, 1> inQueueB2;
TQue<TPosition::C1, 1> inQueueDeq1;
TQue<TPosition::C2PIPE2GM, 1> inQueueDeq;
TQue<TPosition::CO1, 1> outQueueCO1;
GlobalTensor<half> aGM;
GlobalTensor<half> bGM;
GlobalTensor<float> cGM;
GlobalTensor<uint64_t> deqTensorGM;
uint16_t m = 32, k = 32, n = 32;
uint16_t aSize, bSize, cSize;
...
父主题： 内存优化