310I Pro 驱动下载成功 npu-smi info报错:dcmi module initialize failed.ret is -8005
收藏回复举报
310I Pro 驱动下载成功 npu-smi info报错:dcmi module initialize failed.ret is -8005
t('forum.solved') 已解决
新人帖
发表于2025-03-27 22:40:13
0 查看

驱动版本:version=24.1.rc2

Linux ecs-y37e8p 4.19.90-23.54.v2101.ky10.aarch64 #1 SMP Tue Feb 25 18:55:43 CST 2025 aarch64 aarch64 aarch64 GNU/Linux

操作系统:Kylin Linux Advanced Server V10 (Tercel)

[root@ecs-y37e8p cann]# lspci | grep Huawei 

07:00.0 Processing accelerators: Huawei Technologies Co., Ltd. Device d500 (rev 23) 

08:00.0 Processing accelerators: Huawei Technologies Co., Ltd. Device d500 (rev 23)

[root@ecs-y37e8p cann]# ./Ascend-hdk-310p-npu-driver_24.1.rc2_linux-aarch64.run  --full --install-username=root  --install-usergroup=root  --install-for-all 

Verifying archive integrity...  100%   SHA256 checksums are OK. All good. 

Uncompressing ASCEND DRIVER RUN PACKAGE  100%   

[Driver] [2025-03-27 21:15:20] [INFO]Start time: 2025-03-27 21:15:20 

[Driver] [2025-03-27 21:15:20] [INFO]LogFile: /var/log/ascend_seclog/ascend_install.log 

[Driver] [2025-03-27 21:15:20] [INFO]OperationLogFile: /var/log/ascend_seclog/operation.log 

[Driver] [2025-03-27 21:15:20] [WARNING]Do not power off or restart the system during the installation/upgrade 

[Driver] [2025-03-27 21:15:20] [INFO]set username and usergroup, root:root 

[Driver] [2025-03-27 21:15:20] [INFO]driver install type: DKMS 

[Driver] [2025-03-27 21:15:20] [INFO]upgradePercentage:10% 

[Driver] [2025-03-27 21:15:24] [INFO]upgradePercentage:30% 

[Driver] [2025-03-27 21:15:25] [INFO]upgradePercentage:40% 

[Driver] [2025-03-27 21:15:54] [INFO]upgradePercentage:90% 

[Driver] [2025-03-27 21:15:55] [INFO]Waiting for device startup... 

[Driver] [2025-03-27 21:15:56] [INFO]Device startup success 

***********all scan davinci num 0 

[Driver] [2025-03-27 21:20:59] [INFO]upgradePercentage:100% 

[Driver] [2025-03-27 21:23:36] [WARNING]There are some chips not ready, please check after reboot 

[Driver] [2025-03-27 21:23:36] [INFO]Driver package installed successfully! The new version takes effect immediately.  

[Driver] [2025-03-27 21:23:36] [INFO]End time: 2025-03-27 21:23:36 

[root@ecs-y37e8p cann]#  

[root@ecs-y37e8p cann]# npu-smi info 

dcmi module initialize failed. ret is -8005 

[root@ecs-y37e8p cann]#  

希望有大神能帮忙给点处理思路,感谢。

本帖最后由 匿名用户2025/03/28 09:41:59 编辑

我要发帖子